Likes
Comments
Share
@Jimmy89
Follow
The the buds were small so it made trimming a nightmare! But it’s done and the end product is worth all the time. I have loads of trim and small popcorn buds that will be dry Ice sifted and pressed into a hash brick. Will update the diary when I have some bcp hash Weighed up the trim at 588 grams, used my trim bins with dry ice to sift the trim and pressed it into blocks using a rosin pre press, I’ll now jar this and put it to one side. My first time doing this, definitely worth the effort!
Likes
5
Share
So die 11 Woche hat angefangen, seit ca 5 Tagen gibt es kein DĂŒnger mehr fĂŒr die Lady. TĂ€glich gieße ich mit 1.5 Liter und das Wasser hat einen PH Wert von 6.5. Noch eine Woche und dann steht die Erste Ernte an. Bin echt gespannt wieviel Trockene Buds auf der Wage sind.
Likes
55
Share
@Max1973
Follow
Day 37 - Everything looks good.... they are drinking so much.... i built a bit more stable light setup, and i'll need to buy afew more plugs and stuff, to fill it out ...... i organised all the 2700k globes, ready to swap in..... still waiting on the exhaust fan, so i'll keep em in "grow" mode another week or 2 .... i'm vaping a leaf or 2, and drinking "green tea hot chocolates" .... it is so delicious in hot chocolate .... my health has picked up since starting the vape/drinks... the 21 thc/19 cbd is supa healthy ... Day 38 - Getting them ready for Flower, noticed they are lacking in nutrients, so i started em on the heavier dutch master gold flower nutrients. Day 40 - Added some pics. (they look droopy because they in night mode, just turned on lights for pic) - Started them on 12/12 flower, still working on getting all the lights, gear, and globes, for the right spectrum and amount of light.... atm got - 7x 2700k (click) , 2x 6400k (osram), + 60w light panel .... i'll go get some more gear today and hope to expand it to 10x 2700k , 2x 6400k ...... I put the exhaust filter fan on seperate power, so it doesn't go on/off with the timer, but stays on all the time.... it totally fixed up any odour problems, haha ....... Added some different pics for my light spectrum ... etc..... the outside winter temp is now at 40-60oF (5-15oC) so with the 12/12h, the temp inside the tent is dropping to 60-80oF (18-22oC), abit low, but flowering is supposed to be in winter, so idk, see how it goes..... I'm new to growing, so idk how this will work out....... just working it as i go.... i noticed afew spots on a leaf, so i upped the neuts abit more, they are still drinking like fish, huge amounts.... Day 40 late - new vids - Got the extra gear and installed it all... redesigned the initial setup, refined it with proper measurements, had to get my steel rule out, lol....... got the 12 leds in and running, 10x 2700k clicks, and 2x 6400k osrams, with the panel..... it's lookin beautiful and got the exhaust on 24 hrs now, all working perfect with 12/12 timer.... they are forming a few spots on leaves, so hammering the nute water into them now... they are drinkin 1-2 litre of nute water a day each.... (nute water = Dutch mater gold one grow/flower, 800-1000 ppm 6 PH) 😎 Some details about lights.... i did some maths on it, and included some handy pics..... because i'm using cheap leds, i'm keeping the distance at 25cm, they are leds so they won't burn, and it massively increases the lumens/lux/Par, and with my home built light setup, the leds are spread out enough to keep it lower.... worked out good..... something of note is that all the led globes are built/made in china... however different marketing/selling companies from around the world... and the german osrams are 1w leds ... by far the most superior, but anyone can design and send the requirements to china to build em, haha) it's not a contest, we all work together.... haha.... the person with the best led light globes gets my business, because i want the best for my babies.... :) (let me explain- 1w led vs 0.5 w led, the watt of the led projects the light, lumens, LX/PAR etc much further the higher the watt of the led....my 600w panel has 0.5w leds, the philips has 0.75, the osrams have 1w leds..... ) each globe philips (dutch)- 10.5w internal - 14 leds 0.75w 1055 lumens each globe osram (german)- 10.5w internal - 10 leds 1w 1080 lumens each globe click (cheap)- 9w internal - 16 leds 0.56w 800 lumens light panel - 70w - 600w 30 red - 8 red 12 blue - 8 white 7500k 1 ir - 1 uv = 20x blue 6400k - 38x red 2700k internal - 60 double leds - 120x0.5w 6000 lm
Likes
2
Share
Flowers looking crazy colourful and the smell is even crazier 😼‍💹
Likes
10
Share
Remo nutes used on my sweet deep grapefruit, only just started grow diary but remo nutes have been doing lovely since I started using them in week 2
Likes
1
Share
@Genji
Follow
Bloom week 8. Ec 0.4 (only water). Ph 5.8. Trichomes looks nice.
