german F1 Runtz,GG#4,Apple Fritter autoflower
An Tag 94 werden Apple Fritter und Runtz F1 geschnitten und geernet. GG#4 wächst weiter vor sich hin.
1/21 Magic Melon / Super Silver Haze
DRO420
@DRO420
Follow
2nd trellis net up , scog is spread nicely. Switching to Bloom formula . Defoliated everything below the first net. Started 12 / 12 light cycle
How to Auto Colorado Cookies
Week 5 : Auto Colorado in Vertafort Great week of growth, filling out the canopy nicely by now ! seeing some promising side shoots, not seeing any excess or lack of nutrients - yet ! sprayed with micro and kelp twice a week , keeping VPD in the green zone to great effect. got watered with co2 twice and got watered once with beneficials and micro. I might have messed uo a bit on the pH watering the last time, but only time will tell. Hopefully the soil microbes etc will buffer it out without any significant pH fluctuations. just trying to follow their growth with some LST and raising the light every day or couple of days this week, keeping the distance constant and hopefully keeping the correct distance. I'm not planning a feed for a couple of weeks at least. Let's see how the buds develop first ! Any comments or constructive suggestions, fire away ! 🚀
Godzilla aint got ish on this
She's comming along just nicely nice tall branches with stacked bud sites who knew I'd make it dis far its alot of work trial and error it's like a full time job tending to my girls I defol her and the green crack better air flow. And light penetration
Kukulkan (Pyramid Photo Fem) - Spring/23
56 dias y por lo más obvio cambio de ciclos a 12/12 y en el mando de las flores estaremos. El vegetativo ha sido equilibrado y sostenible y sin espacio a errores y overfert.
Jamaican Dream
Kakui
@Kakui
Follow
Dia 1 de vegetación Veg1, cuando empiezan a crecer las primeras hojas de mas de un dedo/puntas considero que han dejado de ser plantulas, y han comenzado la vegetación. Entonces, les he dado su primer alimento con nutrientes muy suaves(micro, grow y bloom) en una EC de 0.5, con pH de 6.2, ademas de seguir inoculando la tierra y raices que vienen desarrollando con voodoo juice, tarantula y piranha, con 1/2 de fuerza. Veg2, riego con 0.3 EC y pH 6.1, desde el primer riego están creciendo más rápido. Veg3, riego con 0.6 EC y pH 6.0, primer riego con suficiente agua para obtener drenaje, el drenaje midió 1.2 EC y 6.5 pH, todo ok. Veg4, nada hoy. Veg5, riego con 1.2 EC y pH 6.2, se usó Sensi CalMag en este riego @2ml/litro por un poco de amarillo en el nuevo crecimiento, B-52 también. Veg6, siguen creciendo bien, al parecer se corrigió lo amarillo en las hojas. Veg7, riego con 0.7 EC y 6.0 pH, drenaje de 1.1 EC (ok) y 6.6 pH (un poco alto), siguientes riegos serán con pH 5.8. Subí la luz y bajé su intensidad para que las plantas estiren un poco antes del transplante, las raíces de la más pequeña estaban ok, la más pequeña fue sacrificada, ya van quedando 11 de las 9 plantas finales. Ahora a esperar que se desarrollen suficiente(3-4 sets de hojas verdaderas) para hacer transplante a la maceta definitiva de 18 litros.
Bertha - Big Bang Auto [G2]
Bertha is the weakest of my six plants. Final LST done day 36. Day 37: More of the same. Bertha's days are numbered. Day 39: I've just about had enough. This plant has been utterly disappointing. Day 40: Almost pulled her yesterday. However until or unless I desperately need the space I've decided to let her trundle along. I think <10g is the potential yield at this point. However I've been surprised before. In my first grow I had bare sticks that yielded 60 and 70g dry so who knows? Day 41: Slight smell. Smells good... Bertha has a reprieve. Day 42: End of the week for tiny Bertha she's fully flowering for sure but not much is happening. I might drop down to weekly updates for this lady, I am less and less interested in her. Looking back on this grow, I predicted in week 1 (day 7) that she would be stunted, so I do not know why I have allowed myself any anxiety around this grow. The only reason that I had some encouragement was because Karen recovered so well, but I did not damage Karen's roots on day 7... really of all the various mistakes in this grow, that was the one that was most impactful. With that said, I do think I was sent a runty little seed. Anyway, I am calm about Bertha now... she will do what she will do. My only slight irritation is that she is in a 40l pot and she would probably be fine in a 10l pot. I have space for 3 more big pots... I have two Auto Purple OG Punch germinating (fingers crossed), and they will get a pot each and the final pot will contain some new F1 seeds from Royal Queen Seeds. So Bertha is safe, I am already growing more plants than I planned to and I have to stop somewhere or I will end up with plants coming out of my ears.
