. 🌱 : 💧 : 1l day 7, 1l day 9, 2l day 12 💡 : Dli: 25 mol/m²/d 🤔 :

The smell is ABSOLUTELY divine 🤩 The trim was super easy,the buds are super dense & sticky👌

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

My second growroom is built and the girls have moved in. Medical Mass is a new medical cannabis strain with a high CBD content and a low THC level that provides good medical properties without a strong psychoactive effect. This is a mostly indica plant that contains 40% sativa and 60% indica. Critical Mass and CBD rich strain were crossed to create this amazing valuable variety. The plant suits both for indoors and outdoors, for beginner and experienced growers. The strain grows up to 60 - 100 cm tall and produces good yields for such height of about 500 - 550 gr/m2. The plant demonstrates great results even in small spaces. The flowering time takes only 7-8 weeks and the harvest comes in late September. The smoke brings very strong, intense flavors with sweet notes of honey and skunk and an intense pleasant relaxation. Medical Mass is the great choice for each medical user due its small height, ease of growing, fast flowering and of course great medical potency. ---------------------------------------------------------------------------------------------------------------------------- 2017-12-25. Week 16, day 3. The girls starts to look better now and the buds are growing. Had to support the branches and did a defoliation and rearrange some of the buds so they get more lights. Added pics and video.

She's definitely taking longer than expected, but i don't mind since the buds seem to still fatten up didn't have time to water again this week so she's a little dried up, I removed some fan leaves that were completely dry and brittle there's some beautiful purple coming through should be ready anytime soon now

Weeks 6 & 7 💚 Lack of photos were taken so I have decided to consolidate these two weeks together, The 8th - 15th as well the following week of 16th - 23rd of March

She is growing strong and healthy

Lots of bud sites with nice buds forming , some trichomes are now on the plant , it's eating the feed really fast and looking healthy

i accidently bought some unbuffered coco and mixed it with my ussual earth, had major calmag problems in mid-flower but i´m still pleased with the results...also had a little trouble with mold at the end due to bad weather and high humidity in the final weeks of the grow, had to remove a few buds and harvest early @ day 55 of flower....but there's still alot of great looking buds left for me to enjoy and all look mostly done... Just harvested and hung them upside down, currently drying them at constant 19.5-20.5°C and 50-60% RH..will update as soon as they are dry

Lets go

Ok so finally decided to move the girls into the flower tent so switched to 12/12 also flowering under a 315watt cdm 3k bulb the new cdm light is doing wonders for the girls

Weeks been going well cruising a long steady growth!! Making sure I keep that fresh air in the tent, starting to really smell that dankness! Headed into week 5 of flower. By week 6 I’ll know if I need to start flushing my plants or wait another week. Looking to harvest around week 10 of flower. We shall see! Love this journey the plant in the front left in the video is a bit behind the others but she’s doing well. Been trying to figure out what Dan leaves I can trim without shocking the plant. But all is well! 🔥

Tuve plagas de Araña roja y de Mosca blanca, he fumigado 2 veces y parece que esta solucionado. Los cortes Apical y FIM van creciendo correctamente.

Flushing startet

Esta semana creció muy bien, la maceta que había buscado de forma provisoria anduvo muy bien ya la próxima semana voy a buscar la maceta definitiva para floración y arrancaré con un poco más de luz para poder dar un poco más de flores con un poco más de resina muy buena la cepa fuel og de Ripper seed, la verdad que supera mis expectativas día a día muy buen crecimiento muy buen olor excelente resistencia al estrés y buena tolerancia los calores y a las cambio de temperatura.

This was the boss lady’s first grow. This was under a spiderfarmer sf1000 which did a amazing job. I’m really surprised with the light in a 2x2. It did wonderfully. Now to the bubblegum. Once again fastbuds delivers for us with a plant that does exactly as they said it would. She didn’t top the plant or do any HST just from a time standpoint for the originals contest. This one could have actually went a little longer, however we have cloudy and amber trichomes already, and we flushed the last week. So with the contest ending today, might as well let her come down. This was a great plant for a beginner like they said it was. Even without me standing on her shoulder, she could have grown this one. The density of these buds is down right surprising. Super dense and super sticky. She smells exactly like big league bubblegum chew. We can’t wait until this dries and cures. I’m sure it will be amazing. I’ll update this diaries as soon as it’s dry with the final weight. Thanks for looking!