The Grow Awards 2026 šŸ†
Likes
Comments
Share
@valiotoro
Follow
Hello everyone šŸ‘‹ She grew fast and with a beautiful green colour on the leaves! She has responded superbly to low stress training and topping & i defoliated her aswell and seems didn't even notice šŸ˜Ž Wish you all a good day and happy growing 😁
Likes
3
Share
@TyRun
Follow
Intermediate Results Overview This grow was intense! Setting up the grow consumed so much of my time and focus that I started slacking at work, and it took me a month to get back on track. But hey, what’s the point of a job if it gets in the way of growing? šŸ˜‰ In the end, everything worked out, and I gained invaluable experience. This was my first grow using coco coir. At first, I didn’t get it, but then it just clicked! Now I’m hooked: "I’m here to stay." Coco is more controlled than soil, flushes easily, and you can introduce beneficial microbes, which thrive in it. My main takeaway from this grow? If you buy coco, don’t forget CalMag! Next time, I’ll definitely install HEPA filters at the intake. The amount of dust was insane, and the grow box pulls air like a vacuum cleaner. Watching the timelapse, you can see the box sucking in every bit of dust. I vacuumed the intake filters weekly. The plant was incredibly sticky, but that also meant it caught a lot of lint and fibers between trichomes, especially visible under a microscope. Smoking microplastics? No, thank you! --- On CO2 CO2 only works if everything else is dialed in. If the plant experiences stress from deficiencies or overfeeding, you can forget about it. Since CO2 supplementation requires turning off the exhaust fan, it’s hard to manage temperature and humidity. The plant releases so much moisture that RH jumps to 80% within minutes. It’s doable, but definitely a challenge. --- On Magnetic Fields No clue what’s happening here yet, but it’s fascinating! I’ll test again with a control sample. --- Nutrients Dreams do come true—I’ve tested almost everything Advanced Nutrients offers. It wasn’t all smooth sailing; their feeding charts need adjustments for your conditions, and you usually need to feed less than recommended. Overall, I’d say the nutrients performed 100%, and I see no reason to switch. I’ll stick with them for future grows. --- Strain This strain is reliable, though not the most productive. It flowered exactly as advertised and delivered a frosty finish. It tolerated all my mistakes like a champ—especially mold. Despite an abandoned SCROG plan turning the plant into a bouquet, there wasn’t a single mold spot, even in the densely packed lower buds that got almost no light. Zero mold issues! --- Aroma As advertised: pine, wood, and citrus. At first, I thought it smelled like grapefruit, but now I’m leaning toward bergamot. Bergamot with a classic weed aroma—a recognizable twist on the usual scent. During the grow, the smell was strong, but the carbon filter handled it perfectly. --- Flavor It’s too early to say, but the flavor is definitely there! Embarrassingly, all my past harvests tasted the same—like nothing. Just smoke. This one has a distinct sour taste. I’m excited to see how it develops after curing. --- Effect Too early for a full review, but I love what I’ve tried so far. The high lasts about three hours, with euphoria and relaxation. It’s the perfect evening strain. I’ve smoked a lot over the years, but I’ve never experienced true euphoria—until now. Guess I’ve been stuck with garbage and ditch weed before. šŸ˜… It’s not a strain for productivity or chores, but it’s perfect for chilling, watching something, or chatting. No anxiety, just great vibes. It feels like having a beer after a long day: you relax, and life feels good again. --- Roots The roots were healthy—maybe too healthy! While the AirPot (20L) prevented root circling, it didn’t eliminate it entirely. There were dead zones at the bottom where roots circled around the perimeter. A dense root mat formed at the bottom (so dense you couldn’t poke a finger through it), which likely contributed to salt buildup. Breaking through that mat required more water, and I suspect this caused EC to spike 1.5x the next day if there was no runoff. Next time, I’ll mix some pumice with the substrate at the bottom, about 3–4 cm deep. --- Timelapse I only got the timelapse running after the switch to flowering, so it’s not from the beginning. Still, it’s an incredibly useful tool for understanding growth rates. I’ll definitely use it for future grows. Comparing yesterday to today is one thing, but rewinding a week to see how things were is game-changing. I recommend it! You can even use an old phone with a timelapse app if your camera doesn’t support it by default. --- What’s Next I’ve grown fat buds before, but I’ve always neglected curing. This time, I’m doing it by the book with full control. Drying in the grow box with RH controlled at 50–60% (averaging 55%) for a slow, even dry. Temps are kept between 20–23°C, with frequent venting to keep it below 21°C for terpene preservation. After 7–10 days, when small stems snap with a characteristic sound, I’ll trim and jar them with humidity sensors. For the first two weeks, I’ll burp the jars twice daily, then reduce to once daily for the next two weeks. After that, I’ll monitor the RH sensors and adjust as needed. I’ll share the details after curing is complete. After drying, I’ll weigh the buds, take photos, and share another post in a month or two after curing to report on the flavor and aroma. For now, I’m taking a breather, fine-tuning my setup, and preparing for my next grow: Wizard Trees - Zangria S1.