Likes
14
Share
10/28 - First week in the books. I figured now would be as good a time as any to use a sprouted seed tea because the plants seem to be starting to fully stretch. Pistils are coming slowly but surely. Canopy isn't full but it's still the best I've ever done and I'll take that knowledge into future grows. Exciting weeks ahead. Crazy to think in two weeks it will look more like the finished product than the plants you see before you. I'll take them out for a photo shoot this weekend. The amount times I will be taking them out of the tent will be limited from here-on-out. These plants are getting cumbersome.
Likes
8
Share
After 48 hours of darkness, the time had come and the Purple Lemonade were ready for harvest. Since she reacted very well to the training and grew with enough space between the buds, I decided to dry upside down. Dry weight and smoke report follow after curing. Stay tuned...
Likes
4
Share
Likes
1
Share
Sorry to all community if have not been updating for the last weeks. Day 56 of flowering, same strain exactly same set up two totally differents plant at the end. A little problem with a K over at the end that affected the right one. Beautifull big buds in both with nice tricohoms everywhere. Another week maximum before the cut. â€ïžđŸŒŒđŸŒŒđŸŒŒđŸŒŒ
Likes
4
Share
@Bretwalda
Follow
Underfed these girls a bit and they had a late defoliation but they seem to have done okay
Likes
4
Share
@Coopmc
Follow
Ya buddie got a cut of this to throw in with FruitWalker 50/50 I’ll be reversexig for pollen! Hell yes😍😍😍
Likes
20
Share
# La germination c'est bien passĂ© la graine Ă©tait foncĂ©e et tigrĂ©e. Elle a sortit son germe dans le verre d'eau et c'est enracinĂ© en +/-96h avec un petit peu d'aide. 💯 Jusqu'Ă  prĂ©sent Zamnezia seeds đŸŒ±đŸŒ±đŸŒ± # 08/14: zamnezia ma fait cadeau de 3x3 graines pour essayer leurs variĂ©tĂ©s. Donc un grand merci Ă  zamnezia ! Je n'ai mit que une graine de GSC auto zamnezia seed Ă  germer aujourd'hui pour ce qui est de la mĂ©thode de culture j'hĂ©site encore car je viens d'acquĂ©rir un waterfarmer de chez GHE: un systĂšme par percolation. Enfin j'ai +/- 5 jours pour me dĂ©cider ! D'ailleurs si quelqu'un a des conseils Ă  mes donner quand Ă  l'utilisation d'un systĂšme hydroponique par percolation, je suis preneur ! Great day at the growdiaries.com communautĂ© đŸŒžđŸŒ±đŸŒ±đŸŒ±đŸŒž À peine Ă  7 heures aprĂšs l'avoir mise dans le verre d'eau que la voilĂ  dĂ©jĂ  au fond du verre d'eau. đŸ’ŠđŸŒžđŸŒ±đŸ˜œ 08/15: depuis 24h dans le verre d'eau Hr: 70% T°: 23°C et toujours rien aucun germe, l'effet loupe du vere ma permit de voir que la graine s'ouvrait comme un moule, le germe devrait pas tarder Ă  sortir. normalement d'ici 24h le germe devrait ĂȘtre apparent. normalement je met +/- 5 jours pour faire germer une graine! j'hĂ©site encore quand Ă  l'utilisation du waterfarmer car je doit tamponĂ© les billes d'argiles aisi que que le rockwool chose que je n'avais pas anticipĂ©, pour le rockwool ça semble plutĂŽt simple: trempĂ© 24 h dans une solution ayant un ph entre 5.5 et 6 pendant +/-48 heureus (merde j'ai oubliĂ© d'ajouter du root juice et du canna start Ă  ma solution). Pour les billes d'argilles ça deviend plus compliquĂ© faut les nettoyer et les tamponer meme celle de chez plagron (je suis trĂšs Ă©toner qu'ils n'aient pas tamponĂ©s eux mĂȘme leurs billes destinĂ©s Ă  de l'hydroponique. en faisant deux trois recherche j'ai trouver des billes dĂ©jĂ  nĂ©toyer ayant un ph bas mais pas prĂ©cisĂ© sois disant prĂšs Ă  l'emplois. on verra ça demain Ă  l'arrivĂ© du colis. dans tous les cas si je n'utilise pas le waterfarmer, j'utilserai un pot en geo-textile de 15L (lightmix/coco/perlite/humusLombric/guano/trichodermas) 3 portions de lightmix pour une de coco et d'humus, le reste lire la notice :D 23:03: je vois le radicule sortir fĂ©brilement grĂące au verre "nutela" 😂 qui ont un fond qui Ă  un effet loupe , le waterfarmer sera pour le prochain plant :(, lesson a retenir, se documenter avant de faire quoique soit! 08/16: la graine Ă  germer 💚 et la graine s'entre-ouvrait je voyais le vert/blanc des cotelydons dans l'ouverture. Je l'ai directement planter dans sont pot de 15L. 08/17: no news. Patience les amis đŸ’‚â€â™‚ïžđŸ’‚â€â™‚ïžđŸŒž 08/19: la voilĂ  qui arrive fĂ©brilement ✌. D'ici ce soir elle devrait ĂȘtre droite ou presque :)#1
Likes
