Recommended
Likes
1
Share
Unfortunately, one of the two seedlings succumbed to the intense sunlight exposure of a single day and exhibited classic signs of stress and stem damage, succumbing within the first week. With only one seedling remaining, I decided to proceed by faithfully following the established nutrient schedule. Here are the nutrients administered: May 8th: 250ml of water 0.5ml of RootJuice 0.5ml of BioHeaven 0.5ml of Activera EC: 450 nS pH: 6.5 May 10th: 350ml of water 1ml of RootJuice 1ml of FishMix 1ml of BioHeaven 1ml of Activera EC: 850 nS pH: 6.5
Likes
74
Share
@Targona
Follow
12/11/2023 - 84 days since my baby girl sprouted from seed/harvest time🌱 Hello friends of GrowDiaries. Toffee Pudding Auto is a strain that I had the opportunity to grow thanks to the breeder Anesia Seeds. With a THC content of 26%, Toffee Pudding Auto is one of the strongest autoflowering strains on the market. A large amount of terpenes will scent the whole room with sweet tones of caramel and fruit 🎂🍌 Technical and general parameters of the breeder Anesia Seeds: Toffee Pudding Auto is very easy to grow, making it a good choice for beginner growers 👩‍🌾👩‍🌾. But even experienced growers will be amazed by its stable nature and huge yields. The journey from germination to harvest takes only 60-65 days and produces exceptionally good results both indoors and outdoors. Plants reach an average height of 80-120 cm and are suitable for SoG. Toffee Pudding Auto grows perfectly on all substrates, but her enormous terpene profile can best be developed in organic cultivation. It offers everything you would expect from a modern autoflowering variety: strong and healthy growth, high resistance to pests and diseases and of course extremely strong yields of up to 550g per m2 or 230g per plant outdoors. Technical Specifications: Taste: reminiscent of a fresh caramel cookie with fruit dressing THC: up to 26% CBD: < 1% Size: XXL Height: 80-120 cm Flowering: 60-65 days Room: Indoor/outdoor Gender: Feminized Genes: Indica Genetics: Anesia Scout Cookies/Banana MAC/Ruderalis Autoflowering. Yes For cultivation I used: Cultivation area: 80x80x180cm 1x circulation fan: 15W 🌬️ LED lighting: Mars Hydro TS 1000 - 150W - vegetation and flowering 💡💡 Exhaust: pipe fan - RAMTT100 🌬️ Odor filter: PRO-ECO HF carbon filter 160-240m3/h - 100mm - maximum air flow up to 240m3/h 4x textile flower pots 11 l I mix the substrate: Biobizz Lightmix
Likes
16
Share
July 13: first heat wave of the year was last week, and there is another forecast for next week, but for now this is pretty ideal cannabis weather. Added a third Scrog layer and tied it off to some weights (partly filled water bottles) to open up the canopy further. Works, simple, and easy to move around the yard as needed. I really like this plant and how it’s going so far. July 14: re-scrogged again to widen the canopy further. Supercropped the ends to maintain the same elevation at the various growth tips. Four stems in middle were topped to keep them from getting ahead of the others. Experimenting to see how it goes. July 16: hot again. Increased water volume and sometimes misting air with garden hose water for the evaporative cooling. She looks great. July 17: another 32 C day. Watered four times today so likely 7-8 L in the heat with the growing plant. July 18: hot again. Mixed Power Bloom and malted Barley with some soil and added as a top dressing.Hit 34 C and 20% relative humidity which is far too hot and dry for cannabis. Lots of watering, and misting of leaves and air to provide some moisture and cooler temperatures.
Likes
16
Share
Aug 10: now done two weeks of force flowering in the garage. This was supposed to be an auto, but like a lot of other growers here, I found this didn’t autoflower. That’s okay and I forced flowering by putting her in the dark garage along with the other photoperiod plants. Hopefully these are just mis-packaged Overdose Fast seeds. Aug 13: overdose is making good progress with flower development finally kicking in after a couple weeks of forcing. Aug 14: added 3 tablespoons of a 50:50 mix of Power Bloom and malted barley as a top dressing and watered in.
Processing
Likes
2
Share
Likes
16
Share
@ThaKass
Follow
These girls are ready, going to leave them for a few more days. The smell is sweet and pine, hope it’s good. There’s lots of small to mid sized buds, really did my best to bush her out, my hard work is going to pay off. I usually wet trim and never tried a dry trim.. will be doing a dry trim on these.
Likes
72
Share
@Roberts
Follow
Auto Maxi Gom has been steadily making progress. She has started stretching, and is progressing more into flowering. I switched the feed over to blooming feed early week. I defoliated and did some lst. Everything is looking good, and nothing more to report at this time. Thank you Medic Grow. Xpert Nutrients, and Seeds Mafia. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
2
Share
@fabialien
Follow
Semana sel 2 de septiembre al 8 de septiembre 8 de septiembre, fotos del dia Jueves 5 de septiembre 2024. Se regaron con Floralicius plus adicionado con Hidrol-pez + vitaminas.
