Likes
Comments
Share
Buds so heavy the branches are flopping all over. I guess that’s one of them good problems. Hopefully the zip ties and walls keep them standing til harvest.
Likes
18
Share
Ok!!! adesso è partita bene...questa strawberry 🍓gorilla 🐵, è nata con un cotiledone che se guardate bene sembra morsicata da non so cosa😂🙈..le prime 2 foglioline sono uscite normali, la 3 foglia è uscita con una malformazione. ...adesso dal 3 nodo in su dovrebbe crescere più che bene💪💪🍓🐵
Likes
1
Share
Likes
45
Share
Hello my friends, ...April 11, 2022....Day N°30.. Beginning of the fifth week of growth for my three Feminized Bubblegum. There are fine, developing good, the topping working well. They are healthy and beautiful. www.00seeds.com www.mars-hydro.com Thank a lot for passing through here. Wish you the best with your green projects, peace. See you soon 💨💨💨
Likes
6
Share
@Saltoa
Follow
yesterday i applied a heavy defoliation and watered with increasing fertilizer
Likes
7
Share
2nd Week of Flower! I think? Looking back on my calendar and pics on my phone that we’re never uploaded, my guess is, we are on second week. These pics and video are from August 11th, day 75 post germ. It’s also very possible the two big gurls began flowering at different ends of the week. The nutrients used this week were applied once during day 76. In addition with a thick top dressing comprised of the following: [insert composition here] [Mushroom Compost as base media, dolomite lime, gypsum, muriate of potash, triple super phosphate, kelp meal, bone meal, seabird guano, Texas Greensand, black soldier fly insect frass, Earthworm Castings!, neem cake, bat guano] Stuff like the triple super phosphate and muriate of potash were used in very small amounts. But I used them to increase the density of available phosphates and more importantly for the available potash. Keeping it small because I know the microbes don’t like stuff at those density levels. Will be compensating with a little extra molasses. The weather has improved to sunny most the day with afternoon clouds breaking the hotter section, opening back up for a bright evening and sunset. The average high has been 86F during the day, while dropping to 54F during the night. The coming week is forecasted an average refreshing high of only 78F with nights not much cooler, still averaging at 54F! The increase in afternoon moisture levels is playing a huge role in this grow. Helping to maintain a better VPD for these Ladies while shortening the range of temperature flux from day and night. I know 54F sounds cold, but this is the high desert at 7,000 feet elevation. Pure Indica x Blueberry measures an impressive 49” Tall while Planet of The Grapes x Blueberry measures in at 34” Tall
Likes
6
Share
She has heavy super glue terps! She was absolutely gorgeous, especially since I tried topping her for the first time...Nervousness... But the risk definitely paid off! The scales of the dried herb is good. Especially since it's one plant.
Likes
15
Share
@Autofutur
Follow
She is short and compact.tight internodal spacing.large fan leaves. Typical indica looking plant. Cut of 2 big fan leaves and kept lst as much as possible to open her and create more colas.
Processing
Likes
2
Share
Week 2 the plants stretched so much that I ended up having to transplant them deeper into their pots
Likes
Comments
Share
Performed root washing ... a few days and this delight should be put to dry!👍👏🤭🤙😁
Likes
8
Share
@ProKush27
Follow
Over the last week I’ve continued with defoliation process and I removed downer leaves that were not developing properly. On day 78 I added support for aide branches on B and C. I started flush of plant C on day 80, so we’ll see how she looks. I keep feeding other plants but I will be starting flush soon. 😎
Likes
3
Share
Esplosioni di cime e terpeni manca sempre meno alla fine. Concimi e nutrienti usati 25 g di guaino di pipistrello 16 ml di adv nutriens 25 g di pellet a rilascio lento rqs
Likes
6
Share
@zenderman
Follow
30/4/26.day 71 from germ,today flushed with "flawless finish".
Likes
8
Share
So.... as you guys can see above i HAD to go brutal with this lady applying the "SuperCropping" technique, im not gonna lie that i was very worried since i had stress out the plant just a few day before this with heavy lollipopping and defoliation, but i had no other choice, the plant was still going up, no matter what hahah, she is a REAL BEAST, and it does not matter what i do she still want to be hugging the light hahaha, im FKD, but whatever lets see how this goes!! the recover was super fast, amazing how she just did almost not care at all with all the pinching and breaking of the stems and went right back up!! stay tuned
Likes
3
Share
@CalGonJim
Follow
4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around
Likes
80
Share
@Qlimax
Follow
Hello and we are at the end finnaly!! I harvest them on day 64!!! Harvest was amazing some flowers diffrent then others but cus of my noob box and all i am rly imprest and heppy abaut whole journey,this site helped me alooot!!!TYWM!! Buds are rly nice and they smell even better!! 😂 I was thinking of buying LED but.......i will grow indoor onley at winter and MH/HPS give alot of heat so is kinda rly nice....and i rly love how they grow this time so.....🤘 🤝For next grow i decided i will ..🤝 👉.more&sooner& etter LST then this time! 👉more def on ending. 👉Gonna buy CaMg fot sure! and mybe smth for roots/flowerig (didnt decide yet) 👉Better/stronger fans for better air flow 👉Alredy ordered magnify tool....60x 🔬zoom for 5€ from wish(with shiping)i had 32x zoom now but it wasn't enought. Still cant see tricomes clearly with 32x 👉Better reflector 👉Brought glasses so i dont destroy my eyes cus this briht light!😎 👉Ordered TDS metter In few weeks i report final results:)...... and alredy 5 neew flowers are growing 3x blackberry 2x zkittlers from 42 😎😎🤗 Eejoy life!
Likes
45
Share
@valiotoro
Follow
Very very sticky i had to change gloves every 2-3 buds!🤓 Delicious smell🤤
Likes
4
Share
@Artemis
Follow
This entire week was just rain, rain, rain. I kept the plants under the lamp. I'm really not prepared for indoor growing. But, light is light and it will work for a short time, apparently.
Likes
6
Share
Hum wondering if plant won't get to big and if my LST is wrong.