Likes
8
Share
@Fa5Venom
Follow
Plants are growing really fast just giving water when soil dry. Decided to top the big bud auto seems to be growing really fast. Was only going to lst because this is my first indoor grow and don’t want to fuck it up hahah. Not much else going on this week. One of the northern lights is tiny but I have faith in it
Likes
22
Share
Alright ladies and gentlemen...welcome back to my diary. Its now the end of week 6 for this killer cross we've created and she is doing her thing! Wow! Very impressive node separation and as you can see, she has an insane amount of flower sites! I really can not wait to see what how she does in bloom. I ended up doing a little more LST to get the canopy where I want it and its still going to need some work but were close. Maybe some super cropping in the future šŸ¤”...anyways we did a little top dressing of COM Stonington blend plant food too just help her through this extra long veg period I have her going through. I need her to be nice and healthy while my little guys are playing cath up! Well thanks for stopping by.
Likes
65
Share
@3lementa1
Follow
Things are looking good. I'm in a bit of a time crunch so I think I'm going to harvest early. Sometime this week probably, just shy of 8 weeks. Cool strain to grow. Very interesting calyx formations at the crowns. I dried a couple small buds and threw them in my vape a few days later and the terpenes seem great. Can't wait to see how it tastes fully cured. I'm going to wash and decarb the buds before curing them, and I've never done that before, so I'll post that here too. Thanks to everyone who read and commented! Happy growing!
Processing
Likes
3
Share
@MMatos
Follow
Week 1 Today, I started 2 Gorilla Cookies Auto from Fastbuds. šŸŖ I'll start by giving 18 hours of light and controlling the ph 6.5 without nutrients Let's see if they want to grow or not.
Likes
12
Share
Sorry been away for so long. Been super busy at home and at work. Had turned my favorite pheno of the zkittz berry ade and turned into mother
Likes
27
Share
This week buds are super dense and getting frosty by the day. Starting to wish I made the best use of space as some of the lower canopy not recieving as much light. A little difficult to reach all plants. Arimq is very strong and citusy , pungent & fruity.
