The Grow Awards 2026 🏆
Likes
Comments
Share
@KivzBudz
Follow
Letzte Woche Samstag habe ich das Licht auf 12-12 umgestellt also startete die Woche am Montag mit dem dritten Tag der Blütephase. Läuft bis jetzt immer noch alles sehr gut, hoffen wir es bleibt dabei. Ende der Woche erstes Video hinzugefügt. :)
Likes
20
Share
We are in Flush !! Was giving them GH Flora series + rapid start + cal mag
Likes
54
Share
@RastaGrow
Follow
Начало 4 недели цветения , на 18 день сделал дефоляцию 707 перенёс всё бес стреса ;) ну что скажите друзья.?
Likes
28
Share
So this was quite the week...I was looking over our set up, and making sure Grandma has everything she needs when she says "it seems to me that we need a vegetation cabinet." Turns out she had all the supplies too. Cracked me up...so I ended up building a nice little veg / drying cabinet. You'll see it in the second Meph run diary, was too busy to get some shots today. 😅 She doubled in size from last week, super happy with the progress. She's under a combo of flouro and LED in the new cabinet and LOVING it. Started ramping in nutrients slow and steady, keeping the c02 around 600-800ppm while I finish up the environmental control in the new cabinet. I realized that Mephy, might be a flight risk...so I made her a pen. 😂 ...also removed any confusion on her breed. Yeah, I nerded out a little. #prusagang #piggydankfarms Hope everyone had a great week, and all the competition ladies are stellar! Until next week...time to go play on the farm. ✌️🌱
Likes
8
Share
Sexta semana, fiz um flush nos vasos mais queimados, as outras plantas apresentam deficiência de magnésio também, segue sexta semana de flora e apesar dos problemas as flores tão bem resinadas, vou aplicar flowermind essa semana e ver se melhora. Obrigado por
Likes
30
Share
It’s been a strange week this week, few ups and downs, happy with the leaf development and general health of the girls but i think they might be lacking a bit of height and length between the nodes so I’ve been advised to not increase my wattage just yet and to increase the distance from light. I’ve also in the last couple of days moved them to the outer side of the tent, not like I’m lacking the space lol, in hope that this will encourage them to stretch up and out in search for more light; fingers crossed its a winning combo. Still only feeding water when soils dried up. Will deffo put a couple more plants in next time.
Likes
16
Share
@MrWolfe
Follow
Everything went well, make sure to keep prefilters clean on water lines, doh.
Likes
12
Share
@gr3g4l
Follow
Sigo añadiendo humedad pulverizando con agua destilada, tres o 4 vecs al dia.
Likes
18
Share
@TVance32
Follow
I was super anxious to get to grow my own weed. Came home to 5 of 6 sprouted. It took the other one nearly a week to come up.
Likes
52
Share
I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"
Likes
14
Share
@simps
Follow
This strain seriously surpassed my expectations this plant grew and grew and grew huge yields big chunky buds of some sticky dank goodness the grow went great no real problems very strong strain nothing slows this plants down the weather and my errors beat the shit out of it and it never missed a beat it just kept on growing this was one of the easiest cannabis strains I’ve ever grown it’s resistance to mold and mildew and stress was impressive if grown outdoor i would highly recommend that you take extra steps to Secure the tall long branch’s that’s grow big heavy buds this plant is definitely a big yielding plant and needs extra security I’m more the happy of the results hope everyone in joyed the diaries as much as I did making it I’ve been growing for many years now and had fun doing it but it wasn’t until I found grow diaries and all the benefits of grow diaries I found how amazing growing really can be I’ve learned so much and met so many great people on GD my experience with GD has been amazing Blue Gelato 41 Barney’s farm thanks guys for the seeds and great genetics I truly appreciate it I had a good time with this one 😁✌️🏻🇺🇸
Likes
6
Share
@Saltoa
Follow
hello again everyone, I'm in my mastery period now. Let the lights turn on, let the show begin. The target is 4x autoflower 400 grams.200 watt LED extra additional light will be added in the flower. Are you ready to go to the destination with me?
