Recommended
Likes
Comments
Share
Following The Grow Boss tips on YouTube "...yield is based on light, quality is based on growers talent" "...number one problem is, too much light, too much water, too many nutrients" Nutrients : (after having issues with nut burns, I decided to use Grow Boss's perfect ppm calculator) Invasion T (Glomus intraradices BEG72 and TRICHODERMA atrovide MUCL45632) 1g / plant Monster X mycorhizes (500 000 propaguls / Kg , made in vitro) 2g / 20cl then complete to make 1l Humic Fulvic Booster (humic and fulvic acids) 1ml / 1l Cannazym 2.5ml / 1l Rhizoponics 0.4ml/1l Lights: 2 x Adjust-A-Wings Avenger 600w HPS Lumatek 90000 Lumens 1000PAR 600w HPS Philips Son-t Green Power 95000 Lumens Soil:Platinium Royal Mix premium quality What is vapor pressure deficit? Often, marijuana growers who have their plants in indoor grow tents or rooms with artificial lighting, take into account parameters such as temperature and relative humidity to maximize plants growth and bloom, thus obtaining abundant harvest with top quality flowers. As we will see later, these factors affect different processes of the plant, such as transpiration or nutrient uptake. However, we usually forget about another important factor that is related to the aforementioned ones: vapor pressure deficit or VPD. Broadly speaking, VPD is the difference between the amount of water vapor that the atmosphere is able to retain (which depends on temperature) and the amount of water vapor contained in it (relative humidity). It is usually measured in kilopascals (kPa). Providing our plants with a correct relationship between temperature and relative moisture will keep us on the right VPD parameters, increasing the plant’s activity and thus improving its growth and showing its full potential during the flowering phase. The ideal would be to adjust both parameters (temperature and humidity) to get the best possible VPD value, so that the development of plants will be amazing.In the chart above you can see the right temperature and moisture values to maximize the development of cannabis plants. The green zone shows you optimal values of VPD, in which it would be ideal to maintain the environment. The orange zone shows correct values, in which plants should not have problems to develop normally. However, red areas show values in which your plants will be very far from hit their full potential, since the relation between temperature and moisture is not optimal. With relatively high values of VPD (between 5 and 12) plants tend to open their stomata and release a considerable amount of water vapor into the environment (increasing their transpiration). This increase in transpiration results in an increase in the plant’s photosynthetic activity, which will need more nutrients and will improve its overall growth, both during growth and bloom. The best range is between 7.5 and 10.5, which we have marked in green. However, we must be careful that VPD is not too high (dark red zone) since the plant would close its stomata to avoid releasing too much water vapor to the environment, which would result in fast dehydration due to excessive transpiration. On the other hand, if VPD is too low (light red zone), the plant will also close its stomata for not releasing more water into the atmosphere, which in this case would be already saturated (it would have reached the maximum water retention capacity in a specific temperature). In this way, reducing transpiration will also reduce photosynthesis, which has a direct impact on the plant’s development and yield. That way, VPD is essential when it comes to offer the best conditions for the development of plants, also to understand its water requirements according to the nutrients used and thus adjust them correctly to meet the grower’s expectations. N/B: SAY NO TO DRUGS -[Day 90] The plants are getting massive, not a lot of space left in the room, each pictures are token back against the wall or on top of a chair. The Super Skunk shall be ready first , the trichomes are visible without using a microscope, the scent is like an amazing candy floss coated with Skunk pee 😅Boerejongens quality @Home 😊 -[Day 93] Switching Buld Lumatek 90000 Lumens 1000PAR to SuperPlant Super Red 85000 Lumens 2000K 1498nm Lightening under the 1500nm wavelength (2000K) just between the NIR and the Microwave length, can't stand in the room too long without getting tears and shining eyes. Buds shall start to blowup like pineapples, increasing yield. -[Day 98] Everything is getting frosty. Starting to decrease RH . -[Day 103] Today the Y Griega started to push on her terpenes, believe it or not that plant smell stronger than the 6 giants Skunks (the Skunk strain is already a very strong smelling plant), she smell like a coffeeshop front door, the fragrance is absolutely amazing and fantastic, I will definitely grow a full crop of that strain ! -[Day 105] 42 days of Blooming folks ! It's getting serious now 😄 If it can helps you to realize, each plants gots 4 side and a middle, each sides gots 4-6 buds and there's 5-6 buds in the middle, there's 11 plants of 1,60m/5.25ft, how many buds does it makes ?? The correct answer will win 1 like 😅😂😅😂 -[Day 106] WEEK 7 of flowering, the end is close my friends, I'm trying to give you the best shots as possible, I wish I'd could share a good smoke from this crop with you guys ....😉 -[Day 113] WEEK 8 starting, every beginning has an end, this is where the Fall is gonna start. -[Day 115] LADY'S AND GENTLEMEN !!! In the Indica's category the winner is .... ruuuuummmmmbbbbbllllleeee ..... VANILLA KUSH !!!!!! I've seriously tough the Super Skunks will be ready first, but Vanilla Kush has shown milky tric's after 52 days of Blooming, waiting for some few ambers tric's before starting the Flush.
