Day 113. Third wave of heavy flush, girls get from 30 to 50 liters in time-lapse of one hour. Planing to chop them after 10 days, two more heavy flushes ... Control Garden is a beauty ... They are a bit behind, but hopefully next week i will start to flush them aswell. Incredible Bulk standing in front of fan is most matured aka damaged ;))) Not many seeds i see, so i calmed down a bit, still free cheese is only in trap, fact ... Day 115. Girls fade nicely, today got 4th wave of flush, best case scenario in 8 days chop, worst - in 4. Busy work week, so it will be hard to find time, wet triming takes to much from me, i do it too carefully ... Happy Growing !

OK. Now it's getting tough. I actually did not think it was going toever be real ' work '.... but good gravy... this is hard on my new titanium knee!

And another week beyond the hesi nutrition is just good. Still works now. But we rinse the potting soil for a few weeksAnd another week beyond the hesi nutrition is just good. Still works now. But we rinse the potting soil for a few weeks. 😁

Things are looking great, I've put them under the LED this week so they can get used to it... and to get a better video quality :D I'm mostly hand watering at the moment one time a day.

Bin sehr glücklich über das Resultat. Die Sorte ist mir richtig gut gelungen, nicht nur vom ertrag auch die Kompaktheit der Buds. Ich glaube mein nächstes Projekt wird Runtz Muffin sein. :))

Smells and tastes straight like a banana smoothie

Well 4/5 weeks in flower and she is still going strong! She was left for 4 days and still kept stretching! She’s finally swelling and the end is coming. I used this grow to show just how much abuse these plants can take! Under the right conditions these will produce big yields of sticky flowers!

Once the plants made it out of the seedling stage, they finally managed to take off. Zkittlez Glue is leading the charge.

Week 5, its march 8 and still growing in the cold 😃 lets go guys

I added a second light yesterday. I’m not sure if it’s overkill and if it’ll work well with the other one. They are both VIVOSUN 300w LEDs, the one I already had has a veg and bloom switch, but the new one doesn’t. But hey it was cheap on Black Friday for $63. But having the new one in there quickly increased the heat in there from 75 to 85. I’m waiting for an oscillating fan to throw in there also which will help. Any advice on the light situation? More light spectrum the better? Update: did my first LsT on all three girls on 12/1. Within 3 hours all the leaves were facing the lights again I was impressed

day 55: 2 of the plants are finally turning purple! I always have to remove some leaves for the lights to reach the lower buds, other than that I just feed and love them. :-) day 57: those 2 plants are getting more purple every day now! Unfortunately the camera cannot let u see what I see, but the colors are bright pink and almost pearlescent like. I will try and make more pics in natural light, but it's really tricky to get them out of the tent as they're pretty big now ..:P

These lady's have formed very nice buds even have a few show purple 😍 this strain has been very good can't wait to see war other color pop off right it's the start of 6th week flower

MARSHYDRO LED DOING AN AWESOME JOB! DON'T MISS THE VIDEO!! SHORT!! THANKS 😎 GOPRO HERO SESSION WITH WGS FEIYU GIMBAL STABILIZER

What’s good everyone, this is the start of week 11 and the first week of flower. Yesterday I let the, sit in darkness for a whole day to jump start them and by the sight of it, they sure did jump a bit. MXOP is amazing she takes to what every you toss at her, she is hard to stress out. But after growing this cultivar a few times now I can say they don’t require much nitrogen as one would think they CRAVE calcium and possibly a bit of magnesium but from what I have seen they ALWAYS want more calcium weird might be the soil I have been using. This is the fun part, can’t wait to update you all next week FLOWER TIME BABY WOOOOOOO! Until next time growmies take it easy ✌️ 08/07/23

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Day 100 - All ladies looking good at this point in the grow. Noemi's pistil hairs have mostly all curled up and turned amber in color. Also her trichomes are starting to appear amber in color. Will flush her pot with about 5 gallons of pH'd water soon. Natalia's pistils are about half curled up/amber and half white. Her buds still appear to be packing on trichomes and weight.

My house is full of sweet chocolate and fruit aroma:) her flowers are full of shiny trichomes :) the girl only bloomed for 57 days, but she is already ready, maybe her flowering sped up in my grow box, high temperature 33°, because of that under my arm my light was set to 85%. From the first days, the girl showed fast and healthy growth:) I made a timelapse video, but unfortunately due to problems with the SD memory card, it takes 3-4 days at the end of the video, besides, my tent is too small for that :D I also made bubble hash from sugar leaves myself :) I tried Zamnesia seeds for the first time - I hope that someday this seed bank will offer me its products to try again :) thank you all. you were together :) good luck with the growing.

The plants react well to pk 13/14 !! We are in the seventh week and the flowers begin to grow !! The plants have very long sonnets and have on average 10 12 plantations!