Processing
Likes
Comments
Share
@Cogollo_eu
Follow
**Encontrarás la traducción a español al final de la descripción**
If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉!
From/Desde: 19/08/19 || To/Hasta: 25/08/19
From day/Desde día: 28 || To day/Hasta día: 34
-----IMAGES & VIDEOS-----
P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍.
P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it.
-----WEEK SUMMARY-----
Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º.
At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside.
This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up.
At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh.
About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing.
As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job.
-----WATERING CALENDAR-----
23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8
*****ESPAÑOL*****
Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉!
-----IMÁGENES & VÍDEOS-----
P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍
P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último.
-----SUMARIO SEMANAL-----
Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º.
Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto.
Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba.
Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla.
Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario.
Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo.
-----CALENDARIO DE RIEGO-----
23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8
Likes
2
Share
@Yamamoto420
Follow
As you can see, I separated the 18 1 L fabric coco pots to 2x grow tent 9 in 3x3tent and 9 in 4x4, till then I watered the plant hand watering, after i fill the water tank with 100 L with R.O water and added the nutrients, oh, and a week before I toped the plants. And installed the SOG nets.
Likes
43
Share
@TheCannaProphet
Follow
~ GG4 SHERBET FAST FLOWER by FastBuds ~
Well fam, here we go again with another epic strain from FastBuds Fast Flowering stable. After having such tremendous success growing their Gorilla Cookies Fast Flower outdoors last year, I've decided to run another of their fast flowering strains outdoors this year... GG4 Sherbet Fast Flower!
The best description of this awesome cultivar comes directly from my friends at FastBuds which is as follows:
"Bred from extremely potent and flavorful Gorilla Glue and Orange Sherbet genetics, GG4 Sherbet FF (Fast-Flowering) takes all the best traits to the next level, offering a high-yielding strain that can produce up to 600 g/m2 in a 7-week flowering time. This super resilient Indica-leaning hybrid thrives indoors and outdoors, and in all types of climates while producing mouth-watering sweet, fruity, spicy and earthy terps that translate into a delicious sugary hazelnut aroma. Expect an extremely relaxing and overall happy effect that’ll leave you with a huge smile from ear to ear. It’s the perfect strain for growers of all levels of experience seeking low-maintenance yet highly productive photoperiod varieties that deliver quality and quantity without extra effort.
GG4 Sherbet FF grows chunky buds with long dark orange hairs and spade-shaped calyxes that get encrusted with trichomes by harvest time, giving them a gorgeous silvery-white appearance. This medium-sized photoperiod can reach up to 200 cm in height and yields up to 650 g/m2 while developing that typical hybrid structure. GG4 Sherbet FF grows with a stocky, bushy appearance, developing one sturdy main cola and fat side branches that support huge yields without much effort. This super-fast variety produces distinctive light-green buds with a high bud-to-leaf ratio, making your trimming sessions a breeze. It’s a top-notch resin producer that doesn’t need much maintenance and will thrive in almost every climate, rewarding growers of all levels with extremely flavorful resin that makes for outstanding hash end extracts."
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
The Setup:
This is going to be an outdoor grow, but I have started the GG4 Sherbet Fast Flower indoors as our weather is still too cold to put her outside (nighttime temp's dipping regularly into the 30's℉).
The plan is simple... let her grow inside under a 19/5 light schedule until the nighttime temperatures stay above the mid 40's℉, at which point she'll be moved outside and transplanted into the soil which I have already setup and inoculated with beneficial microbes, and then let the fun begin!🤪💚
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Weekly Updates:
4/18- Here we go into Week Three for the FastBuds GG4 Sherbet Fast Flower. She's fully acclimated to her outdoor location now and all I'm waiting for is the weather to warm up!
4/20- 🍃HAPPY 420 FAM!🍃
4/22- The GG4 Sherbet FF continues to do well with good color and vigor, considering the cooler weather we're having right now, adding another set of leaves.
4/24- I gave her a good watering today and am getting ready to get some straw to spread over her soil mound to help keep the soil moist and reduce watering frequency.