Likes
28
Share
My pictures seem to have re organized themselves, just give me a few here and I'll get the full rundown . So this week ( day 21-23) was MAJOR defoliating. What my first step is to start taking the largest fan leaves . My next step is about halfway through the canopy I'll stop and then I'll start working on the very bottom of the plant now at this stage in the game anything that doesn't even have a nice Bud site so a nice white hair sticking bud at the very bottom like shoots I'll just cut them right off. This is the first steps of a main line but I don't complete the actual full main line I probably will try it sometime soon just not this time. So you take off anything that is a small shoot coming off the main stems and then your next step is . STOP. It might be a minute it might be 10 minutes, 20 min , it might be an hour or more ( my tip is don't wait a full day I try and do it within the first 12 hours of starting it) but I always stop just to look at what I've done sometimes if you get going too quickly you can end up doing way too much. Stand to talk to canopy and look what sites are getting hit by light what places are these families beneficial to use for photosynthesis. Anything that is not doing as much good will be taken off and at that point I'll probably do another you know 5-10 minutes of defoliation maybe take one or two more shoots at the bottom to ensure what's left there is a huge fat cola that's going to give you those huge buds . After this you're going to want to do your best to support those stems that are going to hold a lot more weight as if the plant would have been with all the shoots so you're going to want to just make sure that you have staking in place or some sort of support system to keep them from flopping over a breaking them in the future because that's one thing yeah it's great but then it'll get to a point where oh no stuff falling over and then it's just more hassle than it is helpful. I got alot more pictures to follow this week so stay tuned !!!
Likes
8
Share
@4leksz
Follow
Diese Woche habe ich mir etwas einfallen lassen damit ich nicht nur Photos hinterlasse sondern auch etwas über mein System erklären kann. Letzte Woche Sonntag habe ich einige Plants getoppt und sie schauen soweit ganz gut aus. Ich hatte leider letzte Woche he ein Problem mit dem Root Juice von Advanced Nutrients die Nährlösung in den Tanks ist gekippt. Ich habe es erst am zweiten Tag gesehen und habe sofort alles geputzt und Wasser gewächselt. Danach wieder alles eingestellt und läuft. Ph: 5.7 Ec : 0.9 Ich habe auch jeweils 20g Mineral Magic in die Nährlösung hinzugefügt und 1 Teelöffel davon um den Stil der Plants gemacht. In meinen 2 Videos findet ihr mehr dazu. Happy Growing :)
Likes
5
Share
8th days/Flowering /little change 10TH DAYS OF FLOWERING DUE TO RAIN HAD TO TRIM BOTTOM -LITTLE EARLY MY HUM WAS HEATING 70 TO 76 BLOWING FANS.... AND CHECKING FOR SEX POP 9 SEEDS 100% SUCESS AND ALL FEMALE THANKS TO COPY CAT GENTICS. 11TH DAYS -FLOWERING RAINING SEASON HAD TO TRIM BOTTOM FOR AIR VENTILATION MY HUM HITTING 72%.......T T DUE TO RAIN RUNNING EXTRA FAN FOR AIR VENTILATION. EVERYDAY PLANTS GROWING ABOUT 2 TO 3 INCHES LET'S GO GOOMIES
Likes
3
Share
Likes
49
Share
@Roberts
Follow
FBT2401 is starting her bulking stage. She is due for a solution change. It looks like the mixture is getting too strong for her. I will be doing that very soon. Likely tomorrow when I have more time. Beside that everything is looking pretty good now. Thank you Fast Buds, Medic Grow, and Athena. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419
Likes
42
Share
@DrLaggis
Follow
🌱 Day 29 - First Day of Flowering Phase 🌱 Hey everyone! 🌿 I'm super excited to finally enter the flowering phase of my first grow! I have to admit, I was quite surprised to see that the plant had already been in pre-flower for three days and are developing really well. 🌸 Current Conditions for the Flowering Phase: Watered today with 800ml + 1ml/L BioBizz Bloom 💧🌿 Humidity: 50-55% 💧 Light: 100% intensity, 50cm distance, 16 hours light, 8 hours dark 💡🌙 Current Issues: I'm dealing with a few small yellow spots on the leaves, which seem to be caused by a calcium and magnesium deficiency.
