The Grow Awards 2026 🏆
Likes
Comments
Share
@Satica_G
Follow
One seedling streched a bit, but thats not a problem. Besides that, everything went great! 3/3 Germination rate I am very excited to see the ladys grow. We couldnt order our grow equipment, so we started the plants on the Windowstill.
Likes
14
Share
D57/F13 - 27/05/23 - Added sunset and sunrise (only red lights for 1,5 hours at the start and 1,5 at the end) D58/F14 - 28/05/23 - I set up my AFD (see picture). I find a way to feed her automaticly when I 'll be out, Every day I start the pump for 30 sec (about) to give her 2 liters of nutes with my AFS (Automatic Feeding System) D59/F15 - 29/05/23 - Automatic feeding D60/F16 - 30/05/23 - Automatic feeding D61/F17 - 31/05/23 - Automatic feeding D62/F18 - 01/06/23 - Automatic feeding D63/F19 - 02/06/23 - I'm back, Nora looks ok, automatic feeding works. A little bit of problem with timelaps framing, but it's ok, I've got all info I need. EC 0.9 and pH 6.5
Likes
30
Share
@Hashy
Follow
******************************************** Week 15 Start of Fade(flower week 9) ******************************************** Light cycle=12/12 Light Power=125w 52% Extractor controller settings High temp= Day 26c, Night 20c Low temp= c Temp step=0c High Rh= Day 50%, Night 55% Low Rh= % Rh step=0% Speed max=10 Speed min=2 Smart controller settings (during lights on). Lights on=9.00am Top fan on=+22.5c Top fan off=-22.0c Dehumidifier on=+50% and -26c Dehumidifier off=-50% or +26c Smart controller settings (during lights off). Lights off=9.00pm Dehumidifier on=+55% and -20c Dehumidifier off=-55% or +20c VPD aim=0.6-1.3 DLI aim=30-45 EC aim=0.2-0.5 PH aim=6.0-6.5 NPK(0/0/0) 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= Autofeed 6 drippers. Feed=Flushing Nutes. Flawless finish=2ml/L Volume=8L Easy Ph down= 0.02ml/L ( 4 drop total) Ec=0.4 PH=6.5/6.5 Runs=16 Run times=5min (250ml each) Gap times=15min×14, 45min×2 Total runtime=80mins (4.0L each) Total flowrate= 100ml/min (50ml/min each) Auto start time=10.00am Auto stop time=4.05pm 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** ******************************************** 📅25/8/24 Sunday (day 99, day 57 flower) 📋 Sad Day, cat past away. After the drip system had ran for 75mins there was 5.5L water left only 33ml/min. Adjusted before last 5 min run. 💧 Method= automatic Feed=Flushing Nutes Volume=8.0L Easy Ph down= 0.02ml/L Ec=0.4 PH=6.5/6.5 Volume left=5L Volume used=3L (37ml/min) Volume each=3L (37ml/min) Runoff. Runoff=0.L Ec= PH=/ Extra 5 min @5.10pm Extra 5 min @6.20pm Runoff=0.L Volume left=4.5L(50ml/min) Manual=1.5L Runoff=0.2L Ec=2.2 PH=/6.2 💧 📅26/8/24 Monday (day 100, day 58 flower) 📋 📅27/8/24 Tuesday (day 101, day 59 flower) 📋 📅28/8/24 Wednesday (day 102, day 60 flower) 📋 Inspection, she is swelling and trichomes are nearly all cloudy, pistils are shrinking and mostly brown. I'd say she's about 1 week of harvest if she carries on at this rate. 📅29/8/24 Thursday (day 103, day 61 flower) 📋 messed up watering as had connected 1 pipe to the other plant to the system by mistake. 💧 Method= automatic Feed=water Volume=7L Ec=0.2 PH=6.3/6.3 (PH D=0.02ml/L) 3d Volume left=4L Volume used=3L (37ml/min) Volume each=1.5L (18ml/min) Runoff. Total runoff=0.L Ec=PH=/ Corrected system Water=manually @7.10pm 5 mins Water=manually @7.35pm 5 mins Volume left=3.4L Volume used=0.6L (60ml/min) Volume each=0.6L (60ml/min) Runoff. Extra runoff=0L Ec= PH=/ Manually watered @8.00pm Volume left=0.4L Volume used=3L Total Volume=5.0L ish Runoff. Extra runoff=0.2L Ec=3.5 PH=/6.3 💧 📅30/8/24 Friday (day 104, day 62 flower) 📋 📅31/8/24 Saturday (day 105, day 63 flower) 📋 ******************************************** Weekly roundup. 📋 I'm super impressed with this one now. She's bulked up great and looking like she's going to have a lot of solid buds with very little larf. I think she'll be harvest at the end of next week. So my next report may be the harvest report. Take it easy. Back soon. ********************************************
Likes
14
Share
This grow cycle was an overall success! These Apples&Bananas gave me some trouble along the way, but I am sure they will be worth it in the smoke! They smell so gassy and are very strong.
