#2 some LST for multiple tops. 😎 11-22-17 flipped to 14-10 top dressed with 0.0.7-0 budswel to start her moving things around getting ready to flower.😎 PS. Repotted trained on to 3gal.she will need more room for multiple tops!😎

Looking like 3 more weeks until harvest. I’m going to start flushing in about 10-12 days

FBA2505 is doing okay. She has had a good growth spurt after beating the root rot she has started to show pistils. Everything is looking a lot better then it was. Thank you Medic Grow, Athena, Xpert Nutrients, and Fast Buds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

Wow she over doubled her height this week. Grew 15cm! Now she's 25cm tall.

Starting to see a lot of white hairs think they are getting ready for flower, extremely excited to see how these ladies do! Thanks for checking in & happy growing friends!✌️🏼🌱 Day 23 - Everything seems to be going ok can’t see any issues other than the one plant with spots on the leaves but that is from spilling nutrient water on them! Day 24 - started LST on 1 Orange Sherbet & 1 White Widow to compare the differences at harvest! Day 25 - they are looking great! Can’t wait to see how the buds look😍✌️🏼 Day 26 - stretching out a lot! Day 27 - Last day of week 4 everything is going great!✌️🏼🌱

CANADA DAY UPDATE🇨🇦 THE TRAGICALLY HIP🤘🥁🎸🇨🇦 MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛

Bannandaddy auto by ethos genetics it is a brilliant plant a bit small but 10/10 buds, smell like redbull lol

Good week. Everything is going great. Plants are still stretching. Could of done more LST but running out of space. Have a few strains going in the same tent. All got pretty big

Was happy with how these plants grew but think I will stick to mainlineing

Week 7 - Flower 3 Sangria - by Twenty20 Mendocino 4Q 2022 Veg Week 4: Wednesday 01 February - Tuesday 07 February 2023 Start of Veg - 1 Node Start of Week: [ 2022-02-15, SA20 50:B3:7:1] End of Week: [ 2023-02-21, SA20 56:B3:7:7] HeightWeekStart: [ 10.5, in] HeightWeekEnd: [ TBD, in] Start Date: 28.12.2022 # Seeds Wet Harvest Window: 17 - 27 March 2023, 79 - 89 Days EnvironmentGermination - LightDistance: [ 14.5, in] - LightStrength: [911, 505, µmol/m2/s] - Temp: [ 79, 85, °F] - RH: [ 73, pct] - HumidifierTrigger: [ 69, %] Fertigation (BioAg, Mammoth-P) - [x] R&R/Recalibrate BluMat’s at next IDEAL pot moisture __________________________ Wednesday 15 February 2023 SA20 50:F:7:1 Thursday 16 February 2023 SA20 51:B3:7:2 Friday 17 February 2023 SA30 52:B3:7:3 - Blumat watered to 400 ml Runoff. Turned sensor knob 1 pt Tighter. - Nonetheless - plants look Awesome, and Saturday looked Better!!! Saturday 18 February 2023 SA20 53:B3:7:4  - Adding BioAg CytoPlus to Res - Ful-Power: [ 20, ml, gal], CytoPlus: [ 1.25, gm, gal], Photosynthesis Plus: [ 6, ml, gal], SLF-100: [ 5 ml, gal] Sunday 19 February 2023 SA20 54:B3:7:5 - After EMPTYING the Reservoir yesterday - Sangria is cranking her transpiration, pot is demonstrably lighter. We’re cooking w/ Gas!!!! - Added CytoPlus cited yesterday    Monday 20 February 2023 SA20 55:B3:7:6 - [x] Crank Light to Maximum Height & Reset CORNERS @500 PPFD (For full Light penetration) - Monitor TEMPs (May have to reduce to maintain cabinet temperature < 82 °F - [x] Monitor TIPS for Light Burn as we’re 200 PPFD Above Optimal CORNERS  CENTER  Tuesday 21 February 2023 SA20 56:B3:7:7 - 0800 Look, bleh - an hour later - happy. And it looks like SHE WAS WATERED AGAIN. - Basic goals - Raise Light to maximum, adjust light w/ Dimmer. Min Corners ~500, Max Center 1000, PPFD - [x] Adjust dimmer to nominal 500 PPFD in Corners - [x] Turn BluMat down 2 pts - [x] Raise light to top of Cabinet # I want it DRYER IN THE BOTTOM than BluMats current setting. Light DistanceCanopy: [ 15, in] Light DistanceCenter: [ 13, in] WaterAmt: [ 1350, ml, day]

I don’t know what’s going on with my big girl I think is wind burn by me increasing the airflow I’m thinking it’s windburn well anyways I don’t know if it’s budrot cause I really want to chop thoses two tops off just incase help anyone if you know what this is

So she sprung up during the week!! Lets see what she does. I'm in need of a sativa strain at the mo.

