Week 1 of flower is in the books and she's starting the stretch. She's looking really healthy and showing a lot of potential bud sites. I have trimmed up some leaves to allow more light penetration throughout the entire canopy. I really wish I put up a trellis but oh well. Looking forward to the buds this one puts out.

As I stated before this is my mutant plant hehehhe.. looks like buds are fattening up a bit and more light penetrating in the colas.. she seems to be growing.. happy days

Good week, they're happy to be in larger pots. Used Coast of Maine Bar Harbor Blend potting soil. Got some new growth coming in, especially on the redder one. Big Bloom this week. Seriously considering putting them in the ground soon despite cold nights. They want the sun!

08/01/2020 Lots of pistils popping out on her, no stretching yet but that will come soon! I will measure her in the morning to see how much stretching occurs by harvest time 70ish days I am told.

Hi Growmies, the plant is doing good so far. I have upped the lamp output to 50% of the veg part for the coming week. I have put her straight away on a very heavy feeding schedule, so let's see how she will handle that. I am super stoked to grow this strain, as it was one of my favourites back in the day, when our market was flushed with it :)

Well yesterday I cut the girls down 18/12. Had some fun times (first time I've been in a tent with 3 girls lol)🤣. It's been 4 months since they sprouted and for a first grow it's been very eventful to say the least. I'll be keeping you posted with the dry weight in about 10-14 days growmies. Take care all and have a very merry Christmas and New year 👍✌️👌

She's looking so beautiful,very nice strain to grow for sure,I'm trying to give her a good shape before flowering starts. I add organic liquids nuts only once a week and looks like she loves it,let's keep up the work!! 💚💛❤️🌱🤩

DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Waiting for first signs of life … While we are, I thought I’d give you a short explanation on the software’s graphics in case you did not follow my first diary. The one to the upper left, as its headline says, is the temperature graph. Most important line is the red one, showing the leaf temperature measured with an infrared temperature sensor. As there are no leaves yet, it is pointed towards one of the pot’s wall at soil level. Air temperature from a sensor that usually hangs around somewhere around top level is violet, and the grey line is the outside temperature close to the tent, helping the software to determine if a main blower action will effectively lower temperature. As I learned from the first grow a plant day that corresponds to the natural day can cause enormous gaps both to temperature and humidity, I inverted the plant day now, starting their night at 11 a.m. So after the first day temperature will only vary around 1.5 °C, which is of course due to the low light intensity too. Humidity graph on the upper right is quite crowded. Main line is the blue one, tent air humidity, which on this first day was between excellent 65 – 70% most of the time. For the moment humidifier is electrically disabled. There is quite some excess humidity on the tent floor and no reason to push this any further. Outside air humidity is grey again and taken from the same outside sensor that reports outside temperature. The soil humidity sensors are simple analogue capacitive sensors which have their flaws. I am interpolating their measurements to have a somewhat smoother reading, but as you can see from the turquoise humidifier reservoir reading (in legend named as plant soil hum 1), they can get confused when humidity is very high and start to report random numbers for some time. The most important graph for all growing stages is the lower left one, where the pink line meaning plant VPD should be inside the green optimum range for somewhat perfect conditions. This cannot be attained all of the time – dehumidifying isn’t as easy as humidifying –, but software tries its best to do so. Outside VPD is grey again. The last graph is more for amusement than anything else. The light intensity sensor is hard to position correctly, and everything you see about illumination and DLI (orange and green, plus grey for the accumulated 24 h DLI) should be taken with some spoonful of salt. Any resemblance to real world professional instrument readings can be considered purely coincidental. The violet line is the CO2 reading from such a sensor, and you can see that its tiny peaks correspond to even tinier black peaks at the bottom of the graph, reading TVOC values which in this case, once they will be more than possible measurement irregularities, can be interpreted as smell. ------- End of week 1: All seeds germinated. I wasn’t at home most of the time, and it turned out using the humidity sensor to monitor the humidifier’s tank wasn’t good for the stability of the system. Arduino crashed, so there are no pictures yet and no graphs to show. I have the feeling light was a bit low as the seedlings grew a bit tall, but with lights now up to 20% I guess this problem is fixed. More tomorrow when I have some more data to share. Even more end of week 1 (I extended this week to 9 days as I cannot tell when the seedlings started to show): Lights are at 40%, meaning 40 W in total. No reason to give them new water until next week. As some flies showed up from the BioBizz soil, I added 2 yellow cards. So far, everything in normal ranges. I’ll switch the control to grow phase soon which will raise the VPD slightly by 0.5 kPa. It’s interesting to see the CO2 level started to climb by 50% during their last night and has not come down to baseline afterwards. I restarted the app to check if the sensor had lost its calibration, but it still sits at around 660 ppm now.

I love how everything has came along so quickly. Absolutely love going Organic with compost tea brewing at home and molasses. Using Neem for pests and mold. Absolutely loving the results so far. Using a California Lightworks SolarSystem 550 with view mode, custom spectrums, program a whole season..... etc. I hate the measuring system for nutes on here. Im all organic so using compost tea I mix about 1/4 to the rest water and water in plants ev other watering.

