Likes
Comments
Share
Surprised by how well the water is wicked to the medium from the water bottle, it took a long time, but wick works as intended. I was unsure how much if any nutrient would be transferred via wick but the high salt content altered pH at certain parts. Right before the symptoms arose I decided to supercrop the stem top to bottom on one plant, shortly thereafter the burning happened from the same plant from running 8.0 pH, and nutrient uptake ground to a halt on the plant that was dealing with stress. She doesn't seem happy. Remedied with aluminum sulfate, things seem to be coming back to normal. I need to be more careful with salts. I need MOAR knowledge. How many weeks shall we veg? Going to take a while to fill that canopy with just two plants, should probably start topping now but I'll wait until pH problem Is remedied first, a couple more days hopefully 🙏. I defoliated maybe 6 bigger leaves that had burned yellow on one plant, as it comes back to optimal range, this will be a good opportunity to observe the subtle differences that early defoliation can make. Added a pound of tourmaline powder and biochar, both increase soil urease and invertase activities. *2025 Didn't charge the biochar skewing my ph drastically. Urease is an enzyme that catalyzes the hydrolysis of urea into CO2 and NH3 and is a key component in the nitrogen cycle in soils. Invertase (d-fructofuranosidfructohydrolase, EC 3.2.1.26) is the enzyme that capable both break down α-1,4-glycosidic linkage between d-glucose and d-fructose of sucrose and transferring αβ-D-O-fructofuranoside residue to an acceptor substrate (Toledo et al., 2019). Since tourmaline is widely distributed in the natural environment and has many excellent physical and chemical properties including radiating far infrared energy, permanently releasing negative ions, producing an electrostatic field, releasing rare microelements, and stimulating the growth and metabolism of microorganisms and plants, tourmaline had been conducted to alleviate potential environmental pollution. Perfect for how much seaweed I've added just incase.
Likes
6
Share
Likes
55
Share
Well there’s 6 weeks of veg down, tonight will be the first night of 12/12 with HPS bulbs in. I’m going to be running the lights from 9pm to 9am due to summer heat and hopefully the tent will run cooler at night. Everything was super cropped today to limit the stretch a little bit, she’s 95% indica so might not get to much stretch, I also don’t have a clue as this is my first photo run with the HPS. All light leaks to the room have been addressed with green bulbs in the room. I’m at least hoping to get an ounce per plant if more great just not really sure what to expect. I feel as tho there is still lots of N in the pots but maybe over the next two week they’ll chew right thru it. Maybe I should have lowered the lights but I’m just going to leave em at the top of the tent..... well that’s it for now, I leave tomorrow for work so the next time we see em they should have some bud starting hopefully!
Likes
4
Share
60x60 cm tent in a 1920's peek-in-closet Oversized vent for silence High power DIY LED True SoG 12/12 from seed with 15 plants in 2L pots Watering all plants in bottom tray with 30% of total pot size (10L) WEEK 1 DAY 1 - Germinated in paper towel DAY 3 - Planted into pots + Lights ON at 125w DAY 5 - All plants have broken soil DAY 7 - Slight stretch - Light at 185w WEEK 2 Two of the Iced Out are lagging behind, others are on point - I'm trying to push light and nutes to the max. Extraction fan (AC infinity Cloudline T6) on level 2. DAY 13 - First full watering (10L) with 20 ml Canna Terra Vega DAY 14 - Circulation fan turned on (low) during lights on WEEK 3 Good growth, two Iced Out still lagging DAY 18 - Light at 225w, Extraction fan on level 3 during lights on DAY 20 - 2nd watering, 8L with 30ml Vega + Light at 250w DAY 21 - On point, mostly :) Could've pushed nutes a bit more from the go WEEK 4 DAY 24 - So far this week I'm just kicking back and watching them do their thing. The two lagging Iced Outs are trying to catch up. DAY 26 - Watering 10L with 50 ml Vega (one day too late...) + light on 300w (max) DAY 28 - 4 weeks from popping the seeds, looking good except for the two Iced Outs, one of them is trying to get with the program, the other... Well, some plants are just pricks.
Likes
60
Share
@m0use
Follow
Alright! This week is finally done and this will be the last vegetative growth week for the plants. Switching to flower tonight :D I have done some defoliation and a bit of lollipopping to the 3 plants, I was noticing the shadows where quite dark on the tent floor and the plants where not crazy tall so they needed to be managed, If I was outdoors I would just LST them some more and not worry about any of it but indoors the airflow is tight and it was needed, cleaning up the undercanopy was none negotiable or some bad things would have happened in flower. Mainly molds or worse WPM. I also removed the string supports I has on the plants when they broke from some LST I did a few weeks ago. In the stripping down of the plants I removed a lot of lower immature growths and took out some immature branches, I have all these sitting in a glass of water and will clone them out for shits and giggles, I think their is about 15 of them or more, maybe I will go and plant them aorund my neighbourhood in municipal planters. Plus now I can work in the topdressings that will be required in the upcoming weeks to keep these plants happy and healthy. Going to continue amending in some of the bokashi in the feedings as well as worm castings as they give off a nice ammount of microbes for the soil. I wish I had some of my LABs for this grow but I did not make any. The clones from before are doing fine, just did not take any pics of them. The butterwort is doing a fantastic job of eating up the gnats. I have some nematodes on hand for when its had its fill as I won't want them getting into the flowers as they ripening. Big shoutout to Medic Grow for sponsoring the lighting in my tent, They have provided me with 2x Mini Sun 2's in the 240w configuration, They use the v1 growing spectrum that is a all purpose seed to harvest spectrum so their is no hassle of switching it mid grow. If you interested in learning more about Medic Grow products please visit the web link below. https://medicgrow.com/ https://growdiaries.com/grower/MedicGrowLED
Likes
12
Share
@Lysidious
Follow
WoW many crystals have formed overnight, almost as if she went out and partied hard and forgot to wipe her “nose” before she got back home... No complaints at all, just watering daily with pH 6.4 water and adding compost tea. Going to do a phosphorous boost on her this week since she is starting to pack on mass... Thanks for reading.
