Hello Diary. The third week of vegetation has passed and Fat Banana has entered the pre-flowering phase. The plant grew 41 cm in the first three weeks, which is one third less than its roommate Haze Berry. Fat Banana has developed dense branches with lots of leaves, now the leaves and branches are causing problems when watering. I continue to add BioBizz to each watering on a schedule for that week, and I also started adding CalMag preventively. Fat Banana has also become more thirsty, now watering is almost every two days when I prepare 6 liters of water with which I water all three plants evenly. All in all, everything is fine for now and I’m looking forward to the start of flowering. Let’s take a look at the review of the week. 09/10/2020 - Day 15. Watering. I added BioBizz as scheduled for the third week and added 1.5ml / lit CalMag preventively. p.H. I lowered the values ​​to 6.4 with Plagron’s Lemon Kick. The temperature of the water I water with is always around 18, 19 degrees. I also put in a Box and another fan. Temp / Humidity on the farm - 25.3 degrees and 48% humidity. 11/10/2020 - Day 17. Watering. This time I didn’t add BioBizz, but just put 1.5ml / lit CalMag and lowered the p.H. value at 6.4. Temp / Humidity on the farm - 25.3 degrees and 45% humidity. 13/10/2020 - Day 19. Watering. BioBizz for the third week and CalMag preventively. p.H was 6.3 Temp / Humidity on the farm - 25 degrees and 45% humidity. 15/10/2020 - Day 21. Photography, Watering and height measurement. After photographing for the end of the third week of vegetation, I measured the plants on the farm and after all watered with BioBizz and added CalMag preventively. p.H. I dropped to 6.4 Temp / Humidity on the farm - 25.2 degrees and 45% humidity. Fat Banana Auto - Day 21. - 41 cm This week I have finished the vegetation and am entering the flowering phase. For now, the plants look happy and pleased. Their conditions are pretty good and I will try to keep it that way. See you next week.

Doing amazingly! Actually started flush literally today! So stay tuned to see how chunky these flowers are going to get! They smell delicious! Candy shop in my tent with all these flavours!

May 7: could have waited another few days but want to try raised beds with a few days of cold overnight happening soon. Forecast for next two weeks looks good to go outdoors for autos soon, but first we have three days with overnight at or just below zero. After Wednesday they can likely be outside most of the time. May 10: bit of snow overnight.

Sticky beast is waiting for some good sunrays so she can break out of my garden!!😎👏👏👏 Garden is smelling real sweet too, thanks to her 😵👌 I love her structure, i have topped her, but LST was not that necessary.. only defoliation, a lil bit.. i love that bc i hate LST, (im not that good in it..😳) She turned out great, she grew open and wide.. just by herself. 😇👍(maybe also becouse i let her dance in the wind 😎 and move her around a lot) Lots of bad weather this week(cold and wet, she is in greenhouse a lot).. but luckily her buds are still healthy👌 And dont forget: FOR ALL MY GROWBRETHREN/SISTREN IS A DISCOUNT CODE: ZAMMIGD2023 happy growing for all ✊

28.8 Eight flowering week is done now and one week of flushing. Both look excellent but they'll go nine weeks. Other one maybe at day 60 because she already is pretty ripe looking. Barney's recommend was 60-70 days so I'll check at 9 weeks 63 days... I'll keep flushing and girls still swell and stack trichs nicely.👌 Not much to report.. Thank for checking in! Happy growing! 👽

Chopped on day 80, hanging in 65F and 62 H. Hoping to slow this dry down to 10 days so wish me luck.

This strain grew easily. Good quality weed. Strong smell and sugar buds.

2 strawberry banana didnt make it sadly so ive replaced with 2x fast buds - Strawberry gorilla. Hopefully they work out but will be 7-10days behind the 2 poundcake and 1 sour crinkle Update 2x strawberry gorilla have been planted into their forever home Poundcake 1 is on day 3 and Poundcake 2 and sour crinkle are day 2 😁 2x Strawberry gorilla just had their helmet taken off 😂 15/07/25 From what I can tell spiderfarmers PPFD maps are way off. Even ramping up the power to 50% at 12" has only just stopped them from reaching for the stars... I wondered why my last turned into jack and the beanstalk 😂 Its a shame because the lights promise much more than they offer. I was planning on buying a full spiderfarmer setup and godknows how many more in the future but I think they have lost me as a buyer.

