Idhdb

Kosher Haze fem 🚀 50/50 Hybrid (Kosher Kush x Karel's Haze) From Super Sativa Seed Club 💎 And seedbank.ge 🌱 Flowering with Mars Hydro FC 3000 🚀🚀 Also added some UV leds for finishing up. Flowering week 8, super frosty flowers, almost ready. Flushing... 💦 Day 60 trichome check video. Not ready yet, about 5 days away from harvest. ✂️

Day 85 - first day of Week 13 and she is going into darkness for 48 hours. Hasn't been watered since 2 days. Even though she looks the least done of all three, her trichomes are now a good 20-30% amber with the rest milky and some tiny bits of clear. I checked her buds on the calyx all around, from top buds to middle to bottom. She really shows a lot of heavily swolen calyxes, which I have never seen like that. I can now add that to the things I learned/experienced: calyxes swell a lot before the plant is finished. Let's see. My Girl Scout Cookies does not look like she even has calyxes. Funny individuals. Happy wedding cake day, almost 😍 Day 88 - out of darkness. She was in there for 2,5 days. Opening the drying tent she gave off a really strong smell of hash 😍wow. She has some nice looking buds and looks def. more done, but below her dress, she has some light fluffy buds. I have hung all of them now in the dry tent, after I removed some of the bigger fan leaves. One part of it, I think I want to low and slow dry in the fridge. I am interested in finding out about the difference in taste, when a more wholesome profile is retained. For anyone interested, I can highly recommend this forum and this article: https://www.420magazine.com/community/threads/drziggys-low-and-slow-drying-maximizing-your-harvest.366783 Another part I would like to use for fresh cut oil, also from here: https://www.420magazine.com/community/threads/fresh-harvest-infused-cannabis-oil.363371/ As with everything else, I was obsessing about the perfect dry room & conditions. I bought a small tent (40x40cm), a small oszillating fan hung over the buds/on top of the tent. Due to size limitations, I have the filter on the bottom with the duct leaving the tent at the bottom connecting to an exhaust fan. Inside the tent I have a humidity sensor from an Inkbird Humidity regulator. Connected to that is a mini-dehumidifer and a humidifier. I have set it to 20°C (68F) and 50-55% humidity. I'm excited to see how long my dry will last this time. My first grow was drying way too fast in the middle of the heat wave last year with 30% humidity. The overview added to the pictures, I started making over Christmas. It was when I noticed, that I'm a so impatient, and that something must be wrong, especially in the first weeks. I get so obsessive, that I tend to overcare. Which she showcases beautifully in this overview. I hope this will calm me down the next time. Oh my haha Let's see what the final dry weight is. My guess is about 25-35g. Any other guesses? Happy Wedding Cake day 😇

Otra vez, abro diario, una edición limitada , Casey rollex O.G. Es una indica que me muero de ganas de cultivar, quiero ver cómo salen realmente sus flores y que tal se comporta en interior. . La humedad al ser la primera semana la mantenemos Alrededor de 65% , la temperatura está entre 22/24 que no está nada mal, y el ph en cada riego lo mantenemos en 5.8. . Gama agrobeta. 0,5 ml x L Piramid , vía radicular. 0,5 ml x L Growth black line , vía radicular. 0,1 gr x L Cancerbero , vía radicular. 0,1 ml x L Tucán , vía radicular. 0.1 ml x L Flash Root , vía radicular. 0,4 ml x L Great Green , vía foliar. . Os dejo un par de fotos familia, espero que os agrade , buenos humos.

WEEK 1 FLOWERING Since I will use the 7 weeks AN full nutrients program, one week is only 5 days Keep doing LST and defoliation every day or two I am using 100% RO water and give water every morning with nutrients included 🌱

*Will probably trabsplant these into 1 Gallon Pots in 2 days. *Nothing crazy *Only 4 of 5 beans popped.

-SOAKING SEEDS STARTED AT 4:15PM on 4/2/22 All of them sank by the next day with a little stirring of the water - most of them were floating before I stirred the water then they sank & stayed underwater. -PLANTING SEEDS STARTED AT 6PM on 4/3/22 Seedling Starter Soil: 1 Coco Coir Block (hydrated with 12cups aquarium water) About 5 cups Vermiculite 4Tbsp Down To Earth Starter Nutrients Mycorrhizal Fungi Spring Water - watering the hole with mycorrhizal before planting seed & then again after planted. -AFTER THE FIRST SPROUT ON 4/5/22 Turned on seedling clip light to blue only, dimmest setting @ 20%. Keeping light on for 18/6 6am-12pm - 4/6/22 INCREASED BLUE ONLY SEEDLING LIGHT TO 50% It seems like they were slightly stretching for light **watch for light burn on cotyledon leaves** -4/7/22 MORNING INCREASED BLUE ONLY SEEDLING LIGHT TO 100% The plants are stretching even more I increased light to full 100%, it'll have to keep an eye on them & make sure they don't get light burnt or topple over from reaching -4/7/22 AFTERNOON SWITCHED LIGHT TO GIIXER The two tallest plant cotyledon started to droop to the side so I didn't want to take a risk continuing to try the clip light only on blue @ 100%. I have the Gixxer on only veg at a distance of 10" away from the tops of the cotyledon leaves. I also cracked the lid & put an oscillating fan on low just to give them a tiny bit of movement to strengthen their stems because they'll be tall and weaker with stretching. *I tried using a new seedling light & it was a failure - they are now stretching due to that light. I switched back to my trusted seedling light & hoping they'll be back on track.*