Final week with all the girls, I found mold in two plants, approx. 1-2 gram I must throw out.

Hey huerteros pues asi va esta sativa dream que hoy hace su dia 46... y nos veas como esta desarollando! Seguimos aplicando LST ... para ir abriendo la planta y haciendo una buena estructura para cuando llegue la fase de floración!! De momento solo regamos con agua y cada 10-15 dias añadimos microbes! El sustrato es All mix de biobizz y ya viene prefertilizado asi que por nutrientes no sera y la planta asi lo demuestro con ese verde tan vivo! Esperemos que todo siga igual... iremos subiendo contenido asiduamente todas las semanas! Saludos desde el sur 🇪🇸

1/24 Seeing balls I think :( - Welp - Confirmed they are balls, #2 has them also, not sure if LST caused to much stress or what. To much pride to just kill them all. I will continue this grow concealed in the 3x3. Honestly thought I was doing everything right. Going to leave them together, I got a auto water system to help keep tent closed more often. Doing this for the experience, will deep clean tent and all equipment after. I guess my goal now is to just finish her up, I'm 4 weeks through, going to try to use this bud for edibles, etc. This is for the people who had a hermie, wanted to continue growing it, but couldn't due to there conditions. Here ya go, this will be a fun run. If this isn't a good idea let me know LOL. 1/25 - (early morning) after a little researching and thinking, I think I'll just kill the hermies out. #2 had the same sacks. Going to keep a close eye on #3,#4, but so far they haven't sexed yet, ended up chopping #1, #2 for the better. Done buying cheap seeds, I have went through recommendations to find the best genetics and a more reputable breeder, very soon will start diary on that which I am very pumped for. With 2 of these out now, Planning on putting another strain in with them. I got a little unmotivated experiencing this, but figured rather fix it now then set my self back another 4 weeks. Hopefully we still have luck with #3, #4 will hope for the best! 1/30 - Since chopping #1, and #2 due to them becoming hermie, I definitely lost some motivation on this run. I still have been watering and adjusting canopy with trellis. They have definitely blown up since 1/25, and are giving me much more motivation moving forward. I gave them recharge today. I have started slight LST again but just bending the top cola so it won't grow higher then other colas. I have started another run with Brother Mendel Genetics, and will be starting another grow diary series on them. Look out for it. I do apologize for the late updates, I hope you enjoy the updated documentation. Closing this week out, Definitely had a roller coaster typa week but things are starting to look up. 👉Check out My Instagram for daily updates @Seed2Weed_YT👈 Will Follow Back, Let's Grow Together 💪

Probably going to need some water agin here soon. I haven’t fed them yet. My other tray is starting to catch up. I am still not using any artificial light. I will start using something to keep them in veg longer but other than that they will be full term.

Welcome to my Slurircane Diary sponsored by MSNL & Spider-Farmer Days 56-63 only got days 56-58 & 63. Plant has moved from Pre Flower into fatthing on Day 58 r so. With the attempted Reveg. Pre flower was lost and any stretch. I now know when or how to stop a plant In its tracks.. during pre flower. Throw it into reveg (keeping dli within limits as if not, it'll continue to flower. So keeping in in the right DLI range is needed for reveg. I pult mine a just short of a week into it. And it was just a few days into pre flower and I stalled her at the height of 41cm. Another week maybe 2 of reveg would of got growth going again. But I decided to push ahead with fattening. She did put on a few cm finishing her pre flower but, nothing compared to what would of been if I hadn't of stalled and reveg. This can go bad. But, maybe I'll try again. As the colas, well, I've not had them like that. Not as this early stage. Look already how filled out they are. Will be short but mass should be good. Another 5-6 weeks of flower. High ppfd and 8-1300 co2. Diet/Defoliation Have moved her off Power Buds/Roots & moved to Green Sensation & PK 13/14. Done a hard defoliation and she has started putting on nice mass. Really happy with how she looks. Really healthy & Happy. She's a fast mover. Topped out a 41cm her tallest node. Most are 39.5 with an even canopy. I done 2 15% defoliations. Removing inside leafs around her nodes to allow air to move through the canopy. Premoting co2 exchange pushing newly made o2 out of the way on the stomata vent levels. As soon as plant hits ripening a lot should also be. So, I'll figure something out by then. Maybe an SF-1000 finish under low temps. As my main tent will be pushing 33-35c until end of the summer and beyond. This won't do for ripening. So, I've the perfect light for it. 900ppfd maybe I'll use at 80% and ripen her up nicely in 25-27c temp. Thanks to my sponsors from MSNL & SPIDER-FARMER. Much appreciated for allowing me to test your products. Also, to those who stop by. I thank you and look forward to seen your work.