Day 42 Flowering: Another great week creating some beautiful looking buds and plenty of trichrome action too. The #1 has begun to colour up her bids now with orange hairs as she matures more. Still.lots of fresh and new pistils being put out too but it is giving her a nicer ripened appeal to her tight , fluffy edged buds. Her gorilla glue genetics are certainly visible along with her twin #3 who is also putting effort into her bud production now. #2 is turning into an amazing looking plant amd i amd so impressed with the teichrome production now. Her pitch black/purples are being covered in a snowy coating of heavily built up trichromes. Her buds are so tightly packed in too with very little leaf among them. Her main leaves are turning some very nice autumn leaf colours among the dying off ones . I think she needed feeding earlier in her flowering period to have given her the better boost but the mature looking fade away on also a good sign of her intentions to harvest soon. #4 is approx a week behind the other 3 and is beginning to look very similar to the #2 now so could be the same pheno after all. She has some real appeal on the stems, I just wish they were all a lot bigger .lol The pictures do not do the beauty of the strain justice at all but the video is at least a little more able to show the differences better. They are really pumping out some funk now as soon as I go up the ladder you can smell the danger of the potency ahead.lol Up close and touched they smell so sweet with a hint of chocolate I think!. Lets see how they end up. All in all a good week and now hopefully the swelling starts before the final two weeks to ripen come into play. Be safe and well Growmies. Sweet cheese looks like an advert for an auto grow with her visual appearance. classic Christmas tree with thick main and growing side branches. Her leaf to bud ratio is not very impressive but if she coats with trichs well enough, then trimming the leaves into the final manicure will be OK i think.

not much to say here, transplanted into bigger pots and so far still growing without any complications, picked some of the leaves. thats it. Hopefully i can switch the light cycle in the next 2-3 weeks, lets see what happens next.

Flowering day 18 since time change to 12 / 12 h Hey guys :-) The ladies have recovered well from the cold thanks to the heating mat and have developed beautifully 👍. During the check today I saw that despite spraying neem oil 3 times, there are still a few trips :-( . Now I've ordered nematodes again specifically against trips for leaf and substrate. I will use that immediately 👍. Watering was done twice this week, each time with 1.3 l (nutrients see table above) Next week I will remove the lowermost shoots so that the energy goes into the upper buds. Fresh osmosis water was mixed with tap water and put into the 100 liter tank so that the water can stand and I'll have enough next week :-) Otherwise everything was cleaned. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/de/hanfsamen/hippie-therapy-cbd Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Всё отлично. Появился слабый запах. Средняя температура 23 градуса

Apr 11 The plant is now actively sacrificing lower, less important leaves. I've used flexible garden wire to separate the side colas from the main cola to help light get in. Things are fattening up and trichomes are developing.

Flower development definitely set back right from the beginning with extreme light intensity reaching 1650 ppfd before corrected. Never fully took off I don’t think. Midway through week 7 started to slowly dial back the intensity from 900 at tops to 650 ppfd. This is a 9.5-10 week strain. Using fish shit to keep things ramped up, also Bokashi Bran and worm casting. Also mixing in Gaia seaweed extract 0-0-17 with the fish shit. Not a whole lot more needed that the soil and top dressings doesn’t already have, if anything at all. I just like to give it that extra kick. I had completely wiped out those pesky fungus gnats and future offspring before flower, but they came back after top dressing and adding more soil. They come in the bag soil, and while I was on holidays for 10 days they came back and I wasn’t on top of the new wave of those dirty bastards. Just about got them cleared out again with the use of nematodes and sticky traps.

Comenzando la semana 4 de floración y a las nenas le dimos una bienvenida para que comiencen de lleno esta fase de engorde. Estos día bajamos a 2 riegos por día. Normalmente hacemos 3. Ya a mitad de semana volveremos a los 3 riegos. A las nenas le sacamos prácticamente toda las hojas de abanico, ahora tenemos muchísima más penetración en la planta. Quizás tengamos problemas de altura pero ya estamos buscando la manera de resolverlo.

Starting week 3 today, with a challenge ahead with this little bad girl! It's looking good! I'm feeding the plant once each two days, with Seaweed Tonic, 150ml with the suggested dilution from the bottle. Now I have also a bottle of Canna Terra Vega, with NPKS 3-0-3-0. Is it a good idea to start feeding the plant, with also this nutrient? The soil is a mixture of 80% organic soil + 20% of coco coir. What is the best agenda to follow with nutrients? Cheers!! (:

Start of Week 3 There was 5 inches of growth over the last 7 days. It is a total of 25inches now, when I started flower it was 16 inches. My guess is that it will get to around 32" I have two sections of plants growing from the same feeding resivour. For the first time ever I've decided to do a mid grow flush. I ran through 1-2gal of water on each 5 gal bucket. I use only perlite as medium so I figured that I wouldn't need much to flush. It all drained back to the main resivour and I disposed of it. I ran a 24hr cycle of straight PHed tallboy filtered tap water (160ppm) and then drained that again (340ppm). I refilled the resivour with fresh nutes and PHed again (1100ppm)

Overall I enjoyed this grow and learned a lot about living soil. Going for a slow dry, trim, then at least a one month cure. Hopefully another six days and I’ll update with a dry yield. My next batch is already cooking but with 5 gallon pots. 03/25 - Day 7 Drying B & C are done drying and have been in jars for a day now with RH ~60%. Total 3oz from B & C. Total 1.5oz from A & D

17/07/22 des fruits apparaisse dans une grande majorité ,j'ai essayer de scrog les chessecake et les wedding glues en bon débutant j ai casser une branche que j'ai essayer de reparer a la macgyver tout sa en photos!.je suis très satisfait du milieu de cette semaine ! 22/07/22 demain dernier jour de la semaines des fruit a 90% partout plutot bien lancer mais pas très homogene j'ai pas mal de progrés a faire^^ très bonnes semaine a suivre

Fought root rot/res/nute issues all week, but seemed to have turned the corner. Nice steady growth. Cleaned the res hard at the start of the week and continued to treat with H2O2, and switched to Lucas Formula for nutes along the way. I added ~30mL of 3% H2O2 daily for 4 days before the smell seemed to disappear and roots recovered. Afterwards double dosed the hydroguard again. Noticing very dark and shiny leaves with some clawing. I hadn't been measuring the EC in the res and figured I burned the plants. I replaced 1 gal of the res with pH'd tap water to reduce the EC/PPM. Did not take exact measurements. My notes get thinner from here as I had too many plants going at once to properly document this first attempt.

Started off bad with serious calcium deficiency. I was applying the nutrient schedule built on a 500 basis while my measurement device is based on 700. I was starving the plants without realizing it - Trimmed off the damage, upped the nutes and looking good as new.

Hello:) this week was kind of confusing, they showed me light signs of deficiencies, so I added a bit of bactrex and orgatrex and then 3 days later they show me signs of overfertilization… So that‘s 3/3 grows so far for me that I used too much fertilizer… It‘s still looking great overall:) I‘d guess we‘re done in about a month!

Soon flipping to 12/12

Week 3 continued with good and steady growth. Yesterday I started to train the plants head with LST to the back for more even canopy in the end.

Starting Week 16 tonight and she managed to stretch another 5 cm over the last week.. The stretch is real, and the bud sites are coming along nicely. With a clean clean Reservoir, im looking forward to the week ahead as i expect to see some buds sites to start to fill out..

Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?