Likes
Comments
Share
@Unkraut
Follow
another resin monster from seedstockers, with a very special scent, full of flavors! grinded it smelled like peppermint, and vaped it has a great sweet creamy taste!
Likes
12
Share
This was the girls last week of Veg. ❤️ I did a big defoliation, the lit in my 4x4 custom SCROG netting and started tucking and bending the tops down to fill the spaces. They were looking pretty scraggly for a day or two after the defoliation, but within a few days the screen was filling out. I have a daily routine of lights on, tuck and bend, no weaving and then just before lights out I’ll do the same. Temps were good, watering has been vigorous. They are very thirsty! Feeding about 1 1/2 gallons every feed now, the 4 gallon pots are a bit undersized but I wanted to see what could Come of These slightly taller pots, rather than the wider regular sized pots. Haven’t had to add humidity this week, pretty consistent around 60%. At the end of the week I changed the light cycle to a 12/12 for flowering ❤️👊🇨🇦
Likes
12
Share
@Drtomb
Follow
This is a grow of a plant i grew many grows ago. Looking forward to re-experiencing the plant again. Ive always found barney's farm to have exceptional genetics. Recommend them as a breeder. Stay tuned
Likes
110
Share
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!guckt euch letzen Report an !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Blüte hat begonnen: Edit:11.05 Die Pflanzen sind innerhalb von 2 Tagen explodiert. Ich habe das Licht nun auf 75 Prozent gestellt und noch einmal Cal-Mag nachgegeben, da die letzte Gabe nur eine halbe war. Die beiden Titan sehen fast identisch aus. Die beiden Epsilon sind circa 3 Tage unterschiedlich, eine ist etwa 5 cm kleiner als die andere und hat noch kaum Blüten. Ich denke, in 3 Tagen wird das der Fall sein. Die Cosmos F1 ist im Umfang circa 50-50 cm, kaum Blüten bisher. Ich hoffe, sie wird nicht noch viel größer, da der Platz langsam eng wird. Ich bin von dem Wachstum dieser Pflanze absolut begeistert. Mal gucken, was die Blüte bringt. Edit ende Ich habe alle Blüten entfernt, die nicht im direkten Licht sind, und alle Blätter, die die Blüten bedecken. Die Pflanzen weisen einen Cal-Mag-Mangel auf, was bei der Blüte normal ist, gerade bei diesem Licht. Ich habe dem Gießwasser etwas Cal-Mag hinzugefügt. Die Pflanzen sind drei Tage älter als im letzten Report. letzte Woche : Die Pflanzen sind seit der Keimung auf diesen Fotos genau 30 Tage alt. Ich habe eine Pflanze ausgetauscht, da es sich um eine Epsilon F1 handelte, die vermutlich Mutationen aufwies. Sie hatte verkümmerte Blätter, die nicht wie die ihrer Artgenossen aussahen, und wuchs deutlich langsamer. Daher habe ich sie nach 2,5 Wochen ausgetauscht. Der kleine Mann(die ausgetauschte Pflanze) leidet natürlich jetzt ein bisschen unter Lichtstress, deswegen werde ich wohl nur eine sehr gestauchte Pflanze erhalten. Aber besser, als die Fläche leer zu lassen. So viel zu dem, was nicht funktioniert hat: Die Sanlight stand die ersten 2 Wochen auf 20 Prozent. Dann habe ich sie teilweise mit dem Dimmer höher gestellt: 2 Stunden auf 25 Prozent. Eine Woche später bin ich auf 30 Prozent und 2 Stunden mit 35 Prozent gegangen. Für Woche 4 habe ich 40 Prozent und 2 Stunden auf 45 Prozent gewählt. Ich erhoffe mir, die Pflanzen so schneller an die starken Lampen zu gewöhnen. Im Nächsten grow soll bei jeder Pflanze die TDS per Infrarot gemessen werden. Da werde ich dann ein Experiment zu machen, wie die Lichtsteigerung am besten umzusetzen ist. Zu den Lampen kann ich bis jetzt nur Positives sagen. Im Gegensatz zur dazugehörigen App, diese ist wirklich nicht sehr gut umgesetzt. Das Menü und die Einstellungen sind teilweise irreführend und nicht sehr durchdacht. Ich muss mir immer wieder die Tutorials in