The Grow Awards 2026 🏆
Likes
Comments
Share
Primera semana de floración, se continuó con nutriente de vegetación reducido y se empezó a la vez con el de floración también reducido. - Luz: Bestva Pro 1000W / 18 h/d -FloraNova Grow G.Hydroponics: 0.4ml/l - FloraNova Bloom G. Hydroponics: 0.3 ml/l - Armour SI G. Hydroponics 0.4ml/ - Everest: 0.5 ml/l Control biológico: -Solution (bioinsecticida generalista: Beauveria, Metarhizium, Lecanicillium y Cladosporium + esencia de ajo y chile). -Acaridox (bioacaricida: Metarhizium e Hirsutella + esencia de canela) - Scamin (control escama y cochinilla) Cladosporium Herbarum
Processing
Likes
13
Share
Growing this popsicle cake definitely had its ups and downs. What started out looking like a dud of a seed turned out to be something pretty spectacular. Stacks the buds nicely to fill up the whole colas, super frosty, with an un godly stench of sweaty dirty socks. Still in the curing process but definitely has a heavy indica punch!
Likes
14
Share
@Joutu
Follow
Me encanta está planta. Su estructura y su aroma por fin empiezan a mostrar su fina resina. Un abrazo!💚🌱
Likes
78
Share
@Terp1
Follow
Moin 😎, Woche 11 ist vorbei und die Damen gehen so langsam in Rente. Und zumindest die Papaya sieht auch schon so aus. 👻 Ich reduziere jetzt schrittweise die Wasserzufuhr und die Lichtstärke. Hatte bis jetzt so um die 1000 PPFD in der Mitte und 850 an den Rändern und ich gehe zurück bis auf 600 PPFD in den nächsten 10 Tagen. Weiß nicht, ob sie noch viel länger brauchen werden. Trichome sind 70% milchig und 30% klar. Auf den Zuckerblättern schon das eine oder andere Bernsteinfarbene. Ich habe mir einen 150L Weinkühlschrank zugelegt (siehe Video) den versorge ich erstmal provisorisch mit einer Umluft und eventuell schon einer RH gesteuerten Abluft und dann werde ich Buds zum Testen schonmal reinlegen. Ich möchte Next Level Qualität und beim Grow kann ich kaum noch was rausholen. Jetzt muss die Trocknung optimiert werden. Als Tipp kann ich euch schonmal mitgeben, dass ihr am besten beim Trocknen einen VPD von 0.9kPa aufrecht erhaltet. Egal wie die Temperaturen erstmal sind. Der VPD ist auch bei der Trocknung verdammt wichtig. Vielen Dank für euren Besuch und bis demnächst (und bald zur Ernte) Terp 💪👽
Likes
81
Share
Se empezaron a poner naranja la mayoría de los pistilos, esperaba que se enrosquen antes de que oxidaran pero no sucedió. De ahora en más solo le voy a dar agua para que valla comiendo todo lo que quedo en el sustrato. Voy a priorizar un mejor sabor en esta variedad antes que la cantidad. 03/05 se riega con 2,5 litros de agua + cal mag PH:5.7 EC:0.9 drenaje PH:6.5 EC:2.5 08/05 Empieza el lavado de raices con abundante agua. aun tiene pelitos parados en las puntas. calculo que en 2 o 3 semanas la cosecho.
Likes
28
Share
Hi, Final few days before harvest with wedding cheesecake. Cannot wait. Will update soon. Grape gushers still has a few weeks left before she is ready. Will be back to update.
Likes
2
Share
The aroma is citrusy with spicy notes, and I absolutely love the smell.
Likes
9
Share
those nugs are getting bigger and bigger each day. They‘re just soaking up the fertilzers. We have to water them every second day 2l per plant
Likes
2
Share
@Gromie
Follow
FLUSH WEEK! Since it's coco coir, I made sure the water was pH to 5.87-5.96 & continued watering every other day.