Likes
5
Share
@Falcon123
Follow
Gelly Cream Cake & Slurricane #7 S1 from seeds Platinum S1 & King Sherbet are clones Gelly Cream Cake & Slurricane #7 S1 techniques were used: Topping + LST + Defoliation Platinum S1 & King Sherbet techniques were used: LST + Defoliation
Likes
21
Share
🗓️ WEEK 8 (flo) - HARVEST WEEK (56° FLO) 💧 Midway through this final week of flowering, I performed a complete DWC reservoir change. I replaced the nutrient solution with plain tap water, EC 0.4 - pH 5.8. This flushing solution was maintained for 4 days, right up until the moment of harvest. 🌱 On the 56° day of flowering (day 84 from the dry seed), the plant appeared perfectly ready for harvest. The buds are dense and glistening with resin, nearly all pistils have browned and retracted, and the trichomes show a beautiful mix of milky and enough amber. Immediately after chopping her down, I removed all the large fan leaves and I've decided to dry these too as they are remarkably full of resin. ✅ DRYING PHASE The entire plant was hung to dry inside the grow box, which was kept completely dark with constant, gentle air circulation for 8 days. The average VPD during this period was maintained around 1.2 (approximately 20°C and 50% RH). Once this drying period was complete, I trimmed off all the sugar leaves. These resinous sugar leaves will be combined with the already dried fan leaves and larf buds, and I plan to use them to make cannabutter for edibles. ⚖️ DRY WEIGHT After the 8-day drying period, and once all the remaining small leaves and branches were removed from the buds, I weighed the final product: The harvest yielded: - 150 grams of dense buds. - 5 grams of finger hash collected during handling. For edibles: - 30 grams of larf. - A large amount of fan and sugar leaves. ⚠️ In the next coming days I'll update the harvest week with info about curing stage and a smoke review.
