Перевёл на воду. В целом можно было бы ещё спокойно кормить с недельку, но большая опасность плесени, это раз. Второе, некоторые колы уже полностью вызрели. Кабы было место где их сушить, то можно было бы собрать урожай в пару заходов, дав немного вызреть нижнему "попкорну". Вообще, конечно, растишка пьёт ещё очень активно, а это показатель, что ещё сильна и жива.

goow good 🌧️🍀🍃

I made so many mistakes during this run I can't even believe we made it to this point. The flowers aren't great but they're aight considering. I tested some run off and ppm was 3000+. I was consistently hearing the condensate pumps go off which made me think I was getting run off not realizing it was from the dehumidifier. The pics were taken on Thursday and after 2 days of flushing they look better and have swelled up a little bit. I sprayed dr zymes for the thrips 3 days in a row to try and knock them out. I know spraying in flower is never great but the zymes evaporates and really had no noticeable negative effects on the buds (pistil burning or residue) and I havnt seen a thrip or any damage in a few days. I also got the full line of Marrone bio grandevo, venerate and regalia which ill incorporate into a weekly ipm starting next run. I'm gunna wash the buds at the end. Hopefully all the dumb shit I do this run I can learn from and improve. Day 49 I've dropped the base nutrients and have them on 8 grams per gal of full tilt with some aptus additives and enzymes. The multi strain makes it tricky as a few really need 70-80 days but at this point I just want to wrap it up asap. I'll hand feed the 3 or 4 plants that still need the base probly.

Still growing! She started showing some hunger signs....increasing her ppm to about 1100-1200 now. Her top half seems to be about a week ahead of her bottom. I think I'm going to have to learn how to harvest in stages this time. Her lower half is just soooo far away from the light. She slowed down to only growing a half inch a day now....then....She FINALLY stopped growing (i think) Topped out at 44"! At least I hope, I have no more room LOL. I had the light as high as I could get it...then I took it off the hooks and tied it to the top tent bars. and got it a bit higher LOL She's only 2 to 3 inches away from the light now so fingers crossed she stopped growing. I got my first smell off of her this week too! Straight ORANGES, loved it! 6/19 - 39.2"tall 6/20 - 41" 6/21 - 42" 6/22 - 42.5" 6/23 - 43" 6/24 - 43.5" 6/25 - 44" 6/26 - 44"

FERMAKOR BARREL MIX – BASE IN USE (Testing on the Fantasy Feast girl we pulled out of another diary https://growdiaries.com/diaries/274722-grow-journal-by-yan402 ) (FERMAKOR BASE SYSTEM KOH VERSION diary https://growdiaries.com/diaries/278391-grow-journal-by-yan402) (Urea & Micros on the way — first week running without them) 🍶💧🍶💧🍶💧🍶💧🍶 💧 30 L Barrel – Current Working Mix 🍶💧🍶💧🍶💧🍶💧🍶 Step 1 – Calcium Nitrate (Part A) 7 L warm water (~35–40 °C) → added 45 g Calcinit, stirred until fully clear. That’s the calcium + nitrogen backbone for the feed. Step 2 – FERMAKOR PK Base (Part B) 15 L water in the main barrel → added 30 ml FERMAKOR PK Concentrate, mixed well. This forms the main P + K part of the formula. Step 3 – Combine Solutions Slowly poured the Calcinit mix into the barrel while stirring — no reaction, still crystal clear. That confirms the mix is stable and precipitation-free. 🌿 Step 4 – FPJ / FFJ Batch Added 30 ml homemade FPJ (fish + veg batch) ≈ 1 ml/L. Color shifted to a light-amber tone — looks alive and active. 🍋 Step 5 – Citric Acid Balance Added 1 tsp citric acid after everything was blended to fine-tune pH and help chelate micros later on. 📦 Step 6 – Top Up & Check Filled to the 30 L mark with plain water → pH tested with drops, showing yellow-green — roughly 5.8 – 6.0 range. Nice clean look, stable smell, no residue. 💧 Current Base Ingredients (Active Mix) Warm Water ≈ 22 L total Calcinit 45 g → N + Ca foundation FERMAKOR PK Base 30 ml → P + K support Citric Acid 1 tsp → Chelation + pH balance FPJ / Fish Emulsion 30 ml → Organic enzyme booster Result: clean amber mix, mild and balanced. I’ll let this version run for a week before adding anything. 👀👀👀👀👀👀 Observations and changes 👀👀👀👀👀👀 27.10.25 VW27 noticed some min burnt tips so I decreased Calcium Nitrate 45 to → 40g, decided to add two more elements micros and Epsom salts just to make sure they got everything, Fetrilon Combi 1 (Micros): 0.5 g, Epsom salts: 8 g 28.10.25 VW27 she seems devoid of any deficiencies, seems ready for the flip to 12/12 02.11.25 VW27 girl is looking good so I decided to stop making daily videos and do a standard once a week update. 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 02.11.25 VW27 -- Fed 5l of #1→ 2l runoff 03.11.25 VW28 -- Fed 5l of #1→ 2l runoff 04.11.25 VW28 -- Fed 5l of #1→ 2l runoff 05.11.25 VW28 -- Fed 5l of #1→ 2l runoff 06.11.25 VW28 -- Fed 5l of #1→ 2l runoff 07.11.25 VW28 -- no feed no water 08.11.25 VW28 -- no feed no water 09.11.25 VW28 -- Fed 5l of #1→ no runoff 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30 L #1 Veg — FERMAKOR 🍶💧🍶💧🍶💧🍶💧🍶 💧 Calcium Nitrate (Calcinit / Nitcal): 45 → 40 g = 1.33 g/L → 207 ppm N + 253 ppm Ca 🍶 PK Concentrate (FERMAKOR Base): 30 ml = 1.00 ml/L → balanced 1:1 P:K + light micros (from extract) 💧 Home-made FFJ/FPJ (Fish + Veg): 30 ml = 1.00 ml/L 🍶 Epsom Salt (MgSO₄·7H₂O): 8 g = 0.27 g/L → 26 ppm Mg + 35 ppm S 💧 Fetrilon Combi 1 (Micros): 0.5 g = 0.017 g/L → Fe 0.7 ppm • Mn 0.7 ppm • Zn 0.3 ppm • Cu 0.3 ppm • B 0.1 ppm • Mo 0.02 ppm 🍶 Citric Acid (Chelation & pH Balance): ½ tsp (max) = 0.16 tsp/L → add only after pH check 💧 Target pH: 5.8 – 6.0 (drop test yellow-green) 📦 TOTAL: 60 ml / 48.5 g inputs per 30 L = 2.00 ml/L + 1.62 g/L YouTube Link: https://youtube.com/-m8h?si=A7x4Zlr2kj-_ga31