Likes
5
Share
@Ninjabuds
Follow
Obama runtz x gas tax sad to say both seedlings are super crappy so far. If it was not for the gas tax parent being the best flower ever then I wld just toss these but sometimes the crappy slow growing plants end up being super dank It's looking like a good start to a week the plants are strong they are getting to the point I can let the dried dry out completely. I'm thinking by the end of this week the plants will be starting to be sold. Last week I put all the plants into my bigger 2x4 tent with my medicgrow mini sun 2 the 500w version. Only a few of the plants were ready for that light. Seems like the only plants that really have good resistance and have a strong start are the weedseedsexpress.com seeds. Shout out to weedseedsexpress.com for the strong plants. I ended up putting all the plants back into my 2x2 tent with the 55w amazon light it has alot more blue light in its spectrum. It's kinda weird b4 I switched the plants to the 2x4 tent they were getting 220umol under my amazon 55w led then when I put them under the 500w light 25% strength about 50in from plants and they were getting only about 195umol in that tent but it was stressing most the plants. I assume a larger light has more side lighting hitting the plants. I think when useing larger lights it's good to measure umols from the top but also coming from the sides. I think durring seedling stage they only need about 50% the umols coming from the side the plants as the top is receiving. When I put the plants back in the small tent about the same umols as they were getting b4 the switch and they were still a little stressed. So for a few days I put the small light at the top the tent giving them 100umols for a few hrs then 130umols the rest the day.
Likes
43
Share
~ Seedsman Zkittlez Auto ~ Zkittlez (Grape x Grape Apple) Auto x Auto Fruit (Auto Fruit Cheese x Auto Blueberry) Zkittlez Auto is one of the very sweetest-tasting auto strains available anywhere. It is a sativa-dominant (60%) strain that was bred from Zkittlez (Grape x Grape Apple) Auto crossed with a male Fruit Kush Auto, the latter a remarkable fruity strain bred from Fruit Cheese Auto and Blueberry Auto. Growers can expect to harvest some good yields of high-THC buds. Zkittlez Auto remains a fairly short plant, rarely exceeding 120 cm. in height wherever it is grown. This is a vigorous plant which is able to metabolize a high level of nutrients and she's a thirsty girl too! If growing indoors close to neighbors it is strongly advised to ensure good and effective carbon air-filtration in order to neutralize powerful odors. This strain's life-cycle is approximately 90 days from seed to harvest. The leaves on this plant are big and wide serving to convert every lumen available into Zkittlez goodness. Indoor growers should obtain between 400 - 500 gr/m2 while plants cultivated outdoors will produce slightly more at 500 - 600 gr/m2. Lateral branching is very good and it is recommended to use supports/ties to prevent snapping and keep buds close to the light source. This strain's scent is sweet and fruity with candy and berry notes. Its high-THC has been measured at between 21 - 24% with less than 1% CBD. The effect is well-balanced, cerebral and euphoric, and is very good for social situations as well as for relaxing in front of the TV either alone or with company. It also has the added effect of helping to relieve chronic pain, helping with nausea, insomnia and depression as well as stimulating the appetite.** **Credit to Seedsman.com ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~ The Setup ~ ~ Grown in a 2qt plastic popcorn pot filled with Mother Earth Grow 70/30 Coco/Perlite with Xtreme Gardening Mykos added. ~ Seed was germinated directly in the medium without any 'pre-soak' ~ Feeding will be by Dutch Pro Nutrients ~ 24hr light cycle while germinating ~ 20/4 light cycle after first leaves appear. ~ 4x8 Gorilla Tent ~ HLG 650R w/ 30w Supplemental UVA Bar controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. (also a HLG Blackbird for additional side lighting if necessary) ~ Supplemental co2 controlled by an AutoPilot APC 8200 co2 controller ~ AC