There's another week for the little GG4 Sherbet FF. I'm really anticipating seeing her take off once our weather gets a bit warmer! Hope to see you next week... 😎
Likes
6
Share
@Reidy_B
Follow
Things are looking great! Gearing up for flowering soon! Getting pumped! 😃☀️
Likes
15
Share
@Dunk_Junk
Follow
Closer to the end than the beginning now!
I'm thinking another couple of weeks, lets keep an eye on the pistils and see when they all turn colour.
Likes
33
Share
@McBubatz
Follow
10 Woche, BW 4. Straw Limez is eine richtige Macherin, schon richtig harzig, so schöne stabile Triebe und ordentlich Masse. Jetz geht langsam in die heiße Phase, hoffentlich bekommt sie auch schöne Buds.
BW 4 Tag 5, Bild 5 und Video, Straw Limez hinten rechts.
Wünsche euch allen eine schöne Woche und bleibt gesund 🙏, bis nächste Woche dann.
Processing
Likes
124
Share
@CRiSPrGrow
Follow
Auto cous kush is just coming onto it's own, making plant matter and working overtime in that slightly cold medium. I added aloe as a rooting agent, tried to ph it down to 6.5 using lemon juice (not doing that again lol?) and ended up catching the start of pH shenanigans so i started applying an amino acid spray onto the soil (not the plant!) . using my kelp extract concentrate at 1ml a L in my 250ml spray which means a 1/4ml , that gets sprayed once onto the plant. gonna top off the pots next watering. in soil ppm went from 360 to 420 , vpd went from 0.8 to 1.1.
Likes
6
Share
@MO_PureLeaf
Follow
Ich würde mal sagen jetzt geht die spannende Phase los :) ich freu mich schon auf die buds! Bis dahin 🏻
Edit: am 14.5 haben wir bisschen mal etwas blattwerk weggenommen :) die Pflanze zeigt heute auch schon (glauben wir) Blüten Ansätze :)
Likes
5
Share
@Mr_nugs_lover_David
Follow
Here is another hard diesel that I'm planting to replace the other seed I planted on January 16th let's see how this lady performs!
Likes
17
Share
@Naujas
Follow
Although I am not a Super grower, I have not grown many plants, but for this girl, there were definitely bigger ones, but were there any more beautiful ones than this one?, I highly doubt it :) she looks fantastic, the finish is very close :)))) @FastBuds gorilla cookies auto. with small space, high temperature, high humidity, it copes without major problems :) which makes me very happy :) good luck to everyone :)
Likes
9
Share
@Rock_n_Roll_Randy
Follow
FOR EVERYTHING MARS HYDRO VISIT:
www.mars-hydro.com
www.marshydroled.ca
PROMO CODE: rocknroll
VISIT THE ALIEXPRESS STORE:
@marshydro_aliexpress
Instagram: @marshydropenny
Thanks for taking the time to read and check out my diary🤜🤛
TS3000 FEATURES:
WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems.
HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom.
HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000.
BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below.
COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups.
Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake.
High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights.
Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light.
Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds.
Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy.
Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair
5x5 GROW TENT:
LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all
DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal
EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air
AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER:
Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment.
GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors.
EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting.
LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment.
EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment.
BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.
Likes
9
Share
@Smokey_J26
Follow
Girls got a little stressed out as you can see in the images, but they will flourish after a defoliation and a good feed...
Likes
5
Share
@connormcleod47
Follow
56 days from seed, soil was hot from day 1 & I ended up stunting the plants this run... Extremely low yield at 2g but still enough I will at least be able to test, even though i stunted this one & it was pulled early can tell it is something I will definitely grow again!
Heavy gas/cake on the nose, proper Wedding Cake in an autoflowering format!
Grown in Black Swallow living soil with Cronks PUUR Organics line!
