Likes
Comments
Share
1/25/2024 Vegetation Week 3 Day 1- took 2 Tops today and cleaned up a few lower leaves that were hanging down. The FiM seems to have worked well and looks like I have three branches coming in where it was FiMed. 1/26/2024 Vegetation Week 3 Day 2- took 2 Tops from the sides and took a little of the foliage that was touching the lid. She seems to be doing very well.. Water change day tomorrow.. YAY!! will get a good picture of the roots and see how she is doing. 1/27/2024 Vegetation Week 3 Day 3- Water Change Day! I noticed a slight red coming in on the STEMS which I added a pinch of EPSOM salt to help correct. I added 36 Gallons of Water I added the following Nutes: Silica = .5Mil/Gal= 18Mil CalMag= .75Mil/Gal= 27Mil FloraMicro = 4.2Mil/Gal= 187Mil FloraGro= 3.8Mil/Gal= 137Mil FLoraBloom= 3.0Mil/Gal= 108Mil ORCA = .5Mil/Gal= 18Mil EPSOM- 1 big pinch 1/28/2024 Vegetation Week 3 Day 4- I cleaned her up just a little bit on stuff hanging down. I also made sure the PH is balanced so she could soak up the New Nutes. 1/29/2024 Vegetation Week 3 Day 5- I Got sick, Possibly food poisoned.. Luckily for me the system was able to do what it do and hold it down until I was feeling better. 1/30/2024 Vegetation Week 3 Day 6- I was still to sick to go to my grow room... Possibly food poisoned.. Luckily for me the system was able to do what it do and hold it down until I was feeling better. 1/31/2024 Vegetation Week 3 Day 7- First day back.. Her PH was down to 5.72 so I raised the PH back up closer to 6.0, I took a few pictures and got her height.. Feeling better through prayer so was able to get some pics today.
Likes
21
Share
@Rap_a_cap
Follow
Today is the harvest day of this wonderful girl. Plucked off all the main colas, the rest will mature for another week. She's ripened very well, totally defoliated, in a sunny and hot end September. In a better position she would have yelded at least twice as much. These branches will turn into super premium buds, rich of colours. This strain is simply amazing. See U ASAP for a great harvest Good luck  Growmigos
Likes
14
Share
@AndrewC
Follow
So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.
Likes
184
Share
Germination date 🌱 12/07/2021 Day 57 09/09/2021 Strain 🍁 SinCity seeds YUZU SORBET (Purple yuzu x whitenightmare) THC% • Unknown 💡 Mars Hydro FC4800 • Power draw 480W + 5% • Max coverage 5 x 5 • LED 2070pcsSamsungLM30B1&Osram660nm • Max Yield 2.5g / watt • Noise level 0 DB • Removable Driver +2m cable • Daisy chain (multiple lights) https://marshydroled.co.uk/products/mars-hydro-fc-4800-led-grow-light-samsunglm301b-commercial-greenhouse-medical-indoor-kit 🇬🇧 https://www.mars-hydro.com/buy-fc-4800-480w-4x4-energy-saving-full-spectrum-commercial-led-grow-light-mars-hydro-for-sale 🇺🇸 PROMO CODE • (ORG420) DISCOUNT 👍🏻 marshydroled.com ⛺ Mars Hydro 120 x 120 x 200cm 📤📥 AC infinity 6inch 💧 10lt dehumidifier ❄️ 3.1kw air con system 💉 Nutrients GreenBuzzLiquids Organic Grow Liquid • 1-4ml until 2wk flower Organic Bloom Liquid • 2-4ml flower stage Organic More PK • 2-4ml +wk3 of flower Organic Calmag • 1-2ml/lt whole grow Fast Plants Spray • first 3days at night lights off More Roots • 2-5ml veg +2wks flower Fast Buds • 5ml +wk2 of veg until 1wk flower Humic Acid Plus • 2-5ml whole grow Growzyme • 2-5ml whole grow Big Fruits • 2-5ml flower stage Clean Fruits • 5ml flush 1wk Ph powder Root Gel Living Organics PROMO CODE • organicnature420 15% off ✌️🏼 https://greenbuzzliquids.com/ 🥥 Growing Media • Coco Coir Notes 📝 The only one showing leaf damage. Not entirely sure what it is but doesn't seem to effecting plant growth or the other 3. Been taking off any leafs with brown spots on and to be fair its been minimal 3 or 4 at most. Did see some small fruit flys In the room so will have to give the room a spray down. Apart from that the girls are looking healthy. Lights been turned upto %75 for week 2 of flower so will see how it goes 👍🏻💡 .. girls loving the light well happy with the FC4800.. energy saving compared to the spiderfarmer. I was running spiderfarmer full power by end of veg and that was around 440w from the wall. The FC4800 has only been pulling half of that from the wall and even now at %75 is still only running 360watts.. money saver and Plants are looking beast. Nutrients are killing it, no problems at all. This is only my 2nd coco grow and 1st with this Nutrient company. Brilliant community with greenbuzz, help always at hand if you need it 👍🏻 massive thanks to both company's for letting me try out their products 💚💡💉 Happy growing fam ❤️🌱🍁👍🏻
Likes
117
Share
Hello everyone. sisters and brothers gardeners! You missed me? here I am for you in a new explosion of colors in my contents .... I hope you like them holy god .... how much glue I see on those fantastic shoots feel free to leave any comments or questions. the best harvests at all
Likes
5
Share
~4weeks old...(Triploid splitt head) aka Pseudo4Ploid..See picture...at this time i dont know what i will do with it...the smell is lite Berry dark Woody with some spices and Herbs...flower pics are from older grow day 31, and from a sister plant..they homogene at all with little Varietés and some have mutatins...lot of notes stretch 300%. Buds from top to bottom with little space between buds by the most,lot of branches,all giong up to one high only top bud is little higher.. loud smell at the second week to end. mostly sweet floral weedi mango Woody light spices..
Likes
10
Share
So far the dosi seems to be further into flowering than the bride cake. I’m noticing a potential cal/mag lock out with the dosi but I’ll continue to monitor over the course of these next few days. If signs worsen I’ll attempt to flush with lighter EC until run off readings of PH & EC are stable and will tone down the feed. 11/5/21 seems that my “mag & calcium deficiency” seems to really be nutrient burn. I am pushing these plants on their bloom diet (2.8-3.0EC) so it is to be expected however I shall continue to keep them at the same EC unless things begin to worsen 🤷‍♂️🏽 I like to limit test 😅
Likes
3
Share
We removed the lower 2-3 leaves that turned yellow and started to dry. Maybe dou can call this a defoliation Like the first time, Ztrawberriez is a blast to grow. It already has a sweet, berry flavour. Soon she will be ready...we can hardly wait, but she is fast af
Likes
4
Share
The smell is amazing believe it or not! Didn’t have high expectations when the weather was super cold at the beginning and super hot at the end with high humidity, no rain, lots of rain— outdoor is just so darn hard. At least I’ll get a couple of good joint out of it! More to follow!