Likes
2
Share
@Cornfed
Follow
This week I added a new controller to handle up to 8 functions. I installed a new heater, my old humidifier and some LED strips to the controller. Targeting a VPD at 1.0 day and night. Trying to keep the nutrient ppm under 900 and ph at 6.0 in the reservoirs. Ordered a second ph pen because I don’t trust my readings. Will be here by Thursday. Friday: Checked the ppm in the reservoirs and it’s at 1,000. Added more RO water with extra nitrogen to bring the ppm level down to 925. Saturday: I installed an updated AC Infinity controller 69 Pro Plus (controls 8 pieces of equipment) which allowed me to add a humidifier, corner LEDs and a heater to the controller. Overall I’m extremely impressed with this AC Infinity equipment. My VPD is within the range I want to achieve (.8-1.1). I programmed it to maintain 78 degrees and 67% humidity during the day, 73 degrees and 63% humidity at night. Charts posted also show the impact of an open tent compared to the closed environment. The heater is constantly pushing fresh air into the tent, so I don’t need to cycle the exhaust fan often. Rewired the tent again and moved the controller later that night. I mounted the controller on the wall. Added Mars Hydro UV/IR lighting to fill out all 8 slots on the controller. Sunday: I checked the ph in the reservoirs (6.8….i had filled it with 6.0 ph) and the ppm (1200 ppm…I had filled it with 900). So evaporation and possibly a mismeasurement of ph. I topped ff reservoirs with slightly stronger nutes and adjusted ph to 5.8 in the reservoirs. Poor magnesium absorption could be driving some leaf yellowing. Effective tomorrow, I’m switching over to Heads Formula which consistently feeds GH Flora series nutes at Micro (6ml/g), Bloom (9ml/g) and cal mag (3ml/g). Turned on the UV/IR lights for 3 minutes every 8 hours. I’m easing the plants up to 5 minutes every 6 hours which will provide the recommended 20 minutes of IR per day. This will help the plants stretch a little more. Monday: checked ph and ppm in reservoirs. 6.1ph and 880ppm. VPD remains stable except when I open the tent. Tuesday: checked ph (6.4) and ppm (880) in reservoirs. Added .5ml of ph down to two reservoirs. Still see slight yellowing between the veins but it’s not getting worse (might be improving). Adjusting ph down to 6.0 target might have solved this. The plants grew by 1-2” last night…..is the infrared light working already? Decided to mix up fresh nutes for the reservoirs following Heads formula. 6ml Micro and 9ml Bloom per gallon of RO water. Added 5 ml of CalMag too. Ending ppm was 1080 which is too high, so I diluted down to 880 with RO water. 6.0 ph. Wednesday: plants grew another .75 inches last night. I topped above the 5th node. Thursday: added RO water with heavy cal mag to reservoirs to increase amount of CalMag available.
Likes
4
Share
Somehow I miscalculated the days and started week 6 prematurely. I will just continue here thru to week 7 Day 32 From Seed NYD#2 Started LST. Pot was light, watered at 6.3 including Fish Sh!t. NYD#3 The pony tail backfired. The main is mangled. Despite small nodes, I started LST and watered at 6.3 including Fish Sh!t. Day 33 From Seed Did some research and found out the ponytail should only be used during the light cycle and removed for the dark period. I left it on, which caused the ugly. Lesson learned! Day34 Adjusted and added LST. Watered #2 at 6.5. #3 was still heavy, no water needed. Day 37 Watered, adjusted LST Day 39 From Seed Watered, adjusted LST. Found a bug that isn't a fungus gnats (NYD#3). Inspected both plants for more. Did a neem oil top drench and added Vicks Vapor Rub to the pot rims (bug deterrent). So raised light roughly 4 inches. Day 41 Light watering, adjusted LST ties, top drenched with Neem Oil. Added a few ounces of peroxide to the humidifier. They'll both need a top dress soon.
Processing
Likes
12
Share
@Buurman
Follow
It was a heavy week! Topped and FIMmed my O.G’s, I have no clue if I even did it right since I just topped of the newest node. Gorilla’s seem to be taking a little longer, they are super nice and dense little bushes! Nice dark green tho! 👨‍🌾🏻 Dropped the light on them a few times and burned off a few leaves had to cut off pretty much 25% off a monkey but doesn’t seem to affect it at all.. 1 OG has clear ladyparts sticking out all over, it’s also by far the best grower out of the 8, hope the rest of the plants show some signs soon 😏 I’m impatient. * End of the week update Did lst and it looks like I stepped on my plants.. they are doing fine no worries it just looks terrible 🐘 The gorilla’s are looking beautiful! Dark green and lush! What do you guys think about the OG that’s already getting so many pistons did it start flowering already??
Likes
46
Share
@Wastent91
Follow
Well well ... The girl Is developer fat buds ,the smell are impressive ,She Is very Stick resin full cover!!! Maybe this Is a ultimate week? I think so.. would yuo think guys?? Ringrazio Mars hydro e Sweet seeds x averlo reso possibile !
Likes
Comments
Share
@Calo
Follow
We're starting to get into the thick of things. The plants have almost reached their full height and are starting to fill with gorgeous buds along all the branches. Resin production has finally begun, and the plants are starting to smell like candy🤩. At this stage, I've started defoliating and cleaning the bottom of the plant, removing all the small buds that aren't getting enough light. I'm continuing to water with microorganism-enriched water, about 25 liters every 5 days. They're drinking a lot at this stage, so I've increased the watering frequency.
Likes
13
Share
acho que ainda consegui produzir uns tricomas com as correções da água, mas como o estágio da floração já estava bem avançado, as folhas começaram a descolorir muito cedo, tive que colher 3 plantas precocemente, as outras 3 menos vou tentar seguir mais 2 semanas, não estão mostrando tricomas Ambar ainda!