Infinity Cloudline T6 with Controller 67 using a Terrabloom 6x24" carbon filter ~ De-Humidifier and Humidifier when needed. ~ 14k BTU IdealAir portable A/C unit plumbed into tent for temperature control. ~ BlueLab testing instruments ~ Two Hurricane 18" oscillating fans ~ Two 6" Clip-on fans ~ Two 10" floor mounted fans ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Update: 11/1- Well here we go again fam! This one's going to be super fun with one of my favorite autoflower strains from Seedsman Seeds, growing in a little 2qt. popcorn pot and entered in the 'Best Rarest & Smallest Pot by Seedsman' contest, this one's gonna be a champ! 🤩 Today I went ahead and planted a seed directly into the medium which was pre-moistened with tap water from my well. After I placed the seed about 4-5mm deep, I gently covered it with medium and poured approx. 1oz of water on it. I'll keep the pot in the tent with a Solo cup over it to retain the moisture until it sprouts... Fingers crossed! 🤞🤞 11/3- When I checked on the Zkittlez this evening I was elated to see that it had broken ground sticking up about 4-5mm from the medium! I removed the red Solo cup from her and replaced it with a clear cup that has ventilation holes in it and which I misted the inside of with water to ensure adequate humidity for the seedling. 11/4- This morning I checked on her and she's already up to about 18mm tall but has not shed her shell yet. I'll make sure that the medium stays just moist for now until she's a little older. By late in the evening she had shed her shell and her cotyledon's began opening. I noticed, after taking a close look at her, that her first tiny set of leaves were brownish looking with light colored tips. I immediately thought back to when I was pee-moistening her medium and had a 'high moment' using my other plants nutrient solution which was around 800ppm in her pot instead of the straight well water I usually use. I thought that she was getting nutrient burn causing the funky color of her first leaf set but fortunately by the end of the 20 hour light cycle, she had her first leaf set out and the were a healthy green! 11/7- Well gromies this girl has a week behind her now and I'm elated to say that she's healthy and doing marvelously! Up until now all I've done is make sure that her medium didn't dry out using straight well water ph'd to 6.1 @ 75℉. Today I went ahead and watered/fed her with 0.6L of well water with Dutch Pro Grow 'A' & 'B' added @ 10ml/g, Dutch Pro Multi Total @ 7.6ml/g, Dutch Pro Take Root @ 3.8ml/g, Dutch Pro Silica Von Liebig Special @ 1.2ml/g and Earth Juice Oily Can @ 5ml/g which was then ph'd to 6.0 @ 74℉. The Seedsman Zkittlez Auto is doing great and now is at 2 inches tall with good color. Here we go into her second week since breaking ground and the beginning of a beautiful Seedsman cultivar....follow me! 😎👍❤️ ~ Thank you from the bottom of my heart for following my grows and for all the ❤️and support you give! May all your days and grows be Blessed! 😎🙏💚
Likes
15
Share
At 112 days from seed, 70 days from when the lights were switched to 12-12, 57 days from when the first flowers were observed, I was seeing a few more amber trichomes everyday so I chopped her down. I was thrilled with the harvest. We'll see what the dry weight is but wet weight is 19.5oz ~ 554grams. Not a huge mistake but I wish I would have either used a scrog screen or done manifolding or vegged a little shorter and given more attention to guiding and managing the stretch. I think manifolding would have been best as she is a tall, stretchy plant. I didn't have the support I wish I did. The breeder says that she'll probably need some support and I think my consistency would have been better with a more uniform canopy height. Zero issues with mold, bud rot, root rot, pests, etc. Great plant!0 After letting her dry for 5 days, I weighed the harvest again and put it in jars. Buds are still sparkly and sticky and resiny. Not super compact, but my growing conditions were a little warm so I can't fault the genes. Dried weight is only 19% of wet weight which is less than I expected. She had a little more water weight than I thought when I chopped her down. I had my first sample of her. One good hit is all you'd want. I'd call the affect balanced. Great, strong hybrid. Somewhat in your head and up, but also a relaxed feeling in your body. I wouldn't want to over do it but a little is very nice! I'm glad I have almost 4 oz of it. :-)000