Likes
11
Share
I sorry for not uploading photos, I've been very busy and without having time to appreciate my girls, I'll upload pictures soon before finishing this week. change the topbloom for bloombastic starting with 1ml
Likes
20
Share
Removed all the new side shoots and the first set of fanleaves. Did this because I want the plant to focus all of its energy on the main stem. I dont need any new side shoots. I thought that this weekend I would flip them in to flower. But I'm going to wait some more. I want to see more height in the plants and I think that after this defoliation that hight will come quick😁🚀 PATIENCE IS KEY! On day 75 I changed the light colour from blue to red to see if this can promote some stretch before changing the lightcycle to flowering. ‼️I did not change the hours of light‼️ On day 76 it seems like there has definitely been some kind of reaction from the plants overnight. They seem to have stretched a little bit. I'll keep a close eye on em these coming days.
Likes
4
Share
@CalGonJim
Follow
MONDAY 5/19 12AM Doing great, have to separate Cory and Trevor this week. 1130 pm .🚨🚨🚨.STONED GENIE order..I got one broken 64 dollar land the 12 inch 19 dollar black double percolator was TOTAL GARBAGE!!!!! it had a fake 10 star review.... at least I got 2 4 inch down stems for 117 .....complete WASTE of money, should have just thrown the money in the garbage.......... so pissed....🚨🚨🚨 5/24 3 pm new light lots of godamned work why do I do this to myself??? 330pm what. a nightmare, I put the extra red and blue 20 cheap lights with this monster light, nice balance of color with the blue. I love this light, Mars Hydro...why do you do this to me. Totally worth it, best lights on the planet, so far. 5/25 230am NEW DESIGN NIGHT. USB FANS -- Small usb fans at the end of ducting are effective intake air filters. HOWEVER the fans are cumbersome the wires are a pan in the as. design 2 part clip gravity 4 inch wire. twists thru fan . ONE tlong up the tube for balance other to CLIP on to duct. 3am clips are good new designs emerging. fasting all night so I can work and get new ideas. fans are a go, we have a new design using clips, no external wires. the load bearing usb wire is safe, not load bearing to the connections just the cable, its perfect.. Mexicans and jew & white trash cops and their arzonz fed family and judges have been committing unimaginable property and financial crimes against me. If I am suicided. it was them. I am ready to die, unafraid of every one of you fucking bastard traitors and I mean it.
Likes
42
Share
@MrJoint
Follow
☀️LST for better lighting on smaller branches. ✌️🎃Thank you for checking my cultivation.
Processing
Likes
6
Share
Just got a new 600w mh/hps light for now it’s in my current setup with my 250 n it’s dimmed to 50%, only reason I mention is b/c the plants seem to be loving it!! They’re 12 days old from seed, still just ph’d water for them! So far so good :P
Likes
7
Share
This ladies look absolutely gorgeous and super strong, they're gonna be flipped into flower tomorrow on February 15th when they'll hit the 30th day since they were planted and the first day of flower! As said, I have flipped this ladies into flower on February 15th so now I think we're gonna see a beautiful stretch specially on this 2 plants which are the biggest one in the tent, very nice genetic, cannot wait to see their performance ❤️💛💚👨‍🌾 stay tuned everybody! This is gonna be a beautiful run! ✌️
Likes
20
Share
Today i cut down the males. they have pollinted the whole area, the rest of the is into the refrigerator they had lots of pollenpowder its just everywhere in the roo--- means i have to do a very good cleaning
Likes
6
Share
So this week has really absolutely crawled by from my perspective, I imagine it is common with growing that the closer you get to harvest the further away it seems. Anyway I am a bit worried about the middle sized plant - she has a lot more yellowing of fan leaves from the inside out. My reaction to this was to flush her with clean water, my thinking is that everything was fine before I started feeding, and perhaps I didn't mix properly and the soluble stuff was unevenly distributed. That was yesterday (week 6 day 4) It's too soon to tell if this has helped, fingers crossed it doesn't begin to affect other leaves. Despite this being only 5 days into week 6, there have already been fairly drastic changes. Some of the buds are starting to fatten more, and I'd say we're at about 15% pistils amber now, the smell has noticeably increased day by day. It's really beautiful to look the plants in the dark with a flashlight or phone light, the way the light bounces off the frosting of trichomes, as if someone had sneaked in the middle of the night and misted my plants with a million tiny diamonds. I think I will stop feeding the middle plant now and water only (unless it gets worse). The other two I will continue to feed until the end of this week. At the rate of accelerated change I suspect harvest time may not be too long past the end of next week. It's a shame they don't have much more time to grow but at least what small quantity does come from them, I am determined it is harvested at the right time. At the end of week six I have watered only as I now think these plants are maybe 7-12 days away from harvest.