Going smoothly, got a 3rd Trellis in case they grow to high

and another week in the life of the hardcore start from the blackberry rocks. all nutrients are in ger section if not other mentioned all is by manufactures instructions.

.

This first week in flower was a bit more exciting than previous weeks. I decided to put in a scrog net to help spread and even out the canopy. So naturally, I 3D-printed one. (Yes, I can be that nerdy.) Besides, it was the quickest and easiest solution as I don't like the stretchy-net kind so need a frame. Much easier to download a file and press print :D Installing it was a breeze and I also cleared away most branches and leaves below the screen. The stuff that won't make it above the screen and will just result in a bunch of larf. I'm still seeing chlorosis (which I suspect has to do with her transitioning into flower and stretching), so I gave her a bit of Orgatrex and Bactrex. Next week, I'll start feeding her PK booster. –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– This grow is generously sponsored by Bio Tabs Bio Tabs is an organic growing system that uses slow-release tablets of beneficial microbes, mycorrhizal fungi, and nutrients to create living soil that feeds plants naturally throughout their growth cycle. It’s designed to simplify growing and promoting strong roots, healthy growth, and large yields. Use code GDBT420 for 15% off at the BIOTABS Webshop https://biotabs.nl/en/shop/ ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Third week on bloom and the ladies are in full overdrive. I had to increase the humidity up to 70% b'cause of my predatory mites which I released a couple of days ago to get rid of these bloody spider mites. Rest is daily routine. Servus🤘 Oim

I'm thinking about starting lst soon although I may do a small amount of HST first and prune a few fan leaves. I am VERY amazed and impressed at the speed that these are growing. Check back next week to see just how fast she grows! & remember its 4:20 somewhere!!!!

The plant on the left has definitely developed quicker than the other. Not quite sure why the right plant is curving all sorts of ways. Currently dealing with fungus gnats which could be the reason but I'm glad one plant is showing strong signs. Trying to avoid harsh chemicals that may deplete microbial life so I'm hoping the plants can withstand gnats. I'm also sparsely watering to avoid further life cycles for them. Enjoying watching them grow. So far so good I hope.

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Veg is now over and let's go for the flowering, girls start to stretch and look happy 😊. 💪 Continuing Defoliation, lst, preparing scrog and daily fighting with this big leaves 😅 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 1.5 l Water + Roots + Bloom + Zym + Sugar Royal (1 + 3 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 45 cm Mars Hydro Fan kit Setting 5 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - Tropicana Cookies FF🌲🌲 https://2fast4buds.com/us/seeds/tropicana-cookies-fast-flowering

from the original grow ive only kept the 2 pineapple express and the 3 grandaddy purples... ive sent one of the grandaddy purples to flower its probably in week 2 right now and i will be making a diary about it. the northern light ive turned into a mother so its no longer a part of this grow diary since its going to be kept in the vegetative state. ill be sending 1 pineapple express and 2 grandaddy purples to flower in the flower tent. as of next week.. i will feed them bud ignitor an begin the process :)