Fast Buds Banana Purple Punch Auto
LSchnabel
@LSchnabel
Follow
This plant is really starting to pack on the weight now. Buds are getting dense and absolutely covered in frost. The smell is phenomenal and very very strong now. I had to take out a few fan leaves that started to cover up some bud. Doesn’t look like this one will be too hard to trim after the dry. Light is sitting around 950 PPFD so she is getting absolutely blasted to the max without adding in CO2. No signs of stress ever in this plant. I’m guessing roughly 1-2 weeks before she gets cut. Will start checking at the end of this week. Next feed will be just CalMag and Silica.
AutoBlueberry breed by #DivineSeeds
AutoFlowers at 9 weeks of Bloom, Finishing out Great and Glorious as All get Out, 1st week of Veg Update for my #DivineSeeds #AutoBlueberry and these other Outstanding Genetics! Everything looks Gorgeously Great and looking Beautifully Grown at their 9th Week of Flower! Veg Update on #DivineSeeds #AutoBlueberry #NukeHeads #PurpleBlueberryMuffinCherries-Fem #BubbaKush-Fem and #BlueberryDiesel-Fem breed by Broski #Soluna668 #NoGreedSeeds 5th Feed of #HumboldtCountysOwn #AutoBlueberry Origin:Afghani/Thai Type:50% Indica/ 40% Sativa/ 10% Ruderalis Flowering:56 days THC:22% Harvest:400-550 g/m2 Height:110-150 cm #AutoWhiteRussian and #AutoMontreal *Fems* breed by Team #DivineSeeds #DivineSeedsSquad #DivineSeedsBreedingCompany Looking Magnificent and Amazingly Great in thier 9th week of Flowers! Thier Growing under the #Growatt600w and in my #TopoLite 24×24×48 Grow Tent! I'm also using #TNBNaturals #TheEnhancer Co2 Despersal Canister and using thier Ph⬆️⬇️ for my Decolinated Tap Water! #AutoWhiteRussian breed by Outstandingly Awesome Team #DivineSeeds #DivineSeedsSquad #DivineSeedsBreedingCompany Yo!!! This Lil Beauty popped open in under between 16-18 hours of Germination using this Wet Papertowel Method, this New Heat Mat, Baked potato ToGo Container and Regular Tap Water Helped Tremendously! Heck Yeah Growmies and Growmets!!! Let's Grow!!! DivineSeeds: #AutoWhiteRussian Origin:Afghanistan Type:Indica/ Sativa/ Ruderalis Flowering:65 days THC:24 % Harvest:400-600 g/m2 Height:100-150 cm #AutoMontreal breed by Top of The Line Team #DivineSeeds #DivineSeedsSquad #DivineSeedsBreedingCompany Yo!!! This Lil Beautiful Bean Popped under between 20 hours of Germination using this Wet Papertowel Method, this New Heat Mat, Baked potato ToGo Container and Regular Tap Water Helped Tremendously! Heck Yeah Growmies and Growmets!!! Let's Grow!!! DivineSeeds: #AutoMontreal Origin:Canada Type:50% Indica/ 40% Sativa/ 10% Ruderalis Flowering:65 Days THC:23% Harvest:550-750 g/m2 Height:120-160 cm https://divineseeds.net/ https://instagram.com/divine.seeds?igshid=osxe2v7en33v HumboldtCounty'sOwn: Email: [email protected] Phone: (707) 725-4119 Toll free: (866) 872-9434 Humboldt Bottling Po Box 429 · Fortuna, CA 95540 HumboldtCounty'sOwn Website Link: https://humboldtcountysown.com/ HumboldtCounty'sOwn Instagram Link: https://instagram.com/humboldtcountysown?igshid=1qj809qkkwych I love and Appreciate Everyone!!! Thanks Again Teams! Cheers Famz!!! Much Props and Much Topz!💯
SHERBERT QUEEN AUTOFLOWER
All in all this was an amazing strain to grow and looks and smells insanely delicious 😋 i cannot wait for her to cure up so i can get a proper session in!!!