Likes
1
Share
@nijuana
Follow
I had a big problem with the nutrients unfortunately I think it was an excess she was stressed I recorrected the problem
Likes
30
Share
***** Week 7 December 26 to Jan 1, 2020 - Days 43 to 49 from germination ***** Oh yeah baby.......that was a stretch week in week 6!!!.......she gained roughly 10 inches last week😀👍 Only 7 days ago I was not sure where we stood with transition and stretch but she took off by mid week last week. I expect this week to be similar to last and she will keep stretching through mid week at minimum but then likely be pretty close to end of stretch and focus on buds. Using this week to ensure we keep her tied down and try and maintain an even canopy in order to have lights at optimum height. She is consuming a couple of liters a day now and will continue this way for a few weeks I suspect. Ensuring that she is getting silica now to strengthen the branches to help support weight. She has some nice thickness to her 8 main branches reaching for the top. Good signs that she will be able to support weight of bigger buds. Its also time to get Terpinator going in full gear as well. This girl has tons of terps according to other diaries so want to ensure we support their production as well👍 Not sure if I will add Rezin from Green Planet to help with trichome production this go or not.....I wanted to stay with just Remo's line of nutes but I still have to add silica, microbes, beneficial bacteria, and enzymes........yes healthy microbes will produce beneficial enzymes but I always add them as well.......so am I really staying with just that line already??? She had more yellow leaves at the below than I realized when I pulled her out. Not what we want at this point in life so ppm have been stepped up and frequency will increase for both Fast Buds girls😀 Healthy and strong growers need the meat and potatoes!!!!! Really want the flavors to come out for this girl so I have been watching the feed and trying to make sure I don't find myself unable to flush her well enough. Finding the balance😃 Little more daily detail......... Dec 26/20, Day 43 - 2L full feed again. Had mixed up 12L yesterday. - Added 2ml/L of Microbial Mass and Piranha = 1200ppm and 5.9pH. - The girls needed their microbe allotment as we get closer to the end. - Bacteria added to help keep some of the nutrients in the media as she finishes. - next watering is more of plain water and add Terpinator. Dec 27/20, Day 44 - pots are light again in the afternoon. - 2L watering with Magnifical and Microbes and Rezin @ 2ml. Terpinator @ 3ml = 400ppm and 5.8pH - She is a hungry girl but backing off the ppm on this watering a bit. - trimmed lower branching on the outside and down low. No need for her to waist energy on four branches so cut them off. - I have added Green Planet Rezin because it has become part of my routine now for the last few grows and my girls have been frosty......continuing with it on this grow......in moderation😜 Dec 28/20, Day 45 - the girl is hungry so feeding again today with full nutrients. - 2.5L watering today, stepping up from 2L volume. - Full line of Remo, all 6 parts plus silica again @ 2ml = 1150ppm and 5.9pH Dec 29/20, Day 46 - another feeding in the morning today. Pot was really light. - 2L in the morning giving with same feed of 1150ppm and 5.9pH. - in the evening, 12 hours later, pots were pretty light so gave another 1.25L of feed that was left over for 16L mixture yesterday. - she had a total of 3.5L feed today......water tomorrow and not feed. - observing today that she is slow accepting new water into the media......root issues starting? - stripped off two lower outside branches again today that are too low. - will keep talking some lower branches from this girl this week and then leave her alone after that.......not too radical, just a few that will not amount to much in the end. Dec 30/20, Day 47 - she has not finished her stretch just yet......she is taller again this morning. - Pulled them out quickly to test the weight of the pots and they need watering again today. - The leaf colour is quite green now when you pull them out and look at them under natural light.......back off ppm next two watering's and keep CalMag, Terpinator, and microbes for now only. - 11:00am she had 2L watering with Magnifical @ 1ml, Enzymes Komplete and Microbial Mass @ 2ml = 175ppm and 5.7pH Dec 31/20, Day 48 - pots are really light this morning. - 2.5L feeding with Terpinator @ 3ml, MagNifiCal and Rezin @ 2ml Natures Candy @ 1ml = 600ppm and 5.9pH - pulled her out and trimmed off a fair bit of lower branching. Did it now before she gets too far into flower. - she has really vigorous branching so trimmed a lot of inside growth and the bottom 1/3 of her. - It was actually fairly aggressive stripping so will keep an eye on her and see how she reacts......should have added some kelp and vitamin B to the feed but didn't😶 Jan 1/21, Day 49 - watering in the morning. - 2.5L watering with CalMag, VeloKelp and Vitathrive @ 1.5ml = 400ppm and 6.0pH (Had to add Terpinator for 1ml/L to bring down the pH......missed it so added something, too much pH up was added.) - they have been given a lot of ppm this week so backing off a bit and just giving some basics as using RO water. - bud sites mid way down the stems are getting bigger and stacking more........she has some huge potential to yield but with her only in a 3 gal pot.......I feel like I shot myself in the foot and she should have certainly had a 5gal pot!!!!