Tag 8 : Das umtopfen in 1l Töpfe hat den Pflanzen gut getan sie entwickeln sich weiterhin gut, auf Lichtintensität 50% umgestellt Tag 9 : Lichtintensität auf 60% gestellt langsam erhöhen und beobachten, es bilden sich kleine Kugel Trichome auf den Blättern die sehr gut duften wenn man sie leicht reibt. Gegen 16:00 Uhr das Wasser mit Biobizz CalMag 0.3ml/l versetzt und mit BioBizz Bio Down auf einen PH Wert von 6,4 gebracht, anschließend alle Töpfe befeuchtet und mit kurzer Wartezeit 150ml Wasser pro Topf gegeben was 15% Topfvolumen der 1l Töpfe entspricht, es entsteht kein Drain. Tag 10: Den Pflanzen gefallen die größeren Töpfe und anscheinend auch das PH angepasste Wasser sowie das zusätzliche BioBizz CalMag es wird stetig Blattmasse zugelegt. Tag 11: Die Entwicklung schreitet gut voran, heute um 09:45 Uhr habe ich die Lichtintensität auf 70% erhöht und beobachte wie die Pflanzen reagieren, ich denke morgen wird wieder gegossen, das Gewicht der Töpfe kontrolliere ich mit einer Waage. Tag 12: Heute morgen um 7:30 Uhr jeden Topf gewogen, anschließend befeuchtet und nach einigen Minuten warten Wasser mit einem PH Wert von 6,5 und 0,3ml BioBizz CalMag gegossen. Die Erhöhung der Lichtintensität von 70 % vertragen sie ganz gut aber ich kriege meinen VPD Wert nicht niedriger durch die hohen Temperaturen und geringe Luftfeuchtigkeit die durchs Fenster kommen evtl. muss ich nochmal einen Luftbefeuchter dazu stellen. Tag 13: Alles sieht gut aus, mit dem Luftbefeuchter kann ich den VPD besser regulieren, morgen wird umgetopft und gegossen, beim wiegen der Töpfe waren die Wurzeln schon unten am Topf zu sehen, heute gibt es nichts weiter zu tun. Tag 14: Die Töpfe sind sehr gut durchwurzelt ich denke der Shrooms Wurzelstimulator hat auch dazu beigetragen, eigentlich wollte ich heute in 5,7L Töpfe umtopfen schaffe dies leider nicht aus Zeitmangel. Deswegen ist der Plan die Pflanzen bis morgen weiter durchtrocknen zu lassen und sie ein bisschen mehr zu stressen. Morgen werden dann alle in 5,7L Töpfe gesetzt und ordentlich angegossen. Das ist das Ende der zweiten Woche. Mein Fazit: Es lief bisher alles gut eine Pflanze zeigt an den unteren Blättern einen Nährstoffmangel vielleicht kommt das weil ich sie am Anfang evtl. überwässert habe, trotz der schlechten Temperatur und Luftfeuchtigkeitsverhältnissen die ich durch den Luftbefeuchter seit einigen Tagen besser im Griff habe, haben sich meiner Einschätzung nach alle Pflanzen ganz gut entwickelt. Falls jemand diesen Bericht lesen sollte bin ich gerne froh Tipps und Hinweise zu hören da dies mein erster Grow ist. Morgen nach dem umtopfen gibt es wieder ein Update ;)

X

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

make the strongest

Growing perfect 2 pheno types i believe based on grow structure. flipped the switch aprox 8 days ago.

2-1 Got her first water in new home. Was not watered in during x plant. Let her dry what she had first. 7ml EM1 will get a bigger dose soon. Just to kick things off. Around 1/2 tsp recharge, 1ml drops of balance. 1.5 ml Silica. Ph 6.0 500 ml. 2-3 Wish I would have watered 250-300. 500 was a bit much, should be fine. Looks very happy and perky. 2-4 Looks like she may have the fungus. Removed first leaves. 2-5 Peroxide spray at lights out. Slight possibility on 2nd set of leaves. 2-6 Removed 3rd set up leaves. Oh my goodness not again! Foliar spray, Canncontrol 300ml water .8 ml CannC. As a precaution. Enlisted Valiotoro, light may have burnts when lights came on from foliar. I dont remember checking. Focused more on if spread. 😂 Hope this helps. 🤞 Sad that the leaf removal will slow her down. .

The plants are starting to fill out the scrognet. Might leave them vegging for 1, 2 or more weeks. We'll see how it goes.

Everything went well. Plants are drying , 18c/60%

Day 43 - I have started LST as this plant i know won't grow much in height, im gonna use it to teach myself techniques/perfect a technique. I hope ive done a decent job of it. Excited to see what happens over next few days. Day 44 - im very proud of my little plant. It looks so strong after the first day of LST. Definitely surprised with the results. Day 45 - Plant seems to be adjusting just fine to LST i do keep checking it. There is a bit of leaves overcrowding to pne side. I will probably have to move if i can! Day 46 - I'm thinking if i need to do more LST or just leave it now to grow. Day 47 - the plant is really starting to woden out and stretch as well. I need to see when it will flower it looks like it might do soon. Day 48 - The plant looks well. I believe she has started to flower so i really have to get my fan and filter asap. Day 49 - She defo started flowing and i just bent ome stem to allow more space between each other ;But they looks really good. Also entering another competition can't win if you don't partake.