Likes
198
Share
@DevilsBud
Follow
Marshydro supported grow Spliff Seeds CBD Spliff Berry/Afghani Gold Anesia Seeds Hyper Glue/IMPERIUM X/Captain Future/Blackberry Moonrocks New week in marshydro set-up The week 5/4 plants doing great I added a extra strain in the mix the Seeds Mafia Headshot sadly only 1 survived better then nothing . I will probably start flowering phase next week depending how they grow Probably come flowering time Black berry moonrock imperium X and headshot will be put in the 100X100X180 with the TS-1000 so they can veg some more 21/10/21 Couple of days ago i catch some ladybugs to put with my plants but didn't see them but there finally reach the plants woehoe Decided to order some 11L pots to transfer them in so before flowering i probably transfer them so roots can grow some more also gone try Mycorrhiza Mix with transfer A update of using the new marshydro set-up The FC-4800 is a absolute beauty of a beast the change from growing under a marshydro TS-1000 to a FC-4800 is night and day nothing bad about the TS-1000 it deliver me a great first run with 4 plants absolutely amazing lamp to start with no doubt . But since i am growing 9 now and soon maybe 12 the FC-4800 will for fill that task with no problem what so ever 💪🏻👌🏻 Marshydro gets your bud's frosty and reaching for the ✨ Also the new 120X120X200 tent Is of class of it's own bin growing in a 100x100x180 tent and has worked fine and will stil be used for plants that are en early grow stages together with the TS-1000 . The 120x120x200 makes everything much easier for me and my back 🤣 the 2 side holes now where I can reach the back for my grow 🤘🏻🤘🏻 Also the space i have now is great for the amount of plants i will be growing i am loving it visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
7
Share
Likes
2
Share
Plants look healthy, except for a few older leaves, which appear to have some issues. Added big bud this week, lots of bud sights on each plant.
Likes
10
Share
Day 34 this lady is running, I can see flowers getting bigger every day, smell started really really soon this time so I already had to add the Carbon Filter. I’d like to close the cycle in less then 80 days. It would be great First flowering fertilisation Ph 6.2 Ppm 631 Day 37 - 9 of flower 🌸 Started blooming fertilisation, I’m keep Giving all-in one from aptus, i think I lm substitute with super pk and I stop all in one. Ph 6.2 Ppm 731 As I’m growing an solito in a 9.2 lt pots with all mix nutrients I’m slowing down with all in one and just giving base feedings, I ll decide later if I should give super-pk for the next weeks Day 40, tomorrow will be feeding days. Sge’s going really well, resin is already showing up on flowers that are several as and colorfull, smell is already there 🤤 Tomorrow update with feedings parameters. Day 41 feeding day Aptus regulator 0,15ml/1 lt Aptus all in one 1,25ml/1lt Aptus Topbooster 0,3 ml Aptus enzym + 0,5 ml Calmag 0,3 ml /L Ph 6,18 Ppm 756 Let’s see
Likes
21
Share
@DRO420
Follow
Week 2 of flowering is going well . Plants are nearing the end of the final stretch and starting to show small buds already.
Likes
37
Share
There’s a few things I’d personally change if I was to grow fat Banana again. But this time round she was very resistant to high temperatures and humidity during Flower. She holds on to nitrogen so I’d definitely feed her less on the nutrients as she is a light feeder.
Likes
41
Share
Dia 20: la planta siguen creciendo se ven mas anchas con hojas mas grandes, algunas de las plantas se han quedado pequeñas en tamaño otras están creciendo muy bien pero todas con un desarrollo bastante bueno, en su mayoría ya todas alcanzan el 7mo nudo a pesar de algunas tener un tamaño apenas de 15cm. Dia 23: ya después de pensarlo bastante he decido realizar el corte apical, algunas plantas todavía no alcanzan un gran tamaño pero si ya el 8vo nudo, también le realice una defoliación solo a las hojas abanicos de la parte baja hasta el 3er nudo. espero la recuperación pronta de las plantas para realizar el ultimo trasplante a macetas de 18 litros. Dia 25: Las plantas van creciendo muy bien con un buen desarrollo he decidido trasplantarlas de macetas, en algunas de las fotos se ve el desarrollo radicular que tienen ya este siendo el ultimo trasplante, también he colocado la malla scrog veremos que tal va. Dia 26: ya algunas de las ramas y hojas se han acomodado, he entretejido algunas ramas que ya buscaron espacio en al malla, también realizare el preventivo de todos las semanas con aceite de neem y jabón potásico.
Likes
8
Share
Hello everyone, fellow growers! welcome to peaky's gardens I had so much fun growing this little girl in a small pot and with a frame around which I twisted my plant I wanted to test her resistance and my experience
Likes
21
Share
@darb35
Follow
Last week was a short one, decided to chop them on day 80. Both plants weigh at 800g wet, hoping to get a bit over 100g dry. They could probably go for another week to get fatter, but I was feeling ready looking at the trichomes. Hope the dry slow, I can't get RH above 50% so hoping that won't be so bad.
Processing
Likes
6
Share
Esta semana quitamos productos, que termine bien de chupar todo el alimento, y que hinchen ya estás últimas semanas. .tambien lavaremos la raíces esta semana para quitar el alimento sobrante y las sales acumuladas. Empezaremos con el ESTRÉS HÍDRICO:el cual cada vez que regamos, regamos menos cantidad , así La Niña resina estas últimas semanas. Os incluyo vídeos.