14
Share
@BatGuano
Follow
D88 - She stretched a lot and I did not intervene with her stretching that much. She doesn't even need any LST since the beginning of flowering. I am just defoliating her a little bit by taking out the leaves blocking the direct light and that's it. Pollination - Previously I harvested some male pollen from a female plant by spraying colloidal silver. This plant itself was a breed of White Rhino X AK47 (White47 I call it). Now I pollinate White 47 with AK47 again at the third week and it will have time to mature her seeds I hope. I marked the branches and turned off-the fan nearly for a day to prevent over-pollination. I took a video in case you want to create your own seeds!
Likes
32
Share
Blow Mind Blows My Mind!!!😎 👉Harvest day came! The plant trichomes were mostly cloudy, still a few clears and very little amber on the calyx’s. If this was the only indicator for this plant I would have kept going until I saw a few less clears. However the plant did not have many fresh calix’ and most of the leaves were fully faded and drying out (referring to the major cola branches). Since it’s a Sativa dominant strain, I wanted the uppy high and so there was no need to risk pushing any further. 👉To do the harvest, I started at the bottom of the plant. I trimmed the secondary branches off and most of those landed on the ‘larf’ net, and the major colas got wet weighed and placed on a clothes pin with a letter on it. I logged each bud with its wet weight. Each clothes pinned cola was hung on a drying rack. Some of the lower coals had some decent secondary buds and those were given numbers so they could be jarred with its main cola later. I was not able to access the plant and trim as much of the secondary branches from the main branches. The lower branches have lots of secondary branches and lots of under developed flower. I will categorize it as larf because it is under developed, even if each secondary branch would be the same size and quality as many of the so-called ‘contest winners’ on this site. But I digress
The bud structure wasn’t ‘perfect’, oversized calyx’s, longer and slender, with a bit of fox tailing. But oh wow is it frosty! This is the stickiest of any that I have grown so far. My first Gorilla glue lived up to its name as a scissor clogger
this plant is twice as sticky! The sticky is all over the plant and extends well out onto the sugar leaves and the stems. The lower areas of the plant also had more leaves on it, so it became a frustrating exercise of leaves being trimmed and sticking to my fingers as I plucked them, then switching to the scissors to snip the leaves, which quickly became sticky and required lots of scraping to keep working. I started using two different pairs of scissors, one for leaves and one for the buds. I did get a nice, almost marble sized scissor hash ball. 👉The buds had lots of sugar leaves; these were all frosty as fuck. So I only trimmed off the leaves that stuck out. I didn’t trim them close. The structure of this bud, a looser trim is seemed to be what it should get. I had 18 main colas, and 8 buds from a couple of the lower main colas. There was one and a half net racks with decent sized secondary buds, and two net racks full of ‘larf’. I didn’t weigh the larf after a few bunches. After all the buds were trimmed, cataloged and hug on the rack, and aimed a 42” tower fan set about 36” away and turned to a medium speed. Two smaller fans pointed at the round net rack. The grow tent exhaust was cranked to high because the sweet funky stank was pissing my wife off
