Likes
Comments
Share
@mikearon
Follow
May 24th - Day 97: It's amazing to see how well the babies have recovered. Unfortunately, two of them have pretty much died, but hey, more space for the others to grow! Humidity is still quite unstable because I increased the frequency of watering, but it will be fixed soon. I will update on Sunday. They're drinking really well, about 60L every 2 days for 10 plants. I need to figure out a bigger container to hold enough water for a whole week.
Likes
10
Share
Continuing to water every other day/when dry. Watered with Real Growers Recharge on 5/12/22. New 200w led grow light came in and is looking great!
Likes
18
Share
@Kirsten
Follow
The plant is doing really well. We are progressing at a normal pace. There isn't much else to report this week. These weeks are always slow and pretty boring. I'm just keeping the medium sufficiently watered. Here is what I did this week. 12.9.25: I watered with 1.5L of dechlorinated water PH'd to 6.4 with; 💜 1ml Trace 💜 1ml Flourish PH: 6.4 PPM: 318 16.9.25: I watered with 1L of dechlorinated water PH'd to 6.5 with; 💜 1ml Trace 💜 1ml Flourish PH: 6.5 PPM: 308 The fungus gnats have really incresed since I did a watering of the whole tent. I have some more sticky traps set out, and I will not water for several days. Once it has dried the top soil, I will add some more Diatomaceous Earth to the top 5cm. Thank you for checking in this week and hanging out in the comments 😁💚✌️🌱🤞🧡
Likes
38
Share
Alles läuft ohne Probleme 😍 Erst am 08.04.24 gemerkt, dass die Lüfter nicht optimal eingestellt sind. Eine Cam zu haben, zahlt sich aus. Mutter und mein erster Grow in Deutschland 😁 Frosty Nightmare estimated day of Harvest around the 27th of may. Gelato estimated day of harvest around the 25th of may. Sleepy Joe estimated day of harvest around the 25th of may
Likes
3
Share
Starting to get pom poms nice and early and throwing out tons of frost..had to raise light and dim to 75% was hitting 1300ppfd without co2. No good. Adjusted to aprox. 900-950 ppfd. Stretch is over woo-hooooo🙌
Likes
19
Share
@LST420
Follow
Week 22 Since I've removed the last Biotab the leaves have slowly start to turn more and more yellow. The buds are in the final stage of hardening out as you can see on the photos. In the beginnings of my grow adventures I was always focused on the percentage of orange to white pistils to determine their ripeness now I'm looking for that greyish look as if they suddenly turned into solid fruits that differentiate from the rest of the branch. For the last days I could mostly put my light on 100% strength. And even the difference in bud density between now (day 152) and yesterday is quite amazing.
Likes
6
Share
These girls are blowing up so I switched them to my bedroom tent and I also just ordered them a new light the ac infinity t22!!!!! I'm so excited to get that going next week. The phlizon I'm currently running is for a 3 by 3 and the tent is 27 by 27 inch. Back to the ladies so ones slightly shorter but darastically more bushy. The smaller one seems to get mildew issues is another reason I moved her to the smaller tent to drop humidity. The smells amazing and they are delightfully frosty for how early they are! Check back next week to see just how fast these buds are! & always remember its 4:20 somewhere!!!!
Likes
2
Share
Day 43: (Mon)Small plant is in week 2 of flowering. Fade already stated before buds have matured. Think I should have given more nutrients. Clipped a few leaves off big plant near the tops. Watered both plants with nutrients 1ml B, 1ml SR and the small plant also got 0.5ml GS Day 45: Watered small plant with same nutrients Day 46:(Thursday) Watered big plant with 2ml B and 1ml SR Day 47: Watered small plant with just ph’d water Day 49: Watered big plant with 2ml B, 1ml SR and 1ml GS. Watered small plant with half dose.
Likes
9
Share
. 📹: Video on YouTube @hinterhofgrower please like & subscribe 🌱: Training day 88, 90 💧: 4l day 88, 4l day 90 💡: Dli 45 mol/m²/day 🤔: By week 13, the heatwave had passed. In my view, the foxtailing has been confirmed. The plant continues to be closely monitored; I am continuing to check the buds for mold and ensure optimal air circulation.
Likes
24
Share
COLOMBIAN JACK by KANNABIA Week #12 overall Week #1 Flower This week is her first week of flower she's been topped a few times during veg and the smaller under branches have been pruned away so she can focus her energy on the tops. Stay Growing!! Kannabia.com COLOMBIAN JACK
Likes
5
Share
She is growing nicely and she has been really easy to grow. The only problem I have been having is humidity issues off and on bc of the weather but I added an extra inline fan. The buds are coming in and im just making sure they fill the scrog out.