Likes
184
Share
#seedsman420growoff and #SeedsmanSeeds 📆 Harvest Week, 10-16 August 2024 10-12 August - Observed and let the plant grow. 13 Aug - Started 3 day RO water flush. Turned light power to 50%. 15 Aug - Harvested the plant (see pictures). 16 Aug - Began curing process. 💚 Thank you Seedsman Seeds for this opportunity to grow some new genetics from your line up. 📑 Pineapple OG performed well! Her total flowering time was 61 days, and veg time 49 days, for a total of 110 days seed to harvest! With an impressive yield to go with it. From the beginning this plant was a real pleasure to grow. Fast and even spacing between leaf set the stage for strong level branching in height. Not much training was needed during the vegetative stage other than some minor defoliation. One would think this was an F1 or Auto strain with the speed of growth, but it is not. The cross breeding in terpenes has proven to be winner as the smell is very intense with pineapple and sweet tropical scents. The buds swell solid with resins especially in the last weeks of ripening, and are snow covered with trichomes at maturity. I’m sure she would have gotten much bigger had I been set up for a larger plant. I am extremely satisfied with the results produced from these genetics. and would recommend them to anyone wanting to grow a high quality product. 🔥 Smoke Report: 25 Aug - After hanging in a closet for 8 days with RH of 50% and temperature of 70 degrees F, the product was ready for trimming. I decided to try out a large tumbler that was given to me by a good friend. Glad I did! It worked out great! Cutting my trim time down to practically nothing, and making the buds look exceptionally manicured without excessive waste, I’ll continue with this method of trimming in the future. I am pleasantly pleased with the outcome of this grow. Almost 1/2 pound of quality smoke. The buds are solid, resin filled, sticky and smell like a fruity pineapple. The high comes on kind of slow, then settles in for a smooth calming feeling, like the world just slows down a little bit. Leaving you feeling excited and relaxed, lasting for hours. Great for recreational or medicinal use. 🍶 10 Aug nutrient solution changed 🍽️ 10 Aug feeding schedule updated 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 1.0 at 74 degree F 🔆 Light power at 65%, DLI 40 canopy coverage at 12hrs 😤 Using General Hydroponics, HGC728040, Dual Diaphragm Air Pump, 320 GPH That is it for this grow. Thanks for all the looks, reads and stopping by. They have been much appreciated.
Likes
332
Share
Germination date 🌰 03/03/2021 Day 64 🌱 09/05/2021 Strain 🍁 Purple Matcha, Humboldt seed bank Nutrients 💉 Advanced nutrients PH perfect sensi grow A+B (veg) PH perfect sensi bloom A+b (flower) B-52 (through veg until week2 of flower) Voodoo juice (🖕🏻) Tarantula (🖕🏻) Piranha (🖕🏻) Sensizym (all the way through) Rhino skin (🖕🏻) add first leave for an hour Big bud coco (week2+ of flower Bud xfactor (🖕🏻) Nirvana (🖕🏻) Bud igniter (first 2weeks of flower) Overdrive (last 2weeks of flower) Flawless finish (flush week) RockHoldings Rockresinator(week2+ of flower) Vitalink calmag Set Up ⛺ amazon special 1.2m x1.2m 💡 spiderfarmer sf4000 📤📥 AC infinity 6inch 💧 10lt dehumidifier Notes🗒️✏️ Seeing slight amber heads on the bud sites so I've clearly had some heat issues over the last couple of days. Ac infinity reckons it's not getting above 25c but the thermo pro is reaching 27.5c. Weathers improving outside so may be time to purchase a small ac unit. Finally found its weak point and I do remember reading somewhere they dont like the extra heat. Lesson learned for next time I do this strain Stay turned and happy growing fam ❤️🍁🌱👍🏻
Likes
62
Share
As you can see the xs2000 from viparspectra builds some fat dense buds. They are full of plump milky trichomes. They are being flushed with ro water and will get chopped soon.