Likes
11
Share
@Bncgrower
Follow
Waiting the process lol.. another week completed and this girl is smelling a very very good and appeary everything is ok.. i hope to have a good result 🤞💪🌿
Processing
Likes
24
Share
**Encontrarás la traducción a español al final de la descripción** From/Desde: 22/07/19 || To/Hasta: 28/07/19 From day/Desde día: 0 || To day/Hasta día: 6 -----IMAGES & VIDEOS----- Video 1: I timelapsed the born time to seedling. I'm testing a new software for iOS that worths it's cost, it's called "SkyFlow", it has also the free version that can be used without paying. -----WEEK SUMMARY----- Hi buddies, i'm very happy to welcome you to my new Spliff Seeds AK single plant grow. In this grow I'm going to try to obtain a plant with 8 main colas, it's going to be more toppings + LST than a Man-Lining. Let's see where i reach with it ;). The first week was as expected, buried the seed on Monday night in a small pot (i'm not sure if it's 0.3 l, but +/-), it be came to seedling on Thursday afternoon and grown till Sunday as it should be. Equipment used ----------------- HLG 100 v2 (100w with samsung full spectrum Led's), also known as "Quantum Boards" DR60 growing tent (60x60 cm) 19,5 l AirPot Small static vent 10w Soil from Bio-Bizz (Light-mix) i will use a small layer of Hard-mix in the bottom of the AirPot on transplant -----WATERING CALENDAR----- 22/07/19 - 200 ml with all week nutrients @ 0.7 E.C. PH5.8 *****ESPAÑOL***** -----IMÁGENES Y VÍDEOS----- Vídeo 1: He capturado en timelapse el momento del nacimiento a plántula. Para ello he probado un nuevo software para iOS que vale su peso en oro, se llama "SkyFlow", también tiene versión gratuita que se se puede usar sin pagar. -----SUMARIO SEMANAL----- Hola compañeros, estoy feliz de presentaros mi nuevo diario de una planta AK del banco Spliff Seeds. En este cultivo voy a intentar conseguir una planta con 8 colas principales, será más a base de toppings y LST que un man-lining en si. Veamos hasta donde llego con ella ;). La primera semana fué como se esperaba, planté la semilla el Lunes por la noche en un tiesto pequeño (no se si es exactamente de 0,3 l pero +ó-), se hizo plántula el Jueves por la tarde y creció hasta el Domingo como debía. Equipmo usado ----------------- HLG 100 v2 (100w con LED's samsung de espectro completo), también se las cono ce como "Quantum Boards" Tienda de cultivo (60x60 cm) AirPot de 19,5 l Ventilador estático pequeño de 10w Sustrato BioBizz (Light-mix) usaré una pequeña capa de hard-mix en el fondo del AirPot cuando transplante -----CALENDARIO DE RIEGO----- 22/07/19 - 200 ml con todos los nutrientes semanales @ 0.7 E.C. PH5.8
Processing
Likes
34
Share
Ladies and gentlemen, I would like to proudly present to you my diary in which, for the next winter time outside the window, I begin a magical adventure with the famous gorillas in a rather exotic climate - and here I want to point out that the seeds were a gift from RQS. Once again I want to thank for the grinder that I use every day, the Vertafort fertilizer which will land in the soil, the posters that decorate the walls in my room (you chose my favorite varieties btw) and the 10 seeds of the Royal Haze which will surely be in the next project. So today I feel like I'm in a position to share with an adventure that starts here and now. I feel obliged to post new updates every day. Please also comment and give advice by colleagues in the field. Here is a list of things I will use: Soil: Biobizz ALL-MIX Fertilizers: All Biobizz Bio-Grow Bio-bloom Bio-heaven Top-Max Leaf-Coat Acti-Vera ALG-A-MIC Veg setup: Growbox 70x45x150 MH 150W GIB Lighting GROWTH SPECTRUM Advanced Humidifier 5L AERI Advanced Star 13W Fan Carbon filter ORIGINAL 75 - 100 M3 per H Axial Flo Fan 100 Peat pots: 7x 10X8cm and 3x 11X10cm And much much love Flo setup: Growbox Secret Jardin 120x120x185 Dark Street LED 2x200W ADVANCED STAR DUAL HPS 150W GIB Lighting FLOWER SPECTRUM Pro Secret Jardin Monkey Fan 20 Secret Jardin Monkey Fan 30 Fan PK125 MES 420m Coal Filter Prima Klima ECO 360 - 480 m3 I will soon describe more details. Regards
Likes
5
Share
New addition to the family donated kindly by @dropseedsnotbombs, just managed to squeeze this girl in hopefully she takes a liking to her new habitat an 19hrs light schedule 😃🌲🙏
Likes
26
Share
Processing
Likes
12
Share
@GrowGuy97
Follow