Weeding Cheesecake  FF@420FB
WhiteEdge
@WhiteEdge
Follow
12.03.2024 Continue into week two. Target EC is the same for this week Girls looking great. One girl fall into bucket! That lid is not cut with precision😏 Put some plastic to hold till now Clean tanks and filters with h2o2+vinegar acid +bleach Replace all filters Mix new batch with 2ml AN connoisseur AB + Big Bud Powder + Silica - total 20l @ Donne one pass off long misting 2m 700 PPFD @ center, VPD 1.0, RH 53-56% day, RH 45-48% night, Temp Night-20c, Day-25/26c, Leaf temperature 23c, Light distance 60-65cm, CO2 750+ppm 540w@60cm distance NT-Nutrient Tank - PH -5.9, EC -1.15, Temp-21c 13.03.2024 Top up tank with 10l off 1.2EC solution - 2ml AN Connoisseur A+B + 3g Big Bud @ 18l (1.16EC) Replace all filters Before top up, nutrient solution in tank was 0.84, after adding 1.2EC new mix is 1.03 PH is slightly rising, normal when EC is drooping Girls grow nicely, no deficiencies, this week is start off stretchy faze. Remove some big and bottom levees PAR 800 PPFD, VPD 1.0-1.1, RH 50-54%, Temp Night-21-22c, Day-25/26c, Leaf temperature 23c, Light distance 60cm, CO2 750+ppm 580w@60cm distance 50s ON time 20min OFF time Day Time 50s Off time 30min OFF time Night Time NT-Nutrient Tank - PH -5.92-5.99, EC -0.89-1.0, Temp-20-22c 14.03.2024 Position TrolMaster Tent-X Box on tent and connect to internet. Temperature ,Light and humidity sensor is great, I lake that all sensors and connector boxes are on RJ connectors Great and fast install, registration and connections off all cables, censors and light! Like ability to expand system with Aqua-X and Hydro-X for irrigation ,PH/ EC/Temp monitoring off nutrient tank Controlling solenoid valves and pump will be SUPERB!!! Recycling type off timer are great for Aero misting! With Inkbird equipment i have issues that all connections are permanent and if you have longer cables....😡 HLG Scorpion Diablo LED light is connect via LMA-14 light adapter ! Wow i can control dimming and timing off my light via Wi-Fi😀😊😎👏🙏🙌 PAR map 800max/600min PPFD, VPD 1.0-1.1, RH 50-54%, Temp Night-21-22c, Day-25/26c, Leaf temperature 23c, Light distance 60cm, CO2 750+ppm HLG Scorpion Diablo@83% 580w@60cm distance PAR 800 PPFD, VPD 1.0-1.1, RH 50-54%, Temp Night-21-22c, Day-25/26c, Leaf temperature 23c, Light distance 60cm, CO2 750+ppm 580w@60cm distance 50s ON time 20min OFF time Day Time 50s Off time 30min OFF time Night Time NT-Nutrient Tank - PH -5.95-5.99, EC -0.89-1.1, Temp-20-22c 16.03.2024 Top up tank with 15l off 1.2EC solution - 2ml AN Connoisseur A+B + 3g Big Bud @ 18l (1.16EC) Replace all filters, still everything in pristine condition after every changing, nutrient solution in tank looking and smell fresh and clean. Reducing humidity in night time below 50% , humidifier rise temperature to 22-23c at night Day RH is 53%, in first two hours keeping temps and humidity lower to reduce deferential form night time to 1-2c Don't want to have more than 10-15cm off stretch in next week Girls drink more water and nutrients every day, think around 10-12l per day Managing EC strength with adding slightly higher nutrients solution when top up tank. Overall its around 0.9-1.0EC for most of the time PH is stabile , slowly rise in small increments. Need to adjust @ 6.2 to 5.9 every two-three days. Probably i will leave it to swing even more. Diablo is at 80% power @ 45-55cm from top canopy, 900+PPFD