Likes
5
Share
6. Woche Sie wächst sehr Buschig und wechselt langsam in die Bloom. Denke sie kriegt noch einen Stretch in den nächsten Wochen 😀
Likes
136
Share
Today was the day! Both girls have been chopped at day 55 of flower. Reason being is after 2 days of plain water **(I’m aware this is a short flush, but nutes were tapered down in the week leading up to this, then with plain non pH’d water there was 6 fertigations, 4l per plant per time over the last 48 hours - the runoff has been coming out plain 0.3EC tap water, same as the inflow).** The trichomes that we’re only cloudy on top had began to change over to amber and the lowers that were clear became milky after having plain water so I pulled them down for peak potency. Maybe could have had a couple days more but not the end of the world I am still very happy so far with the result from what I can see so far. I have just removed the largest fan leaves off and separated into branches or more like clusters of tops on branches. In a couple days I will probably remove a little more leaves or if they are drying evenly and nicely I will just remove them when I dry trim. They are now hung inside the tent, aiming for 18-20°C temps & set to 50% RH, hooked up to a Inkbird Humidity Controller and a dehumidifier. Hoping these will take a week to ten days to dry so the flavour and smell is not lost. Both Phenos of this strain have come out in beautiful colours under the torch on video, I can’t wait to see them both when their dry and all trimmed up in all their glory. That’s all for this week, in 7-10 days hopefully they are dry and I will update with the harvest week with the final weights and some trimmed up pictures! 🤙🏻🙏🏻💚
Likes
89
Share
@nonick123
Follow
TrolMaster me está ayudando mucho con el control de VPD! 😍💪🙏 Estos días hace mucho calor en mi zona, y la alarma de "Humedad baja" me ayuda a reaccionar para controlar la VPD Genial equipo en mi armario! 😍 Día 73 (01/04) Riego 0,5 Litro H20 sin nutrientes. TDS 225 PPMs - pH 6,6 Día 74 (02/04) Riego 1,25 Litro H20 + Wholly Base 3 ml/l + Solid Green 1,75 ml/l + Big Bloom 1,5 ml/l de Gen1:11 TDS 1050 PPMs - pH 6,2 Día 75 (03/04) Wedding Cheesecake FF tiene tanto peso en los cogollos que las ramas laterales empiezan a caerse por su peso 😍💥 Voy a colocar estacas de bambú para estos últimos días Día 76 (04/04) Riego 0,5 Litro H20 sin nutrientes. TDS 225 PPMs - pH 6,6 Día 77 (05/04) Riego 1,25 Litro H20 + Wholly Base 3 ml/l + Solid Green 1,75 ml/l + Big Bloom 1,5 ml/l de Gen1:11 TDS 1050 PPMs - pH 6,2 Día 78 (06/04) Las plantas empiezan a mostrar reflejos morados en la punta de los cogollos 😍💜 Wedding Cheesecake FF huele a galletas de mantequilla, queso y sutiles bayas rojas Día 79 (07/04) Riego 0,5 Litro H20 sin nutrientes. TDS 225 PPMs - pH 6,6 💦Nutrients by Gen1:11 - www.genoneeleven.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae 🎚️Controlled by TrolMaster TCS-1 Tent-X System Main Controller - https://www.trolmaster.com/Products/Details/TCS-1
Likes
9
Share
@Unnamed
Follow
This is the start of my second grow and also second Northern Light Auto from RQS, the goal is to hit #1 in g/plant for that Strain. I didn't take as many notes as in the last grow but there are timelapses, some photos and metrics from probes. Started with 3 Seeds and then picked the 2 strongest. The System is a NFT System but due to the size of the tube and root growths the solution with submerge the roots ~70% later on. To combat that I use 3 small 1.5w air pumps, these are super silent, if one dies I got 2 more running and to be honest air pumps used in DWC systems are often oversized and rely on Broscience. In my Salad/Herb NFT Systems I don't use any air pumps and the plants are just fine and grow great. This time I added sprinklers to humidify the air inside the tube, slightly moisturize the Rockwool and speed up root growths. Spoiler: Was a great success :) The ratios for the fertilizers are not accurate in the following weeks, I have a 120l Reservoir that is filled 90-110l I top it up once or twice a week to sustain PH and EC, if you want to copy it just go by the EC and use the B (Calcinit) and A (Kristalon Blue/Orange) 50/50. I mix the solution myself with dry salts that I bought in bulk 25kg bags. 4l Water(distilled/RO preferably, tap water is OK) + 1kg salts mixes just fine, keep the solution dark and cool and it will stay stable for months. Dry salts don't expire if kept cool and dry so only mix what you need and keep the rest stored as dry salts. 40ml A + 40ml B is about 2EC and 6PH with my tap water, very similar to Canna, Plagron etc. isn't it? just with the twist that I pay ~20% of the known brands. P2O5, K2O, MgO etc. are always the same as long as they are produced by a good manufacturer, Yara is a world leader in fertilizer production just not to be found in you general hydroponics or hardware store. Any other known manufacturer is fine as well, pick the cheapest. Check Hoocho on Youtube to see a guide on how to mix your own solutions, it ain't that difficult trust me. From week 5 onwards I also use Oxygen granulate (KMPS, CAS-70693-62-8, 2KHSO₅ * KHSO₄ * K₂SO₄) if you want to use this check pool supply stores and buy the cheapest. Keep this one dry, cool and dark. I used a old pill bottle to keep some ready to go because it came in a 1kg container and I only need 2-4g per serving + the bottle has a silica pack in the cap. From week 6 onwards I used Haifa Grow Clean for Details check week 6, I use this one as dry salts and add it directly to the tank, it does not interact in a bad way with the solution. For