This week was amazing guys. I literally watched the buds getting fat day by day. I am still feeding with a similar program and adding Aptus Regulator once per week to boost silica and some other minerals like molybdenum and boron. I'm flowering my plants in a hot environment with CO2 boost. PPFD is high to support these settings and thankfully my the pots aren't getting hot. No fungus gnats or any other pests, no root rot and bad smell. Everything is perfectly neat and buds are exploding. My expectations from this harvest is really high and I'll keep adding CO2 for another week. Some fellow growers asked for CO2 and PPFD measurements. I am sharing these information on this week's pictures. I got my CO2 meter fixed and I tested the CO2 PPM in different places of the canopy. Typical value for this grow tent with this CO2 setup is around 1100-1350. Temperature is fluctuating between 28-31 and the average PPFD on the bud sites is 1100 micro moles. I'm sharing CO2 measurements right under the fan, where you expect it to show the lowest value. Then I'll also share the CO2 PPM value coming out from the air pipe, which is normally attached to the grill of the fan. Direct output is now around 5500PPM and in the first two days, the meter shows 10000PPM which is the max value that it can reads. This bucket yeast CO2 reactor lasts for four days and I'm refreshing the mixture twice a week. This is huge CO2 with a fairly low cost compared to propane burners or CO2 tubes. Edit: I refreshed the CO2 bucket today and got you guys a video of the direct output. The system is outputting more than 10000PPM of CO2 and the meter can't measure it for the first two days. This CO2 method is a killer one for tent grows. Very low cost for very high CO2 concentrations. Hope these information helps. Happy growing 💪

The generous use of fertiliser in the last few weeks has done wonders for these plants. 🌱🔥 We’re now entering a stage where I’m quite happy for them to start using up the nutrients stored in their remaining leaves. I won’t stop adding fertiliser just yet, but I’ll reduce it to once a week. Since they’ve already progressed quite far, I’m not too worried about signs of deficiencies at this stage — it’s all part of the natural fade. Looking forward to harvest in two to three weeks! 😎✨ Stats so far: 💧 Watering: 1.5L every other day 💦 Humidity: ~55% RH 🌡️ Temp (lights on): 22–26°C 🌡️ Temp (lights off): 20–22°C 📈 Avg. VPD (lights on): ~1.45 kPa

Heeeey all! Sorry for the extremely slow update! The past few weeks have been crazy for me! 😱 This week I made a lot of defoliation and decided to be somewhat greedy. I'll let the plants grow a bit more so they'll stretch well during flower! So while I defoliate I'll allow the plants to recover properly! 💪 Near the end of the week I also made another mistake with Roko (poor baby! 😭). I broke another of the stems (the one that divided the plant in two, right in the middle) and I feared the worst! But so far the plant kept growing without any problems. I'm still thinking a name for my 4th baby, she has surprised me greatly and I didn't notice how many new branches had grown until I defoliated her and I'm sure she'll deliver some great buds! 😍 Anyway everyone, this is all for now. Thanks for reading this journal and soon I'll update the next week! 😃

Everything is going great except the RQS is twice the size of the the Cherry Cola lol. Ended up setting the one plant up and raising the light some.

Enfin arrivé à maturité 😅 mon plant n'a pas eu le temps de fleurir à l'extérieur avec l'arrivée de l'hiver peut être du au LST. Après juste 4-5 semaines sous tente celle ci a fini de fleurir magnifiquement ! Hâte qu'elle sèche pour tester ce classic.

Beautiful plant mold resistant keeps on stretching will have nice long colas😋

I lowered the lights to 84cm, use spray to water the plants, increased the humidity to 65%, added a bit of soil and increased the light schedule to 19h. Hope it can speed up the grow