Now we've reached day 34. We are now in flowering, we are guiltily carrying with us a bit of vegetative over fertilization but we are sure that we have worked well and that the flowers will not be compromised. The good news is that the plants are exceptionally vigorous and practically do not need fertilizer in the vegetative phase, and it seems to me to be excellent quality. We wait to see the flowers and you will see... Our Wurlz F1 per mea culpa mea culèa mea grandissima culpa shows some signs of overfeeding, the famous yellow tips of the leaves. Let's be clear, this is minor and is due to the fact that these genetics are so good that they need very little or no fertilizer in the vegetative phase. Then if you already have fertilized soil, forget about growing guys, another pro! I gave the recommended doses even a little less to tell the truth of both Aptus and Plagron and the plants more or less all have these small signs of over. LITTLE guys, wait until the end to save if you feel like it, or at least I recommend it. To fix this little thing we go to flush with pH 6.2 and only give Aptus Regulator which should rebalance the plant and soil before delicately moving on to fertilizers for flowering. Site Description ZAMNESIA SEEDS - WURLZ F1 HYBRID AUTOMATIC: EFFECTS TO LEAVE YOUR HEAD IN A WHIRL! As the end product of combining Runtz with Watermelon Candy, Wurlz F1 hybrid Automatic showcases a reliable, uniform, and, above all, easy growing experience. The resulting buds offer mind-blowing flavors and soothing effects, making Wurlz F1 Automatic more than worthy of being on your radar. GROWING WURLZ F1 HYBRID AUTOMATIC As an autoflowering strain, it takes just 9–10 weeks for Wurlz F1 Automatic to move from germination to harvest. Fortunately, there's very little required other than a bit of maintenance along the way. This is partly due to the F1 genetics that make this strain robust and uniform, resulting in plants that reach a similar height and provide a similar (large) yield. Moreover, Wurlz F1 Automatic is highly resistant to disease, pests, and other ailments. Reaching heights of about 65–80cm, Wurlz F1 Automatic is not an overbearing plant and can fit into smaller spaces with zero fuss. Once ready to yield, growers have the potential to see a return in the region of 450–500g/m² indoors and 50–150g/plant outdoors. AROMAS, FLAVORS, AND EFFECTS OF WURLZ F1 HYBRID AUTOMATIC Now we've reached day 34. We are now in flowering, we are guiltily carrying with us a bit of vegetative over fertilization but we are sure that we have worked well and that the flowers will not be compromised. The good news is that the plants are exceptionally vigorous and practically do not need fertilizer in the vegetative phase, and it seems to me to be excellent quality. We wait to see the flowers and you will see... Fertilization for flowering has started again otherwise there is a risk of going from excess to deficiency. Site Description ZAMNESIA SEEDS - WURLZ F1 HYBRID AUTOMATIC: EFFECTS TO LEAVE YOUR HEAD IN A WHIRL! As the end product of combining Runtz with Watermelon Candy, Wurlz F1 hybrid Automatic showcases a reliable, uniform, and, above all, easy growing experience. The resulting buds offer mind-blowing flavors and soothing effects, making Wurlz F1 Automatic more than worthy of being on your radar. GROWING WURLZ F1 HYBRID AUTOMATIC As an autoflowering strain, it takes just 9–10 weeks for Wurlz F1 Automatic to move from germination to harvest. Fortunately, there's very little required other than a bit of maintenance along the way. This is partly due to the F1 genetics that make this strain robust and uniform, resulting in plants that reach a similar height and provide a similar (large) yield. Moreover, Wurlz F1 Automatic is highly resistant to disease, pests, and other ailments. Reaching heights of about 65–80cm, Wurlz F1 Automatic is not an overbearing plant and can fit into smaller spaces with zero fuss. Once ready to yield, growers have the potential to see a return in the region of 450–500g/m² indoors and 50–150g/plant outdoors. AROMAS, FLAVORS, AND EFFECTS OF WURLZ F1 HYBRID AUTOMATIC After Wurlz F1 Hybrid Automatic wows you with its easygoing growing experience, the best is yet to come: the smoke test. Teeming with terpenes, this cultivar offers a fruity and candy-like flavor tinged with just a little bit of pine for good measure. In terms of effects, Wurlz F1 Automatic is bolstered by 24% THC and a finely tuned array of cannabinoids, making for a soothing, physically relaxing, and, in larger amounts, couch-locking high. So settle in with some of your favorite friends, snacks, and movies; this is relaxation at its finest. As for fertilizers, I'm doing a small comparison experiment to finish off the fertilizers I had at home, it's not 100% indicative, it's only on two specimens but given the stable genetics I decided to try to compare the results of Plagron Vs Aptus , both excellent brands which they will certainly produce beautiful plants which are already of excellent stable genetics. In the next few weeks the comparison will be more evident now the seedlings are still very small and just potted. So seeds of all brands, in addition to these great F1 Hybrids and the entire Zamnesia line, fertilizers and everything related to the world of cannabis, you should buy them from the best online store in the sector www.zamnesia.io

Let’s go Day 36 !!! This week went real great, girls built up a lot of structure, and stayed super healthy ! Today they got fed just water phd at 6.5 ! They been really loving that balance! I also removed a lot of under trim since we are going into preflower , so had to shave up those legs lol ! It’s really great for them , the love that airflow , but don’t take off too much or you could shock your plants so be careful ! Can’t wait to see what these girls do this week ! Hope you all enjoy an are ready for another amazing productive week ! Peace , Love , an positive vibes to y’all Cheers LetsGrowwww!!! 😶‍🌫️💨💨💨💨