Bald soweit für die ernte... Monster pflanze.. bisschen zickig zum züchten, aber genau das macht sie aus... Sobald mann ausgefunden hat wie, ist sie abnormal... Der geschmack ist einzigartig und sehr stark.. freue mir auf diese baby

The total height at harvest was 42". Measured from the top of the net pot to the tip of the cola...Almost too tall for the tent, when you add the light, distance and air filter. The wet/trimmed weight was 409g for one plant. Took about .3m2 of grow space. Super resistant to things like mites and changes in environmental conditions, and nutrient levels. Be careful at end of harvest, the buds are so fat, wet, and dense that mold/rot can quickly be a thing if not managed with humidity and airflow. I opened up the nodes a bit to help with air flow. The diameter of each main cola was 4" at time of harvest. I moved my fans around three times a day to make sure each side had some direct air for a few hours each day and kept RH under 55%. I let the cool air here at 7,000-foot elevation pour in at night and she prob got down to 52 degrees. Purples were very prominent, but I'm sure some will fade as the cure happens. I would totally grow this again.

I’ve come to the end of my grow. Big thanks to Barney’s Farm for the potent plant. I have dried the plant out for roughly 8/9 days. It has now been curing for another 5 days so far. Probs will need 2 weeks at least. I think I trimmed it too early because if you look at the pictures I left 1 or 2 buds at the bottom of the plant 🌱 They have ripen and grown much bigger in size. They also smell a lot better. I hope my next grow will be even better. Good luck everyone and thanks for taking the time to read. ✌️🏼

Hey guys, did some defoliation yesterday because it was Flower day 21. I got rid off the lower branches and flowers with little to no chance of receiving enough light. I snapped off the leaves which were looking a bit old. I’m pretty happy with the result, since it is my first grow I didn’t know how or how well it will go. After defoliating her I gave 5L with around 20ml of Hesi root complex to help her get fit after the operation. I feed her once a week with bloom nutrients 50ml / 10L. I also attached new wires to the twigs to continue with the LST and to improve light penetration. So far no problems and I’m pretty happy. Also I haven’t smoked weed for 3 Weeks now and I am excited to wait till harvest with my break. If I trust sensi seeds she needs around 50-60 days to complete flower, so let’s say we have 1/3. My SanLight evo 4-120 is running on 80% power which is 212W and I have 30-35cm distance to the canopy, depends on which buds you measure. Thanks for reading. Have a nice day

----- Week 7 ------ Still on rebound from nutrient deficiency , ( Magnesium) / Nutrient Lockout & maybe salt build up . I made too strong soil, With my additional amendments ( Which Gaia has most already ) . Basically double down on 4 of them . Working on the canopy and making sure the lower leafs are getting light , and even. It feels shes a week or two behind --------------------------------------------------------------- ----- AI Trouble Shooting ----- --------------------------------------------------------------- I use Claude AI to help with python / php programming, so I figured I'd run my soil recipe through this AI. Asked if there would be any issues, Pretty good response! Here was the response. ( I troubleshot the plant prior ) " Potential Issues: Salt Build-up: Worm castings + Bone Fish Meal together can lead to salt accumulation Watch for leaf tip burning or nutrient lockout Nutrient Overlap/Excess: Multiple calcium sources (Gypsum + Bone Fish Meal) Could potentially lock out magnesium uptake if too concentrated pH Considerations: Bone Fish Meal can lower pH over time Gypsum is pH neutral but can affect nutrient availability Deficiency Risks: Magnesium might become deficient due to high calcium levels Iron availability might be reduced due to pH fluctuations Nitrogen could become limited during heavy flowering "

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Loving this new camera quality! Really brings out the green shine. Anyways they've all been loving the feeding regimen. Two feedings a week with 2 molasses feedings in between seems to do the trick at this stage. Also wanted to mention the height is in reference to the tallest of the three BanDad's. Which is the one I topped surprisingly. For future reference, anybody following a similar formula to my grow will definitely want to top just once around week 2/3. She didn't even take a recovery period, really. Just chugged right back through, 3 days after. Now she dwarfs the other two BanDads quite immensely. Definitely been destroying my initial notion of not topping autos with this one. Cheers everyone!

This week I sprayed my plants with tweetmint. I watered them 3 times since they’ve been in the pot. They’re growing , not that fast but they’re growing.