Likes
9
Share
She starting to stink! That good GG4 stank, white pistils popping up at a rapid rate now. Let's go. 5 gal pots might switch to 3? Yesssssirrr. A tiny bit of yellowing, cal mag? High 🛸 pew pew pew
Likes
3
Share
🌿Week 4: Defoliation & SCROG Setup Week 4 was all about structure and airflow. The canopy was getting bushy fast, with a ton of inner growth, so we went in for a solid defoliation session across the board. Lower fans, overlapping leaves, and shaded internodes were cleaned up to let light penetrate deeper into the canopy and reduce potential humidity traps. Right after that, we finally dropped the SCROG net, stretched out gently across the canopy to guide the branches horizontally and prep for flower stacking. Some of these phenos are already reaching for the sky, so the timing felt just right. Captured a full-time-lapse clip of the defoliation + netting process. It’s super satisfying watching the chaos turn into clean lines. Nature meets intention. Feed Bloom since 20/6 22/6 Defoliation 🌱 Plant Response: After defol, they bounced back fast. Tops are perky, leaves are praying, and stretch is continuing in a controlled way. The structure’s more open now — better airflow, better light distribution, better everything.
Likes
90
Share
Germination date 🌱 29/11/2021 Day 70 09/02/2022 Strain 🍁 SinCity seeds Frosted Biscotti (Biscotti Sundae x Whitenightmare) THC% • Unknown 💡 Mars Hydro FC-E6500 • Power draw 650W + 5% • Max coverage 5 x 5 • LED 3978 pcs high quality chips • Max Yield 2.5g / watt • Noise level 0 DB • Removable Driver & Light bars • Daisy chain • Fast cool system https://marshydroled.co.uk/ 🇬🇧 PROMO CODE • (organicnature420) DISCOUNT https://www.mars-hydro.com/ 🇺🇲 PROMO CODE • (ORG420) DISCOUNT 👍🏻 ⛺ Mars Hydro 150 x 150 x 200cm 📤📥 AC infinity 6inch 💧 10lt dehumidifier ❄️ 3.1kw air con system 💉 Nutrients Living soil (dry amendments) Grow Bloom Bloom2 MycoBoost Barley 🌱 Growing Media • Soil Notes 📝 Not as good as some of the others but no complaints. Lights working wonders and now upto %85. I will leave it there and go full power next run as I've had no problems 💚🌱 Discount codes in bio for Mars hydro
Likes
12
Share
The prefect plant if you want something fruity with a short flowering time! This plant explodes in thc and even considering she was not in optimal conditions. I had some bugs, trips to be precise, so i applied neem, but the concentration was too high so i burned some leaves and stems 🤦 Finally the yield was highly affected due to the above mentioned, still the buds are amazing, highly covered in snow, specially from the smaller clones i had, the suggestion is to use support to ensure the plant can manage the buds
Likes
22
Share
This strain is more sensitive to heat than others I've grown, but still looks fking beautiful!! Have tried a few buds after 6 days of drying and the high is sick. Will give a full review after fully drying and curing for atleast a few weeks. 🤟
Likes
12
Share
@ciansta
Follow
Germinated for 24 hours in a glass of water, 48 hours in a paper towel and then I planted them into biodegradable seedling pots. Northern Lights looking a bit ahead of the Dosidos seeds but that was expected I’ve grown Northern Lights before and they sprout real quick. One of the Dosidos’ first true leaves is looking a bit wonky but we’ll see how it goes I suppose.
Likes
11
Share
Cuttings are growing very fast, we added 2 more lights for a total of 800 W led grow light. On day 11 since have been put in the box we decided to switch to flow as we tought cuttings has reached the right dimension to fullfil the box. Still using only pH 6.5 water with no nutrients