meassurements I use a generic 8in1 Meter "PH-W218" branded by many companies, as usual, check stores and buy the cheapest. (Check week 1 for an image of it) I got mine from Aliexpress for ~70€ it uses the Tuya app so you can always check your metrics and export them aswell. The PH and EC probe are accurate and are giving me stable results for almost 1 year now, I re calibrate the PH probe once in a while and it is tops 0.15 off after a month, always double check your results with PH drops/paper. Bluelab is... A LOT more expensive for less value. For the timelapses I use 2 Tappo C210 2k Cameras, these have the ability to make the stream available trough RTSP so that you can access it trough a link in a browser and that way I snap a Screenshot with a raspberry pi :) after that I just render it with blender to a timelapse. Sadly they seem to have trouble with the bright lights and I get image trouble over the course of the day, if you have a recommendation hit me up :) The script I use to take the Images: #!/bin/bash ########################################################################################################################################## ##### A script to save images from a rtsp capeable IP cam, Tapo C210 (2k image quality) for example in my case. ##### Images are saved in a directory named "2024_01_01" for example, it uses the "date" command within the system it is running on. ##### You can then render the images to a timelapse, I use blender for that. ########################################################################################################################################## RTSP_URL_LEFT="rtsp://:@:/stream1" #sets the variable for cam LEFT access RTSP_URL_RIGHT="rtsp://:@:/stream1" #sets the variable for cam RIGHT access while true; do TIMESTAMP=$(date +"%Y_%m_%d_%H_%M_%S") #sets the timestamp variable DIRECTORYLEFT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for LEFT DIRECTORYRIGHT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for RIGHT mkdir -p "${DIRECTORYLEFT}" #makes a directory for each day if it doesn't exist for LEFT mkdir -p "${DIRECTORYRIGHT}" #makes a directory for each day if it doesn't exist for RIGHT ffmpeg -y -i "${RTSP_URL_LEFT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYLEFT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for LEFT ffmpeg -y -i "${RTSP_URL_RIGHT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYRIGHT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for RIGHT ################################################################################################################################ ##### Waits for 180 seconds, change that depending on how precise you want the timelapse to be, less waiting = more images ################################################################################################################################ sleep 180 done Hope you like my diary, leave a comment and a like if you like it :)
Likes
5
Share
@Do_it_Dan
Follow
What can I say except I'm shocked at these @tastebudz genetics, she's exploded out of no where in this past week! I can see her fattening up swell 👌, see you next week and remember happy growing and stay green ✌️ 💚 👌
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 04/01/2020 - Did the last defoliation, removed about 1/4 of plant material. 06/01/2020 - Fed her 1.5l of 6.5PH water with 0,3ml Cal Mag (Atami) 0,25ml of Grow, 0,6ml of Bloom and 0,5ml Max, and 1ml of each: Heaven, Alga-mic and Vera, noticed some run off, I use about 1/3 of the nutrient dosage on the chart, to achieve about 200/300PPM (500 scale).
Processing
Likes
3
Share
@Kushizlez
Follow
Day 33-40 (May 24th-May 31st) (Day 34) I just found a herm branch on the tight blueberry pheno. It looks like a random pollen sack opened right above a lower branch. I removed the sack but I saw a small amount of dust fall onto one of the lower branches. I’m going to leave it to see if it will pollinate that small branch at all. I spent a good 5 minutes looking closely for bananas or claws but couldn’t find anymore. The main bud is clearly unaffected so I will just leave it unless it is visibly seeding itself. Too bad because I’m really excited for this plant. (Day 36) Not a lot has happened since I flushed them. Growth actually looks healthy and I don’t see any deficiencies on anything yet. (Day 37) Both of these badazz cheese phenos are picture perfect and easily hold up against Canadian and California quad grade. I might try to reveg them at the end and take some clones. They have this unique pungent, grassy, sour milk smell that is just wonderful. The density and bud structure is looking great too. This whole plant will probably take 3 minutes to trim if that. (Day 38) Just found a banana on the shitty blueberry pheno. This pheno is trash and I would honestly throw it away if it didn’t mess up the 3 perfect rows. It has almost no frost, no smell, is airy and has bad structure. I’ve actually never seen a plant with such little frost. Even outdoors. (Day 39) I think most of this tent will be done by day 60 but I will probably ride it out until day 70+. I don’t think the blueberries or the jacks will fill out very much either way but taking it too day 70 will ensure maximum production from each plant.
Likes
8
Share
I harvested them on day 58. A very sticky job. The branches were hung upside down for 10 days at 17 °C and 60% RH. After that, everything was jarred up, where it will now cure over the next few weeks. Overall, I’m very happy with this run. Aside from a few minor issues, everything went smoothly.