so I knew it was going to be something special! Outside, even with moderate breezes you could smell it outside around the house. After 12 hours I rotated the buds side that faced the fans, after 8 more hours I turned the fan down to its lowest speed. I again rotated the buds and weighed a couple to see the reduction in weight so far. The buds on the net rack were turned every 8 hrs. During this time the outdoor temps were in the 40s and sunny. My HVAC was set to 65f and didn’t run much. After the buds started feeling a little dry on the outside I placed them inside paper lunch sacks and left the tops open. I monitored the buds closely till they felt like they were getting a little drier. At that time I closed the top of the bags. When I did that step I weighed a couple buds and we were at about 38%. Another couple of days like this and I weighed again, we were at about 25-30% weight remaining. Normally I shoot for 20-25%, however the buds felt very dry so I proceeded with the cataloging the weight as I placed into jars. I placed hygrometers in each jar and expected to be leaving the jars open regularly to keep the humidity down. Surprisingly most of the hygrometers were registering below 60% humidity with only a few of the jars needing any airing out. My target humidity is 62%, but since they have all been slightly lower I have held off on putting the humidity packs in. The buds are still a little moist around the middle and Im sure the extreme frosty stickiness is contributing to holding in some moisture. This isn’t a bad thing and I have the humidity low enough that I shouldn’t get any mildew. I put the 62% humidity packs into the jars as I felt that each jar needed it. The final weights do not include the 'larf'. The total of the underdeveloped 'larfy' buds was 142g and would make great hash. I wont be making hash however because I the kief hash is already more that I will consume. 👉I took a small larf branch two weeks early. . I just let it dry out with no care for about 5 days then put into a small jar. It’s really the best larf I’ve toked yet. Very sticky, sweet funk aroma, and a nice strong buzz. I sampled some of the main buds after being in the jars a few days and it was significantly stronger! Taking a tiny bit of the scissor hash at two weeks was exponentially stronger! At 6 weeks the flavor is wonderful. Smooth and sweet. The taste at exhale make me smile.
Processing
Likes
15
Share
@Messypies
Follow
Lovely growth on the buds this week. Struggling to smell at the moment due to my filter but once out of the tent it is smelling beautiful
Likes
4
Share
@Fatbudz
Follow
week 11 75 days according to the breeder this strain has 7-8 weeks of flowering. with the possible stress that the plant has suffered maybe it has slowed down its growth a little. but since I'm not impatient and I have time is not a problem. I like to let it mature on point so I let it roll for another three weeks. As for the sample I took a week before... it was on a good track. I could already feel some notes and aroma but deep down. very heavy and harsh smoke, to remember that there was no flush or cure, just dry. Now its waiting for the whole plant dry. đŸ€žđŸ™
Likes
30
Share
Sixth week of flowering. It was only a matter of time before the first problem appeared. The flowers are so heavy that they started to bend. I had to immediately stretch the support net. It's a lesson for next time.