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.
Likes
10
Share
@Mazgoth
Follow
I’m waiting for a humidifier to set the perfect humidity level for my plants so the first week will be a little bit difficult for them but they will be happy afterwards
Likes
21
Share
This is the last week before i harvest today. I gave them 1 gallon each of rain water on Wed.12/20. PPM was down to 93 after last runoff. After this entry i will harvest,wet trim and hang some and use a drying rack for the rest.Wish me well and i will update as i go along the process.
Likes
59
Share
Rolling through week 4 of flowering for the first rhino Ryder and white Russian things are starting to look good ! Rhino Ryder 2 coming to and end of week 2 of flowering not to far behind the other two glad all plants are pulling through strong !! Same ratio with nutrients temps between 72 and 77 and humidty between 30 to 50% Smell is pretty strong would say 6.5 outta ten ! Water every 3 days 2 gals a week pretty much using Poland spring natural water for now. Check out the rest on my Instagram bakeryguy420 doing my first give away for seeds and glass spoon Some updates photos towards the end of the week and some videos!!
Likes
16
Share
Added Exhale c02 and top dressed in each pot with 1 tablespoon per gallon of growing medium my pots are 3.6. I added 3 tablespoons. It is my hopes that with adding the slow release dry amendments and once the c02 bag sarts growing my plants will finally grow. They are short but have 4 nodes at day 21. What is an exhale c02 bag? “The ExHale bag is a patented strain of mycelium that produces an abundance of CO2 without fruiting. This means that when our bag is activated, the mycelium grows, eating the substrate it comes with, giving off heaps of CO2 straight into your garden, and it does all this for 6 months - guaranteed!” At day 25 I am not impressed with the size of these girls? Hope they hit a growth spurt soon? Their internodes are stacked very nicely. At day 28 growth is very slow. Practically none existent since my top dressing at day 23. 2 plants have received a very minimal nutrient burn. As I do not have a soil ph tester? I will be watering with a ph of 6.0 rather than 6.5, hopefully that helps. ONWARD!
Processing
Likes
9
Share
Likes
17
Share
This plant is taking well to the training and im in love! Lets see how rapidly she grows within the next week or so!!! Lets go papaya
Likes
20
Share
Que hay familia ya traigo la décima semana de floración de estas Lava Cake de Zamnesia. Vaya color que se marcan todavía, están bastante sanas , los tricomas están pegajosos , tiene unos aromas espectaculares, me tiene enamorado. Ya estamos en la recta final , se están poniendo a punto de caramelo. Temperaturas máximas en 27 y mínimas en 25y una humedad estable en torno al 36%. Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Espero que lo disfrutéis, buenos humos 💨💨.
Likes
5
Share
Eccoci di nuovo qui!!! Super eccitato per questa nuova collab con Exotic Seed, team davvero al top, che mi ha dato l’opportunità di testare questa nuova genetica e di condividere i progressi con tutti voi!!! Come sempre partiamo nei bicchieri per poi travasare.. Questa volta verrà svolto tutto sotto la Lumatek Zeus 465 ProC, mi aspetto molto da questo ciclo!! WOOOOW!! Grazie a tutti per il supporto ❤️🍀🔥
Likes
20
Share
@apmcfly76
Follow
Harvest, one plant no, it’s time to trim done this one was a good lesson.
Likes
17
Share
Venga familia que ya viene la cosecha de estas finta F1 de ZamnesiaSeeds, que ganas que tenia ya de darles machetazo, me estaban dando muchos quebraderos de cabeza. Las flores no son para nada llamativas, una variedad más cruzada con rudelaris, que para mi gusto es perder el tiempo y el dinero invertido en cultivar cosas así… no merece la pena en interior, el ratio de gramo watio se me quedó en 0.5 , de los no peores resultados que tuve en los últimos 5 años. a sido una genética con la que no disfruté nada cultivarla, es complicada, es bastante sensible. Las plantas en sí se quedaron enanas y para nada fue lo que esperaba, me recordaron a las autos que plantaba en el 2012… Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Hasta aquí es todo , espero que lo disfrutéis, buenos humos 💨💨.
Likes
44
Share
Info : Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Harvest day 67. Hey guys :-) . Finally the time has come the lady has been harvested :-). In the last week the water was freshly mixed with Canna Flush and an Ec of 0.4 in order to completely use up the nutrients in the last few days 👍. You can see it on the beautiful autumn yellow leaves :-). Before harvesting, the lights were turned off completely for 48 hours. After everything was neatly trimmed by hand, the buds were put into the drying tent, where they are allowed to dry for the first 8-12 days at a humidity of 62% before they ferment with 62% boveda packs in jars. After another 3-4 weeks in the glasses, the 58% boveda packs come in for the final touch :-). Of course, the final update comes from the fermented end product 👍. Until then, I wish you all a lot of fun and stay healthy 🙏🏻 You can buy this Strain at www.Zamnesia.com Type: Runtz ☝️🏼 Genetics: Zkittlez X Gelato 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.6 - 6.4 💦 💧