der App ansehen, da diese immer wieder angezeigt werden. Noch dazu hätte ich gerne die Möglichkeit, mehr Einstellungen treffen zu können. Das ist aber Meckern auf hohem Niveau, weil auch die App das macht, was sie soll, nur eben meiner Meinung nach nicht sehr gut umgesetzt. Die Pflanzen wurden von mir mit Klipsen aus dem 3D-Drucker gestützt. Diese Klips kann man Stück für Stück im Winkel verstellen, so dass man die Triebe damit neigen kann. Das habe ich von Tag zu Tag im Winkel verstellt, so dass ich am Ende einen 45-Grad-Winkel habe. Das habe ich insgesamt über 6 Tage gemacht. Die Pflanzen haben an sich ein sehr gleichmäßiges Wachstum. Die Cosmos F1 wächst so optimal, dass kein LST mit den Klipsen nötig ist. Ich habe an den Pflanzen keine Mängel entdecken können und auch keine Anzeichen von Mutationen. Die Pflanzen haben im Durchschnitt eine Höhe von 35 cm, wobei eine etwas stärker abweicht mit 22 cm (wieder eine Epsilon F1). Der Umfang mit LST bei der Cosmos F1 liegt ohne LST bei 20 cm im Durchschnitt, wo wir wieder die Epsilon im Negativen haben mit 14 cm. Die Pflanzen wurden alle entlaubt, das eine Woche vor der Blüte. Morgen werden die Pflanzen erneut entlaubt und ge-lollipoppt. !!!!!!!!!!!!!!!zusätliche infos werden morgen ergänzt + Fotos !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! *1. Foto Mutation: Dieses Foto wurde nur 5 Minuten nach dem Umtopfen der Pflanze aufgenommen. Vorher stand sie in einem größeren Topf, in dem sie genauso aussah. Ich habe sie umgetopft, weil ich den Topf brauchte, aber die Pflanze nicht wegwerfen wollte. Der Pflanze geht es gut, aber sie sieht im Moment etwas mitgenommen aus. Bilder folgen
Likes
142
Share
Hey everyone :-). There is not much to tell this week :) A few came to the flowering tent, 2 are still in the vegi phase for 2 days and then come last to the flowering tent :-) The Blue Cheese and the Kosher Tangie Kush smell very good and how they should 😍👍 It will be difficult to choose 2 mums :-). I wish everyone a nice week 👌 Let it grow
Likes
10
Share
@Weedbadk
Follow
Día :1 iniciamos este seguimiento de estas variedades toda germinaron en 3 días Día 5 desde puesta en sustrato Solo pulverizó 1 no sobrevivió pero las 2 salieron sin problemas
Likes
25
Share
@Kazzy420
Follow
So Woche 6 hat angefangen und sie hört einfach nicht mehr auf zu wachsen 😅 Eigentlich bin ich ja ganz zufrieden aber der platzt nach oben hin wird solangsam richtig eng 🤔😅 In dem Fall alles richtig gemacht 🧐😂 Wenn mir jemand sagen kann was ich dagegen machen kann wäre mir eine große Hilfe Ps allen noch ein happy growing
Likes
1
Share
Do you think the plant is ready to be harvested ????
Likes
14
Share
Soaked seeds in plain water for less than 24 hours and all had taproots emerging. Went into Rapid Rooter Cubes in a humidity dome. Less than 48 hours from first placing seeds in water we got 100% germination rate 💪
Likes
11
Share
@420Paddy
Follow
Small update, starting week 4, 22 days. Tying down and training a lot. I've learned so much, I'm excited more for my next grow than this harvest. In the past week no major changes, Gelato finally start budding, it was last. Drinking around 7-10 litres a day now. Mainly just filling res and training/pruning here and there. Sooo bushy especially Gelato. Around the halfway mark after this week so hoping everything stays as is. Temperature here has dropped out side now about 5°C on avg, so leaving tent temps right down 16-17°C at coldest lights off point. Needed an hours heat to boost at lights on some days to push to 21°C after that the lights will bring to 24-27 and maintain. Humidity in the tent jumps but the air is a consistent 45-50% so not worried at this stage if seeing readings high. I'll be moving dehumidifier inside the tent towards the end. Video uploaded at end of pics.