in center, lowest corners get 650+ PAR map 920max/650min PPFD, VPD -1.1, DRH 50-54%, NRH48-50%, Temp Night-21-22c, Temp Day-25/26c, Leaf temperature 23c, Light distance 45cm, CO2 750+ppm HLG Scorpion Diablo@80% 580w@45cm distance 50s ON time 20min OFF time Day Time 50s Off time 30min OFF time Night Time NT-Nutrient Tank - PH -5.95-5.99, EC -0.89-1.1, Temp-20-22c 17.03.2024 Top up tank with 10l - 1.2EC solution - 1.8ml AN Connoisseur A+B + 3g Big Bud @ 18l (1.16EC) Replace all filters, install one new. Total 5 mash filters + 2 disc filters Remove some large fan leaves from all girls. Nothing crazy. Next week is final BIG defoliation and pruning Clean room benches a little bit after defoliation. Whole week all girls are doing great , no sign off any kind off stress or deficiencies. Superb fast growth. Stretching is more apparent in the end off this week. Next week is going to be madness! 18.03.2024 Raise light 10cm , adjusting to canopy level.. HLG Scorpion Diablo@83%, Set sunrise/sunset dimming @ 30min - TrolMaster Tent-X PAR map 890max/650min PPFD, VPD -1.1, DRH 50-54%, NRH48-50%, NT-21-22c, DT-25/26c, Leaf temperature 23c, Light distance 45cm, CO2 750+ppm Week 2 off Flowering in Summary 100l off RO water 190ml+190ml AN connoisseur A+B, 15g Big Bud Powder 70kW electricity in total for light, Pumps and AC Infinity Fans. 58kW for Light + 8kW Dehumidification + AC Infinity ventilation Week start @ 1.14EC, nutrient strength. Strength dropping every day by 0.1-0.2. Topping up tank with 1.2EC solution bring back strength to 0.9-1.0EC Start using AN Big Bud powder for day two off this week. For next slowly reducing Nitrogen and add more Big Bud. Next week start @ 1.2EC Girls look superb all time, Purple Lemonade is huge , all three girls! Flowering going nicely, obvious sign off formation off bud sites, pistils have shown an all girls. PH was stabile and move from 5.85 min to 6.2 max. Swing all week without chasing perfect number. Light distance start at 65cm from canopy finish week at 45-50cm , PPFD levels around 800-940 in center, trough whole week Temperature vary slightly from 23c at start off day to 26c max at some points. AC Infinity T6 extracting fan program in AUTO to kick in @ 26c Night temps around 21-23c, dehumidifier start to work at night time to bring down humidity, trying also to minimize Day/Night temperature differential for this week also Continue in next week at same environment settings and light strength.
Dutch passion auto melonade runtz
I don't think I got as much weed as I did last time I grew this strain but still very happy with the outcome
Fullgas | GHSC (Buddie)
Das Outdoor Projekt hat gestartet! Ich habe das erste mal probiert Stecklinge zu ziehen und es hat wunderbar geklappt. - 5 / 4 gewurzelt - mit Clonex angezogen - 10 Tage bis zur ersten Wurzel - Am 22 Tag verschickt - 4 Stecklinge auf 2 Personen aufgeteilt - Anzucht im Zelt - Nach den Eisheiligen geht es nach draußen Das ganze wird ein Outdoor Projekt was ich parallel mit meinen Buddie zusammen durchführen werde.
Blue Zushi S1
Run it back
She's not as big as last time, I think I didn't catch it with the nitrogen soon enough.
Pure Kush - First Indoor Grow
Getting near the end now. Plants are smelling magnificent! I think it'll be two more weeks until harvest. Fingers crossed the buds continue to gain weight. I'll be fully stoked if I get an ounce of nice flower off each plant.
