A slow start but they finding their pace now. Added another light to this tent. 150 to 200W all in. Temp is steady but humidity low so added a humidifier. Temp 24/25 humidity 50 and VPD around 1 to 1.2. Not much to say for this week. Onwards and upwards as they say.

Day 61 / Flowering 28 It's blooming 😀 I can't wait to see them go up in smoke 😋 My oscillating fan stopped working this week😵 I replaced it with 2 normal fans --------------------------------------------- 💧Watering On average I water each pot with: Day 59 : 1 Liter Day 63 : 1 Liter with 0.3 Gram of BoosterPK+ I alternate watering, one with booster in my water and the next without. I add Bioenhancer once every 14 days +/-. I add very few nutrients to my water because I have already placed Bio Nutrients directly in my soil 😉 (BioGrow & BioBloom added on week 1 & 5) ------------------------------------------------------------ 🔥❄️Temperature of the week : Day : 21-24°C (Humidity : 55-70%) Night : 16-19°C ------------------------------------------------------------ 🚀Equipment of the week ⭐️ : Lamp Led 300W : power 95% at 35cm Extractor+ carbon filter ON 24/24h 2 fans ON 12/24h ------------------------------------------------------------ 📜Links : Tarte Tatin seeds 🌱: https://shop.greenhouseseeds.nl/feminised-cannabis-seeds/tarte-tatin/ Food for your plants 🔥🔥👍 https://www.greenhousefeeding.com/ 👨‍🚀My Instagram 🌱❤️️: https://www.instagram.com/hou_stone420/ ------------------------------------------------------------ ☮️Thanks for your visit💚☮️

SUNSET SHERBET 9/13-21 The transition to my new grow has been chaos. After reading the events of the last week you too will shake your head in disbelief, but honestly friends you can’t make this stuff up. After germination on 8/30 Sunset was transplanted to her final 3 gallon pot on 9/3 because her early true leaves were brown on the ends which I attribute to the ph of the seed medium. I also cleaned and disinfected the AC Infinity 4X4 for this new grow. The Frosted Guava that germinated on the same day did not make the transition. I started her replacement seed on 9/8 followed by germination on 9/12. The babies are starting in the 3x3. Meanwhile, new fans arrived from AC infinity to replace the fans that weren’t working correctly. One fan made clicks when it rotated and the other did not rotate at all. These new models needed a different splitter than what I was using. Ordered that, now wait for the splitter. A splitter from Amazon arrived quickly and I moved the new gals into the 4x4 tent. Since I’m using controller 69, I set the program to seedlings which has high VPD. The following morning, moisture vapor was seeping out of the tent through the zipper as well as the controller port. It was basically raining in the tent with about 1.5 gallons of was on the floor. Clean up on aisle 2. While I was mopping the tent, the lights were flickering on and off. I just knew the electronics were fried. I reported the situation to AC Infinity. Working through each step determined that the lights were not impaired by the moisture. With each step, areas that could have been the issue were eliminated. Aha..The vent motor was burned out. They are sending a replacement. (note: AC Infinity is very responsive and at no charge to me, replaces malfunctioning equipment). My babies are back in the 3x3 until the new vent arrives. But wait! There’s more! While all the issues with the 4x4 were going on Sunset Sherbet and Frosted Guava were in the 3X3. 9/13 The day after Frosted Guava germinated soil, I opened the tent only to find hundreds of bugs on the floor clustered in corners and in puddles (drippings from wet towel). I took the pots outside and flushed them with about 3 gallons of well water. Sprayed the tent with diluted vinegar water, wiped up the bugs then wiped the floors, and walls with alcohol and put the gals back in the 3x3 tent. It’s not over yet. 9/17 open the tent with more bugs on the floor. That did it. Another transplant for both gals into brand new Happy Frog soil without any amendments. I put the gals on crates and put a humidifier in the tent until I move them to the 4x4. Autoflower plants do not like transplanting so I hope they have not suffered. To help alleviate stress, I provided a light feed with Plant juice. 2 TBSP /gal plant Juice Ph to 6.62 PPM 470 Water temp 70 Pics taken 9/18, 9/20 & 9/21 Sunset Sherbet 200ml with extra poured around the rim of pot Frosted Guava 50ml with extra poured around the rim of pot It can only get better from here. Thank you friends for the visits, likes and comments, I appreciate you💚. Sending love, light, and healing 💫 💫Natrona 💫