Have seen a lot of good diary’s on these had to get some for myself to see how it goes! Hopefully we get some super purple buds! Stay tuned & happy growing friends!🤙🏼✌️🏼🌱 Day 1 - Finally got them planted & water with fox farm big bloom (6tsp per gal) Day 2 - all 5 have sprouted & doing great! Day 3 - 2 out of 5 seeds have fallen off but they are all still growing & looking good! Watered them a little more this morning👍🏼 Day 4 - Looking great🙏🏼 Day 5 - Grow babies Grow!! Day 6 - Plain PH water 6.4
Likes
36
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Flowering day 23 since time change to 12/12 h. Hey everyone 😀. It gets more beautiful from week to week :-). The buds are starting to develop well. They also get thirstier and thirstier. Another 1 g of GHSC Bio Bloom per liter of coconut was added. Otherwise, the week was poured twice with 0.8 l each time and the tent was cleaned. Have fun with the update. Stay healthy 🙏🏻 You can buy this Strain at : https://originalsensible.com/original-sensible-seeds-zkittlez~20503 Type: Zkittlez ☝️🏼 Genetics: Afghan Kush Indica x Grandaddy Purple x Grapefruit hybrid 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
31
Share
@AsNoriu
Follow
Day 36. Girl is a stretcher, will have to do something, but most damage is behind and I think next watering I'll give her food again. Couple leaves taken off, couple branches bended , thinking to put support after main stretch will be over. Happy Growing !!!
Likes
37
Share
@Kirsten
Follow
23.08.24: I've done considerable defoliation. Also, FBP1 and FBP3 have grown all over the place. The stems are also relatively weaker as they've grown so much. (Photos above). Being as the plants were looking a bit delicate, I added some string and tied the side branches lightly to keep them a bit more compact. Additionally, FBP2 has a considerable amount of buds on the main cola. So I've added a plant stake, and I just tied string around the stake and the main stalk. The humidity has been able to stay under 53%. That's with 3 dehumidifiers. So I'm pretty sure that's about as good as it will probably be. I've had to lower the watering frequency on FBP3, as I overwatered only this plant. and also added too much Nitrogen in. As a result all the leaves are looking droopy. I'm really not sure how this will pan out, as they all still look like they're weeks away from harvest. Anyway, I'll update throughout the week. 25.8.24: I was tending to the garden a majority of the day, and realised that a branch had broken on FBP2. I acted quickly to insert plant stakes, to provide the heavily laden branches additional support. See photos above. The branch was bent or snapped, but still in one piece. I used duct tape to carefully put it back together. Before making a stake for it. Silica, apparently wasn't quite enough to get the FBP2 through the whole way. The flowers are very heavy and dense. I have also given the plants water yesterday with concentrations of the following nutrients, per plant. ● 9ltr of dechlorinated tap water with 6ml of cal-mag, 3ml of Ecothrive Flourish, 6ml of Xpert Nutrients Bloom Booster. I have also added cinnamon top dress after watering, as I have noticed some fungus gnats. I checked the trichomes through one of my loupes yesterday too, and nearly all are still glass like in appearance, with some cloudy here and there. I'm definitely going to have some time left on these girls. I did check the PH if my soil on all plants as I was concerned about nutrient lock out on FBP3. All pots tested out at 7.0 Ph exactly, before and after watering. Thanks for reading my diary 😊
Likes
24
Share
End of week 6, Beginning week 3 of flower for the OG Kush auto🍓🌱 Plant filled up the 60x60 cm tent entirely, and keep on stretching! And to think i was worried at the beginning that this plant won't get big 🤦🏽😅. I noticed some leaf curling/burning a bit, and some bleaching of 2 small leafs (not so sure about the bleaching), so i lowered the intensity of the cree cobs led to total 220W. This happened to me in my last grow (zkittles auto) as well. I guess the cobs can get too powerful for a small tent like that. I'll definitely keep an eye on that issue. Other then that all goes smoothly;) - I do some light defoliation to the plant every day, - in the next few days I'll do the big cleaning - lollipoping 🍭 and full defoliation. P.s - sorry about the bad lighting in this week's photos, I'll fix that next week✌️🏽