Likes
10
Share
@SweetGrow
Follow
Well done rapidstart , do hiz work🤘 No technique just fold the leaves
Likes
7
Share
@Growa
Follow
Für die Kamera wurde ein Clip bestellt, solange werden auf dem Luftbefeuchter kleine Türmchen gebaut.
Likes
40
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 We finally got our calmag order, these girls were begging for it..the color is a little limey on 1:2 but she should be just fine.. plants are praying a lot, i take this as a good sign. Buds are forming fast and given the node spacing I think they'll be nice and long.. We removed most the top fans and cleared the bottom 1/3 growth from all plants this week, light penetration is awesome , we're still at 75% power with the Solux 350 but this seems to be more than adequate for now (we're trying to keep power consumption low between 4 active tents to avoid anymore power issues).. The Solux 350 is surprisingly cool, i genuinely thought we would be fighting heat with driver inside but is as cool as all other tents in the room.. not too much else to report, its been a great week!..Thanks as always for dropping by and happy harvests folks!! ⚡Hortibloom/Solux 350⚡ Specifications ⚙️: Diodes: Samsung LM281 Pro / Osram DR (1,440 total)💡 Driver: Inventronics 350 watt🔌 PPF: 1015 μmol/s ☢️ PPE: 2.9 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 14.3lbs lbs (6.5kg) Veg Coverage: 5 x 5 ft 🌱 Flowering Coverage: 4 x 4 ft 🌼 -Uses an aluminum heatsink (no fan), quiet while operating 👂⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 -May be daisy-chained via RJ14 and managed from a single controller 💡~💡~💡~💡~💡 🌎 https://hortibloom.com/products/solux-350-led-grow-light ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
24
Share
Week 8 flower Average VPD of 1.14 Pheno 3-4 are smaller plants grown with AC infinity watering bases and Build A Soil in 10 gallon pots
Likes
3
Share
4/5 days left until harvest We go now slowly and daily down with the ec
Likes
101
Share
I apologize upfront for all the photos. It was hard to pick which ones to upload, so I picked a good variety. There is gonna be between 4-6 pounds once dried/cured. These were all super dense and very little larf. This was a higher temp/higher humidity run with lots of co2 and they blew up big. It’s been a minute since I’ve grown a cola or 2 that were bigger than my arm…this time there was dozens of them. Each plant was only topped one time. The temps were usually mid 80’s and humidity in the mid 60’s during flower. This might seem high to some, but learning to apply VPD to a grow should not be trial and error, in other words, this was intentional. It’s not risky either. During the first 6 to 7 weeks of flower it is very important to not let your night time temps to go below 75 degrees. POWDERY MILDEW=LOW TEMPS AND HIGH HUMIDITY. Take one of these away and there will not be any powdery mildew! Do not let your temps go below 75! The last 2 weeks I dropped the humidity to 40% and my night temps to mid 60’s for resin production. A couple of thing one should have to create large buds is a temperature gun(for leaf temp), a par meter and co2. Keep the stomata open and feed lots of co2=huge buds. Learn about VPD and not just a quick google search! When it’s dry and cured I’ll be back for an update on weight, taste and effects. Currently the plants are drying in the room at 60 degrees and 60% humidity until I can get in there to trim them. Might be 2-3 weeks. Thanks again for all the likes and comments!
Likes
21
Share
@Siriuz
Follow
Started Week 10 Day 64 Fed them some nutes Day 65 Looking good Day 66 Outdoors for 3 hrs in the morning due to blackout T_T Rested like 6hrs zZzz no lights Day 67 Back to 20/4 schedule Everything is good Day 68 Lil defoliation Got some pics and videos for you all Day 69 Cool Juicy Video Day 70 End of week 10 Overrall she is great! Plan on to give her last meal tomorrow Floranova bloom