Going into flower like now I think..🤔 Lol, yes it’s flower time already.🤭

Here we go 😊 Planning & germination 👍 I´m really looking forward to this run, the SpectrumX from Medicgrow with build in PPFD, 4 spectrums V1, F1, VS, FS and 880 Watt is definitely serious business 👊 Trying out a new soil in this grow. The plant mulch is an exclusive mixture of harped mulch, nutrient-rich natural fertiliser, hill sand and long-term matured compost. The mixture provides a porous and airy structure, which ensures that both water and nutrients are easily accessible to the plant's roots. Stay tuned and Keep it green 😎

Outside Temps are plummeting - Entering Winter Running Fan Heater at night. First Dew Frost on the 1st of June Added min-max hygrometer There's still damages, pruned affected leaves New growth looking normalised. Budding is slow

5/23/2023 Week 7- Day 1 of Flower (Day 110 overall) (Day 49 of Flower) There was a couple of small super small sucker buds on the lower stocks that needed to be cleaned off but that was it. Just watching them Flower!! 5/24/2023 Week 7- Day 2 of Flower (Day 111 overall) Tucked a few fan leaves below lower buds but didn't see any blatant offenders that needed to be removed. I typically do start my checks in Week 8 but since this is a new strain I decided to go ahead and do a Trichome check just to see what was what.. Just as I thought nothing but clear glassy Trichomes. I will check again in one week.... 5/25/2023 Week 7- Day 3 of Flower (Day 112 overall) Just letting them grow today!! Smell is getting stronger I would say it is a hint of Pine and a heavier fruity smell. 5/26/2023 Week 7- Day 4 of Flower (Day 113 overall) I did Nothing but took some pics and I enjoyed it!!!! It is nice to be able to just sit back and watch them on auto pilot.. :-) Tomorrow Water Change Day!! 5/27/2023 Week 7- Day 5 of Flower (Day 114 overall) I admit it.. I had to defoliate a little bit.. I looked in while changing the water today and there were just a couple blatant offenders blocking the light from lower bud sites and those leaves they just had to go. Other than that I changed the water and this week is where I drop everything and start preparing them for this last phase of the grow. Loving a few of these buds they are starting to beef out very nicely. I added 36 gallons Mammoth Silica = .5Mil/Gal= 18Mil Root DRIP = 1Mil/Gal= 36Mil CalMag= .5Mil/Gal= 18Mil FloraMicro = 3.8Mil/Gal= 137Mil FloraGro= 2.8Mil/Gal= 100Mil FLoraBloom= 4.6Mil/Gal= 166Mil LiquidKoolBloom= 2.5Mil/Gal= 90Mil TPS SIGNAL= 4.0Mil/Gal= 144Mil ORCA = .5Mil/Gal= 18Mil Water Temp= 70.1 Tent Temp= 76 Humidity =64 ** I have two dehumidifiers running on Ink bird controllers to try and keep the humidity down, In late in flower I like to keep the humidity above 45 but below 60. 5/28/2023 Week 7- Day 6 of Flower (Day 115 overall) Opened the back of the tent today and boy did she need some defoliation love in the back. Other than that I took off a few little sucker buds trying to form. I did start to setup my Dry space as well as did a Trichome Check today and the brown tips are coming in nicely. 5/29/2023 Week 7- Day 7 of Flower (Day 116 overall) Found a few baby sucker buds trying to form so I removed them. Other than that I am enjoying watching her mature. I also started my Reverse of the Clone I took 6 weeks ago in Apr from #3. I am uploading footage of the reversing process for your viewing pleasure.

Día 13 (06/05) Nos acercamos al final de la fase plántula. A ver si ahora empiezan a crecer de forma explosiva! He sido muy estricto con los riegos, dejando que el top hasta el nudillo se seque completamente! Día 14 (07/05) Hago una mejora en la tienda. Hasta ahora tenia intracción pasiva, pero ahora he instalado una turbina para que impulse aire fresco dentro de la tienda Día 15 (08/05) Con el calor que hace me sorprende que las macetas sigan aguantando la humedad, pero al hundir el nudillo sigue húmeda. Mañana haré un riego de nuevo Día 16 (09/05) Relleno el top con sustrato para compensar la compactación y dar mas soporte a las plantas Riego con 300 ml solo H20 - pH 6,2 Día 17 (10/05) Baño de sol de dos horas. Día 18 (11/05) Baño de sol de dos horas Día 19 (12/05) Riego 750 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l - pH 6.2 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Start of week 5, the smaller plants are taking forever to uptake the water I think that's really caused some stunting 🙁 anyways just gonna let them dry off and refill, see what happens. All of the big girls are looking nice and being fed daily. Clones have started showing some beautiful roots and I can't wait to run a full batch of clones in here. Yeah so it's 9/21 last night I checked all of the clones and 100% have fat white roots popping out the bottom of the Root riot cube so I guess it worked, I filled some one gal pots today and got them all transplanted. 9/24 all clones are looking good, LSD is thriving in the flower room, smells amazing and sticky as can be, seems like stretching is over.

Topped on October 27. LST October 29th. Everything seems to be going good so far

The plant's buds are showing more pistils, and the aroma has become quite fragrant, a creamy scent. Trichomes are now visible on the leaves. There hasn't been any significant increase in fertilizer this week; I've only doubled the amount of fermented banana peel liquid. I also did some foliar feeding with a light spray of fermented banana peel liquid. The daytime temperatures are very hot, and the humidity is low. I've noticed a few whiteflies, but the plant's strength is good, so it's not a major issue. Airflow is also good, being outdoors. The UV index has been between 7 and 8 this week.

The smell of the Fruity Donutz is getting stronger by the day. It's nice to see how different both phenos are developing. One turning into a trichome covered hash plant while the other lady is growing big purple buds. I water them 2 times per day and they're really thirsty. Going from the strain description they have 2 weeks to go now before harvest, but as always I check the trichomes to see when they are at their top potential.