Photos taken with the new Sony A7 V + 28-75mm F/2.8 Tamron Di III VXD G2 zoom lens, images are heavily cropped & could have been better, am still learning how to use the camera :P
Likes
7
Share
@UrbanBoer
Follow
I cannot wait to see how this beautiful Queen is going to look at te end of the flowering stage, she’s the closet I’ve came to LST in a manner I wanted this baby to grow, loving how brunches twirl around the twig, l have stopped growing Christmas tree shaped babies. I LST from the seedling phase right through to flowering, you should not forget that this plant can take stress, imagine it was growing in the wild, some stress in your plant’s lie is critical for positive growth, from my point of view my trees are going to struggle with big buds, because it does not have this thick stems.
Likes
5
Share
@Smokwiri
Follow
Welcome to the diary of the Limited edition strain: Orange skunk ryder
OMG, this DANK has started to finish
it smell like i have at least 50 of them in flowering, but when you follow your nose you only find this little lowryder crossbreed.
it looks great, trichomes look very tiny like grown under LED, but it's outdoor
i'm leaving this outside for some extra days and then i'll start to cut the main cola, which isn't really big, but smells o so promising.
this plant is very stealthy, and it needs to be stealthy because it's that stinky.
Likes
14
Share
@rainman
Follow
Last week was very good, plant grows very very fast, didn't expect it. Hope i FIMed right. Maximum amount of nutrients from this week.
Day 22 - Day after FIMing, everything is good. Gave her 3L with increased amount of nutrients. Removed lowest 2 leaves.
Day 23 - Plant started to stretch out. Done some LST.
Day 25 - Plant is stretching out and getting bushy, love how it looks. No smell yet, no signs of flowering.
Day 26 - Woke up and through i need a scrog. So me and my friend Daweed done some 5 minute crafts and now i have scrog. Plant is growing good, increased amount of water from now. 4L today.
Day 27 - Damn this plant is growing fast. Very beautiful. No signs of flowering yet.
Day 28 - End of week 4. Great progress this week, grow changed drastically. Got some nice LST, SCROG. Little woried about no flowering signs, but i hope it will begin on next week.
Peace.
Likes
10
Share
@MistaOC
Follow
Grow Diary – Day 76 (Flowering Day 61)
Strain: Amnesia Core Cut (Clone)
Training: Topping, LST, HST, SCROG
Nutrients:
• Aptus Regulator: 0.1 ml/L
• CalMag: 1 ml/L
• BioBloom (Dry Amendment): 60 g (applied June 26)
Water: pH-adjusted RO water (final flush phase)
Lighting: LED at 60%
Date: August 10
⸻
Status: Forced Harvest – Pest Pressure Too High
Today marks the end of the cycle for this Amnesia Core Cut—Flower Day 61. While buds are well-developed and aromatic, pest pressure from thrips and aphids reached a level that would likely destroy the plant if left for another 2–3 weeks. To preserve quality and prevent further spread, the decision was made to harvest early and clear the space for the next run.
⸻
Harvest Condition:
• Buds dense and covered in cloudy trichomes with ~15–20% amber
• Aroma at peak—intense citrus-haze with earthy undertones
• Sugar leaves showing late-stage fade, fan leaves largely yellowed
• No visible bud rot despite pest presence
• Damage from pests mostly on foliage, minimal on buds themselves
⸻
Reason for Early Harvest:
• Rapid increase in thrips and aphid populations
• Risk of pest spread to other plants in the grow space
• Plant already in late senescence; continued flowering would add minimal weight but increase risk significantly
⸻
Post-Harvest Plan:
1. Drying in a controlled 18–20 °C, 50% RH environment with steady airflow
2. Cleaning & sanitizing grow space to remove pests before introducing new plants
3. Inspection & culling of any nearby plants showing early pest signs
4. Planning next run with improved IPM (integrated pest management) from day one
⸻
Closing Notes:
While an early harvest is never ideal, the quality of the buds at this point is still high, and the loss in yield is offset by saving the rest of the grow space from a full infestation. This run provided valuable insights into pest prevention timing and senescence management in the Amnesia Core Cut.
Likes
11
Share
@Growing420Dreams
Follow
Toda la gama de productos utilizados en este cultivo se pueden encontrar en nuestro grow de confianza www.elpunto030.es
Gracias por el apoyo
Likes
7
Share
@Lazuli
Follow
The flowers start to swell, next week might start the overdrive for the extra weight