The growth is very good. Plant 3 has the fewest buds, is the smallest, and seems slightly more indica than the others. Plant 4 has very striking colors. 12/12 from seed Watering with filtered tap water every 2/3 days, when the pot is lighter, 500-1000ml Soil: peat, coconut powder, perlite, carbonized rice husk, sheep manure and worm humus. essential mineral mix, vegetable flours, vegetable cakes, biochar, bokashi EM1 and other organic inputs, Algae ascophyllum nodosum small pots 3,7liters // 1gallon light: lm301h-evo 120watts with other plants

Its very frosty and I would say overall very good if you are looking for hash. I personally do not get much flavors out of it. I harvested 3 plants, flushed them properly, and dried them properly. All of that said, the flavor just wasnt there for me. I get a coffee aroma from its buds but definitely lacks flavor. I do not get any sweet notes from it like I should. This strain is strawbanana cream x do-si-do so I was hoping for a bit more flavor. I do not weigh wet, so final dry weight after a tight trim was a little over 6 ounces.

Diy Growbox: 60*60*160 cm Light: 150w led Light Cycle: 12/12 Soil: CocoPerlite in diy Hydrobucked Extractor: 120mm PC vent Running 24/7 Bloom has begon, together with the Sweet Zombie in a small space. My bro and I are really happy with the results till now with our diy project

Well this lady is starting to look finish 😁 I've bumped down nutes and are still keeping ph at 6.0+-0.2. She had started to crumble under her own weight so I've had to tie her up a bit. Next week I'll flush her and then it's harvest time 👍 A little note the 20/7, i saw today that i got a single little mushroom growing out of the side of my airpot. I've seen a lot of funny things, but never actually mushrooms 😂 didn't know they could thrive in coco at all?

Starting to pick up a bit of bulk now. I'm reluctant to remove some of the fan leaves, because I maimed my first grow lol. So I'm using soft plant wire to hold the fan leaves aside. Allow as much light through to the new nodes

Light settings 12/12 on at 9.00am off 9.00pm Light power= 62% 150w Radiator settings LIghts on Turn on if temp drops below 23c Turn off if temp goes above 23c Lights off Turn on if temp drops below 19c Turn off if temp goes above 19c Dehumidifier settings LIghts on Turn off if humidity drops below 60% Turn on if humidity goes above 60% LIghts off Turn off if humidity drops below 62% Turn on if humidity goes above 62% Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 9 Min speed 4 VPD aim 0.8-1.2 Wednesday 1/3/23 Day 36 Autofeed 5 15 minute runs Water 10L Ec=0.21 Ph=6.5/7.0 3L left Roughly 2.3L each. #1 no runoff 7.15pm Lowered light 3cm #1 DLI= 26.8 Thursday 2/3/23 Day 37 10.00pm Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 10 Min speed 5 Friday 3/3/23 Day 38 Autofeed 5 15 minute runs Feed 10L Ec=1.73 Ph=6.3 2.5L left. Roughly 2.5L each. #1 no run Saturday 4/3/23 Day 39 5.00pm #1 Height= 28CM Dist= 40CM DLI= 25.3 Lifted lights 3 clicks and Lst and defoliate Sunday 5/3/23 Day 40 Bit of Lst and scrogging Monday 6/3/23 Day 41 Autofeed 5 15 minute runs Feed 12L Ec=1.78 Ph=6.3/6.3 4.5L left Roughly 2.5L each. #1 no run #1 DLI=25.8 Lifted light #1 Height=29CM Dist=46CM DLI=21.0 Tuesday 7/3/23 Day 42 (Day 14 flower) Radiator didn't come on when it should have. It was cold today and I don't understand why the sensor didn't trigger the Radiator. #1 Height=29CM Dist=46CM DLI=21.0 The 2nd week of flower has gone well. I have tried to keep the canopy of the overall grow as level as I can, the only problem with running different strains is they all have different traits and grow at different speeds. Nearer the end of the week the weather started getting cold again so the radiator is going to be working a bit more over the next week or 2. #1 Wedding Cheesecake FF still hasn't started stretching so I'm thinking she is going to be a short and bushy. She is looking really healthy and I think she is spread out enough not to cause any problems with airflow. Power used for week Light (1.77+1.84+1.84+1.84+1.84+1.83+1.84)=12.8Kw Extractor (0.19+0.24+0.25+0.27+0.31+0.31+0.41)=1.98Kw Fans (0.48+0.47+0.47+0.47+0.47+0.48+0.48)=3.32Kw Dehumidifier (0.69+0.65+0.0+0.01+0.6+0.02+0.69)=2.66Kw Radiator (3.3+3.98+3.38+3.16+3.8+3.31+4.07)=25.0Kw Water pump. (0.02+0.0+0.02+0.0+0.0+0.2+0.0)=0.24Kw Total for the week=46Kw Back in a week. Thanks for stopping by.