8set Mainline in Auto Pot - Fast Buds Tropicana Cookies FF
Veg Week 5 Day 35 to 41 - 3/25 to 3/31 This week is primarily test training recovery. Seeing each recent topping was at the 3 node point I topped again. Follow up of the cola breaks was nice for all but 1, The worst break (the one with tape over it) actually recovered very well, I see no future issues from that branch other than monitor for weight tears. The next worse break on the other plant wasnt so fortunate. While it started out okay, it also kept ripping under its own weight as it grew topping wasnt only beneficial, it was the only thing that allowed this branch to survive past the day (lesson here is to make sure all breaks are back supported early while they recover at least) I think this branch may need to be supported for the entire grow, and the amount of recovery time is possibly past the point of which I would want to see in a normal grow since it may not produce nearly as well as the other colas. The lighter break on each plant look to have taken advantage of the damage and produces giant knuckles of cured hardwood at the breaks. This is exactly the kind of recovery I want to see since all future water ways will pass these points and the branch will still be strong enough to support future weight of giant flowers. Feed this week was again an auto pot reservoir feed at 300ppm total before add-ins. I used 300ppm Veg concentrate mix (recipe week 2) and NO Bloom concentrate mix (just showing the recipe in week 5- I am adding it in week 6). However, I also added 1ml/gal of CaliMagic (General Hydroponics 1-0-0) and ph balance this week was for 6.0 Next week I plan to top cut the branches again and change out the feeds with 350ppm at 6.0ph
The White Sweet Candy OG / SSSC
Moin, Seit nun 5 Tagen befindet sich die White Sweet Candy OG in der Blüte und alles verläuft sehr entspannt. Langsam beginnt die Pflanze sich etwas zu stretchen ist dabei aber deutlich weniger aggressiv als so manch andere Sorte. Die Sorte macht auf mich einen wirklich sehr guten Eindruck, bisher gab es kein einziges Problem, die Internodienabstände finde ich sehr gut und die Blätter werden wirklich riesig und alle Triebe wirklich sehr stabil und die Pflanze hat einfach Bock zu wachsen! Mittlerweile ist Die Tropfbewässerung auch installiert und übernimmt dir Bewässerungssystem, gegossen wird dabei 3x täglich, wobei nur am Tag der erste Bewässerungszyklus mit Drain gegossen wird. Sobald der Stretch durch ist kommt zusätzlich eine kleine Intercanopy-LED zum Einsatz, sodass hoffentlich alle Blüten Licht abbekommen. Die zusätzlichen 30 W der Internopy-LED wird von der oberen LED Leistung abgezogen sodass statt wie sonst 130 W von oben nun 100 W von oben und 30 W von den Seiten auf die Pflanzen gegeben wird mal sehen wie das Endergebnis aussieht. 😄 Bisher habe ich den Dünger auch noch nicht auf den Blüte Dünger umgestellt um die am Anfang der Blüte notwendige Stickstoffzufuhr weiterhin hoch zu halten, ab kommender Woche bzw ab der nächsten Tank füllung kommt dann der Blüte Dünger zu Einsatz. Hey, The White Sweet Candy OG has been flowering for 5 days now, and everything is going very smoothly. The plant is slowly starting to stretch a bit, but it’s doing so much less aggressively than some other strains. This strain is making a really good impression on me so far, there hasn’t been a single problem. I think the internode spacing is great, the leaves are getting really huge, all the shoots are very sturdy, and the plant is just eager to grow! The drip irrigation system is now installed and handling the watering; it’s watered three times a day, though the first watering cycle is done with drain only on the day itself. Once the stretch phase is over, I’ll also be adding a small intercanopy LED, so hopefully all the flowers will get some light. The additional 30 W from the intercanopy LED will be deducted from the upper LED output, so instead of the usual 130 W from above, the plants will now receive 100 W from above and 30 W from the sides. Let’s see how the final result turns out. 😄 So far, I haven’t switched to the bloom fertilizer yet to keep the nitrogen supply high, which is necessary at the start of flowering; starting next week or when I refill the tank, I’ll start using the bloom fertilizer.
Wreak Havoc clone From 10 pk. Seed
MG2009
@MG2009
Follow
02/10/2021 I supper cropped the top 4" down toward lower level to promote auxins to redistribute, also starting 12-12 light cycle should be 8-9 weeks of flowering🙏 if she more than doubles in stretch,then I will need to switch to LED lights to finish
Humboldt Sour Diesel Auto (Humboldt HSC) — Box, Coco, LED
tangie
@tangie
Follow
Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?