Likes
30
Share
Pungently smelly with unreal amounts of crystal it’s swelling by the day such dense rock hard buds best strain I’ve ever grown 😜 @fastbuds have absolutely cracked it with this strain it’s more then perfect 10/10 šŸ’ŖšŸ’ŖšŸ’ŖšŸ‘ Took a little sample bud today to see what she is like it seems too early but it looks done one of the plants is strange
Likes
69
Share
@nonick123
Follow
DĆ­a 80 (19/08) Riego 500 ml H2O pH 6,55 DĆ­a 81 (20/08) Riego 250 ml H2O pH 6,55 DĆ­a 82 (21/08) Riego 500 ml H2O pH 6,55 DĆ­a 83 (22/08) šŸ’„Comienza la floración! šŸ’„ No riego. DĆ­a nublado y de bajas temperaturas DĆ­a 84 (23/08) Riego 500 ml H2O pH 6,55 DĆ­a 85 (24/08) No riego. DĆ­a nublado y de bajas temperaturas DĆ­a 86 (25/08) Riego con 1 Litro de TĆ© Floración de Lurpe Solutions. Preparación: 24 horas con bomba de aire (oxigenación) con ingredientes: Healthy Harvest 8 ml/L + Insect Frass 16 ml/L + Hummus Lombriz 8 ml/L + Melaza 1 ml/L + Kelp Hidrolizado 0,25 g/L šŸ’¦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
11
Share
@Radagast_
Follow
17.08. Wedding Cake 1# Day 114# The plant was at the end of its 16th week 2 days ago, it has not yet started flowering Wedding Cake 2# Day 108# She was at the end of her 15th week 3 days ago and is very close to blooming The pictures and video are from yesterday. Stay High and Keep Growing!!!
Likes
6
Share
Vanilla Latte is very special strain for me: I've never grown the plant like this: thank you Humboldt Seed Company for such a good job
Processing
Likes
8
Share
@Max1973
Follow
Day 35 - few pics and vids..... everything going along nicely šŸ‘ This is a pretty big update, so i'll add to it over the next few days, as i finish building it all.... i'm building these 2 x SS haze, the full tent, just finishing up the setup..... trimming them, changing solutions to 12/12 and flower..... changed the exhaust fan and filter setup to the better outside the tent method.... and installed 12v CPU computer fan, lol ("alta9" fits in 4in ducting perfectly), drops wattage on extractor fan.... 10w tops... got a few kg of active carbon and making/replacing the carbon filter .... i'll add afew vids of the new setup in afew days... Day 36 - few pics/vid of new tent setup...... "alta 9" fan :) post tomorrow after i finish trimmin and settin up night mode etc...... and into tomorrow we go, lol ... Day 37.... slowly getting there..... little bit more to go... this should make things abit more interesting..... right tank (short babie) has : 19 lts of tap water @18oC + 150 ml -dutch master one gold FLOWER.... 6.4 PH - 1400 PPM left tank has : 19 lts of tap water @18oC + 50 ml of elements a and 50ml of b and 10 ml of nitro and 20ml of Crystalic (molasses/pot) .... 6.5 PH - 1200 PPM more pics / vids of the finished tent setup.... roots, transfer, etc... Day 37 is alot of vids of the clean and change to flower..... edit - day after build noticed left tank (nutrifield) not enough bubbles..... pulled out the 4 air pump and swapped to the 2 x original oxipumps... much better, also to fix the problem with ph goin high, and bubbles not stirin the mix, was to add another 10ml of crystallic and another 5ml of nitro... then pumped both tanks with ph down and set em to 5.8-6.2 - both plants have fully recovered from the big trim, and bounced back within 12-24hrs, post pics/vid in abit..... Day 39 - made a freaky video... was curious about what the plants would see looking up at the lights... the lights and buzzing of air compressors and bubbling tank water, and dazzling lights turned out pretty cool in vid editor, was in selfie mode.... and final vid of the bounceback from trim :) šŸ‘šŸ˜Ž
Likes
29
Share
Hope you are well. Thanks for taking the time. Little main line defoliation to focus growth. A cell is a quantum measuring device for light’s frequency to make order from the chaos that light frequencies bring from our environment. A cell performs mechanical resonance, where its intrinsic structures vibrate at specific resonant frequencies when exposed to external mechanical stimulation. Cells possess the ability to sense and respond to mechanical cues from their environment, a process known as mechanosensing. This can involve the activation of signaling pathways and changes in gene expression. Cellular resonance is a component of mechanotransduction, the process by which cells convert mechanical force into a biochemical signal that triggers a cellular response. Plants perceive mechanosensory stimuli, such as vibration and touch, through structures like trichomes (hairs) and