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Hey guys :-) . Week after week goes by and the lady is developing great :-). The training has ended because she will be in the flower tent in the next 10 days :-). It has become very bushy and I am very curious to see how it will develop again in bloom. It was poured twice this week with 1.2 l each. (See table above for nutrient addition). It was cleaned and the plant health checked. Stay healthy 🙏🏻 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Nutrients : Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8

Welcome back to yet another update on my summer grow 😎🤙🏻 Things are still going smooth, a bit defoliation and nematodes was used and hopefully they will do their job in a few days😁 Started to add bloom to the mix, so let’s see how things turn out. As you can see the red spectrum is really working well, and soon I´ll add some small amounts of IR/UV daily. Looking forward to see the result 😊 _____________________________________________________________________________________________ SpectrumX LED🔥 @medicgrow 880 Watt⚡️ 2x UV/IR LED panels 💥 2.7 μmol/J🔥 Full Spectrum V1,F1,VS,FS🌈 Display with PPFD & Live spectrum Light measurement: Apogee MQ-610 & Apogee DLI-600. Fertiliser: Organics Nutrients https://www.organicsnutrients.com/en/ Green Buzz Nutrients Discount Code: GD42025 Grants 25% with a minimum Order value at 75 Euro. https://greenbuzzliquids.com/en/shop/

Time to start feeding her! She is doing ok but a little smaller compared to other diaries. I figure its because the heat. I’m hoping this is the week she starts to run. Wish me luck!!

New week in supported marshydro grow FLOWERING TIME last run i did it under a TS-1000 But this time it will be under the amazing FC-4800 i am so excited to boost up everything and see what i can approve from last run 🤘🏻🤘🏻 Starting to put them in 12/12 schedule they have bin put in darkness for 12 hours and now hopefully let the flowering Begin fucking love this stage 🤘🏻😎🤘🏻 27/10/21 All plants Transplanted in 11L fabric pots added 5gram Easy Roots - Mycorrhiza Mix to soil Have some ideas for my grow tent I have my plants on hard plastic pallet And i ordered plateau with ball bearing So i can turn my plants around with one spin 😎 basically a huge turntable wikiwki Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Finished week 9 and cut them down... It was a forest.

satisfied with the harvest, fantastic tasty flowers and with a very strong smell!

No nutrient deffiencies 💪 they growing healthy AF! Everyday LST is my job 😂 I will try to make about 6-8 main colas with this method! Also little defoliation, just to make the light more effective👌 things getting more and more interesting lets go wow!!😈 100%ORGANIC no chemical nutrients!!!

flowers are super dense, the branches can no longer support them i think they will be harvested in the next few days