Processing
Likes
8
Share
The plants are now growing slower in height and start to develop real flower clusters at all tops. Both Barbarian (=AK-47 x Barbara Bud) plants are bushy with lots of budding sites, but plant#2 is now 15 cm taller than plant #1, which is a little more bushy than #2. Both plants are healthy and still enjoy the normal recommended feeding schedule from Advanced Nutrients.
Likes
6
Share
This week the girls have been going nuts! These are the largest strawberry bananas I have grown yet! I'm super excited to see what happens after taking these photos I cut one leaf off each plant. My first second time running this strain I did LST and my yield was much lower and it stunted her. So she seems to like to stretch. Check back next week to see just how fast these ladies grow! & remember is 4:20 somewhere!!!!!!!!!!!
Likes
14
Share
@DTHEREID
Follow
Three at my place and they are purple as can be! Gonna finish up beautifully in the next weeks. If I didn’t put these girls down they would be standing at least 60” tall. Insane how big these autos are. These purple ones in my tent are entering week 4. The other three out of the same pack are at my dads under my hps set up. These girls are about 50” just early on in flower
Processing
Likes
16
Share
@3lementa1
Follow
I did a lot of low-stress training and I think I topped twice. The smaller plants had no training at all though. In retrospect, I should have re-potted them.
Processing
Likes
18
Share
A lot has happened in the last week. First thing is i harvested all the other plants in my garden. 2nd is i got a new light!!!! A green sunshine company electric sky 180. It is a 24.5 inch long led panel with 3 different sprectrum Samsung mid powered diodes (180 total pulling 1 watt each). Super clean light and it has linear lenses that house the leds so it focuses the light down rather than losing light to a wider spread. Since hanging it, this girl prays hard and the undergrowth is getting a lot more light now also. 3rd thing is i put 10 worms in the pot, hoping they will make castings and more available food as we transition this girl into flower. 4th thing is i am slowly transitioning the light schedule. Right now shes up to 9 hours of darkeness a night and soon she will get to her final 11on/13off light schedule. Last night I gave her a tea consisting of OregonismXL, grokashi and bloom yellow bottles "Seaweed." Looking amazing and still loving her no till pot.
Likes
5
Share
Going into 36 hour darkness before harvest..🍨
Likes
12
Share
@Lazuli
Follow
She blew up this week. This plant is huge Heavy defoliation see the last picture of this week..
Likes
14
Share
@danwho
Follow
Harvest day 11/3/23 - day 56 Sent about 2lbs of trim, larf, and sugar leaves to vacuum seal and the freezer for bubble hash later. Unsure of the weight of the buds hanging, but I can say it is more than I expected that is for sure! Excited to get a weight here in 5-6 days before trimming and jarring. I ended up having to cut the plant down in smaller pieces due to the trellis netting. Also due to the fact I planned to utilize the tent for drying, I needed to be able to completely remove the DWC setup and adjust the ventilation and net to use as hanging. 11/11 Final result picture: 1 jar of sugar trim - for RSO or bubble 1 jar of stems - for RSO or bubble L (lower quality bud jars) 0.75oz, 0.75oz, 0.65oz = total 2.15oz M (middle-quality bud jar) 0.9oz, 0.65oz = 1.55oz T (top quality bud jar) 0.75oz = 0.75oz TT (super top quality bud jar) 0.75oz, 0.45oz = 1.2oz total dried and curing in jars: 5.65 ounces about 2lbs of frozen plant material for bubble hash 1 full jar of sugar trim for bubble or rso 1 full jar of stems for bubble or rso 11/29 update Made just under 6 grams of bubble hash from the trim and larf (one wash). Recooked the single wash trim and larf into butter with additional sugar trim added. Made about 1lb of butter - dosing unsure, but potent :D