specialized ion channels embedded in their cell membranes. Plants are sensitive to frequencies ranging from ultrasound to lower sound waves, such as 250 Hz. The perception depends on various factors, including the stiffness of the underlying tissue, which can be tuned by the plant to perceive specific frequencies associated with environmental cues like insect herbivory. While the exact molecular mechanisms are still being explored, scientists have identified several potential pathways that may be affected by acoustic vibrations in this frequency range: 4000-5000 Hz. Enzyme activity: Sound waves can increase the activity of certain enzymes, such as amylase, and elevate the content of soluble sugars and proteins. Increased stomatal opening in response to specific frequencies can optimize photosynthesis by increasing the plant's absorption of water and CO2. In addition to enhancing drought tolerance, sound vibrations can strengthen plants' overall resistance to stress. Studies have shown that some genes related to stress response can be activated by sound stimulation. The Emerson effect is a phenomenon where the combination of red and far-red light increases the rate of photosynthesis beyond the sum of the two wavelengths used separately. This synergy is important for understanding Extended Photosynthetically Active Radiation (ePAR), which includes the far-red spectrum, because it means a more comprehensive measurement is needed to fully understand light's effect on plant growth. ePAR meters measure light up to 750 nm, which is necessary to capture the far-red light that participates in the Emerson effect. The human eye can detect more shades of green than any other color due to a combination of our cone cell sensitivity and evolutionary history. Our eyes are most sensitive to the yellow-green part of the spectrum, which is the peak of our visual sensitivity, and a large part of our ancestry was spent needing to distinguish subtle variations in greenery for survival. or our primate ancestors, being able to discern subtle differences in green was crucial for survival. It helped them identify edible plants and avoid poisonous ones, as well as detect predators hiding in foliage. This constant need to distinguish shades of green drove the evolution of our color perception to become most sensitive to it. S-cones: Detect short wavelengths, perceived as blues and violets. M-cones: Detect medium wavelengths, perceived as greens. L-cones: Detect long wavelengths, perceived as reds and yellows. The primary reason for our enhanced sensitivity to green is that the peak sensitivities of the M-cones and L-cones are very close together in the green-yellow region of the visible spectrum. This overlap means that green light stimulates both the M-cones and L-cones, creating a more robust and detailed signal for the brain to interpret. In contrast, the S-cones are more isolated and respond to a much narrower band of light, leading to less sensitivity for blues. The brain's visual processing pathways also play a role. Our visual system processes color differences through "opponent channels," which compare the signals from different types of cones. The opponent channel that processes red versus green has a more precise and intricate system than the blue versus yellow channel, leading to finer discrimination in the green part of the spectrum.
Processing
Likes
14
Share
Start of week 7 and GSC is one happy lady. Pistil's are slowly turning orange at day 37. Tricomes are thickening and nugs are starting to put on mass. Looking forward to the weeks to come. Any suggestions or comments drop me a line. Happy Gardening šŸ™šŸ––šŸŒ±šŸ‘“šŸ¼
Likes
6
Share
@simoto
Follow
Popped, image 2 days later šŸ˜€ , added diatomaceous for gnat's and perlite
Likes
10
Share
Week 4 (2/07/22 - 2/13/22) Moved the ladies into the tent and set up Scrog Net
Likes
11
Share
I love the strain and my first autoflower did not disappoint. She grew surprisingly bushy, and she really got chunky near the end! Super happy with how she turned out. The extra couple weeks really made a difference and she smells like fruity pebbles. Delicious! Hanging for 5-7 days before stored for curing. Did final trim and storage for the buds, 50 gram dry weight total. They were more on the lighter side as far as density goes. But smell good and the high is great and was fun to grow! Was able to successfully breed her with a Durban Poison male and look forward to seeing the super sativa babies to come. All good things. Here is to the next round, cheers! šŸ˜Ž