✋Wk 7: Will the size difference begin to fall in line with the predictions, and rearranging the wind. 👉 This week is Day 48 thru Day 54 total. (Feb 16 thru 22). Today (day 54ttl) the 1 gallon plant is at day 21 flower and the 3 gallon is at day 9 flower. 👉 This week has shown some interesting things. The 1 gallon plant is still ahead in the physical timeline, and has also started to demonstrate how the smaller pot is limiting its size. The 1 gallon has been ahead of the 3 gallon plant in size and stature, until this week. The 1 gallon has stopped stretching and is beginning to develop its flowers. I was worried it would continue to get bigger and may become an issue vertically as well as horizontally. The 3 gallon plant has grown a few inches and isn’t really stretching up yet, but it is growing overall in size. It’s a big dome of leaves right now. Its main cola is same height as a couple of the secondary branches. I doubt the main cola will remain the same but this plant hasn’t been typical from its germination so only time will tell. 👉 The other interesting thing has actually been trending this way for a couple of weeks…the run-off for both plants has been lower than the inflow and no low EC fertigation has been needed. The 1 gallons roots are undoubtedly densely packed in the pot. It takes several minutes to apply the nutrient solution. The volume needed has also increased. The 3 gallon still readily accepts the solution, but it takes more every day and the run off takes longer to start running out of the bottom. The saturation level of both pots has increased, and the 3 gallon especially. The EC for both has stayed below the inflow EC. This is unusual because part of the volume of water in the pot when saturated isn’t absorbed by the plant, it evaporates on all sides of the pot and the top of the media. This would leave the dried nutrients wich would rinse off at each fertigation adding to the TDS. The reduction of EC in the run-off means the nutrients are being utilized by the plant. I have dropped the inflow EC of the 3 gallon a little because I was worried about burn. I have kept the EC of the 1 gallon plant at the low end of the recommended EC range of the General Hydroponics drain to waste nutrient schedule chart for the Flora series of nutrients. I use the entire line of these nutrients. For the one gallon I had been giving it only the “simple program”, and the 3 gallon the “expert” (entire line). This week when I noted that the stretch has pretty much ended for the 1 gallon, and decided that I will go ahead and give it the expert mixture as well but given at the low end of the EC range still. Ive included the Fertigation log for the week. It shows the tent temps, the outdoor temps and HVAC setting. Also, I note when a fresh batch is made and what week on the schedule it is. Each pot has the recorded time of fertigation, volume, pH, and EC of the solution given and the corresponding run-off. I mix the solutions at full strength and use a solution with just silica and Cali-magic to reduce the EC to the desired EC. I mix that in at fertigation time. I also adjust the pH if necessary at this time. 👉 The structure of the 1 gallon is very stout main trunk, and each branch is very sturdy. The bigger fan leaf production has given way to smaller leaves. The structure of the 3 gallon also has a very stout main trunk and each branch is very sturdy. The 3 gallon has some very large fan leaves and it has lots of vegetation. Its very dense and hard to peer inside. For both plants I have begun to selectively remove branches that would not be producing anything but larf. The 1 gallon only needed the lowest main branches trimmed. I also removed some of its smaller shaded secondary branches and leaves inside the canopy. The trimming on the 3 gallon is similar, however its much harder to get inside. I just do a little at a time at each fertigation. Im not sure if the first set of branches on the 3 gallon will be tall enough to keep but I want to wait till the plant starts stretching to see what they will do. Ive left as many leaves as possible in the 3 gallon…a lot of really nice fat food factories. This plant may go very large, or it may stay somewhat stunted as it did during the early veg phase. 👉 I positioned the plants I closer to the back wall. I bought a oscillating tower fan and was hoping it would be a good addition to the tent. Alas, it had too strong of a wind current (on the lowest speed) and the 1 gallon was showing signs of wind stress after 2 days. So I removed the fan and re-positioned the smaller fans I had clipped up top of the tent. Both fans are now hanging lower on adjustable ropes and point toward the plants. They are working well like this and the air flow is good. I may modify the oscillating fan and install a variable resistor to the fan motor to reduce the flow. I have added the branch support to the legs of the stand the 1 gallon is on. These posts will be used to support the weight of buds or position them as needed. I will add the support posts to the 3 gallon plant after it has gone thru its stretch, maybe another 2 weeks for that.

A lot of problems with run off PH It drove me crazy, and i gave up Now is aprox 6.5 and i will see how it will go

She looks as healthy as her sister,she's happy,no issues at all,and starting to show the first pistils on August 24th.let's see how this wonderful strain performs. 😊💚🌱

So I'm flushing this week, Sunday I used Flawless Finish and watered heavy early, and did a 2nd plain ro flush 6 hours later, I did the same thing Monday. Tuesday I did not give any water at all, Wednesday I flushed the same way with Flawless finish, but water 2 times after that night, I let everything dry Thursday and Friday, It is Saturday, Today I have used only RO water, I am done adding anything. I think I could call it good, but I am going to keep things going after today, tomorrow/Sunday, and Monday, I will not water again, Tuesday the light will not even come on and I will give it a couple days of dark to finish. I could use some tips on how to get some better pics. I try, I really do, but I'm not getting the pics my eyes are seeing, so in the center of the area is all yellow and marooning leaves, and the buds have a pink tint in that area. The trics are getting there, but not yet, I figure by end of week they should be right... almost all cloudy now, a few clear left, but barely any, the few amber here and there, but I'm also not taking a piece to check from the top either, I gettin a look at a few small little buds, near the top, but not the top, I feel like I'm close... , So anxious had to phone a friend to tell me why to wait today... lol, I'll test my runoff ppm's tonight just to be sure, but the way the coco is taking the water makes me think its clean. I'm always ready at the end, Garden of Green seeds have ALWAYS made me look like a great grower. I'm excited, The smells, is very strong, it has a sweeter smell, next week I should have harvesting pics... Thanks for checkin it out

🌸🍏✨🍭🌸🍏✨🍭🌸🍏✨🍭🌸 Harvest – Apple Fritter (Kannabia) 🌸🍏✨🍭🌸🍏✨🍭🌸🍏✨🍭🌸 Chopped on 05.09.25 (FW9) after a clean 9-week flower. Didn’t weigh every single gram, but what I trimmed wet came out to 939 g+, and there’s still some left unweighed. Dry yield will land somewhere in that ~quarter-kilo zone once everything’s cured. She finished with 14–16 solid mains, stacked up dense and resinous. Scissors got glued quick, buds are heavy, sticky, and already giving off that sweet fruity/pastry smell Kannabia promised. Had a couple bumps (bit of bleaching during stretch, thrips halfway through), but she bounced back fine. Easy to train, forgiving when stressed, and filled the tent nicely. Super happy with this one — pressing part into rosin and slow-curing the rest for the jars. 🍏🍪🔥 Ps rest of grow info in week 20

Week 3: Vegetative Growth and Care Welcome to the fourth weekly update of our cannabis cultivation journey in Germany! As we move into the third week of vegetative growth, our strains—Pulp Friction, Cookies Haze, Eleven Roses, Poddy Mouth, Critical Lemon Kush, and OG Kush—continue to thrive. This week, we’ve focused on maintaining optimal growing conditions and further refining our Low-Stress Training (LST) techniques. Key Developments: 1. Enhanced Vegetative Growth: - The plants are showing significant growth, with lush, green foliage and strong stems. - The 18-hour light and 6-hour dark cycle continues to support their healthy development. 2. Continued Low-Stress Training (LST): - We have adjusted the LST ties to guide the plants’ growth, ensuring an even canopy and maximizing light exposure. - The plants are responding well to LST, with multiple branches growing vigorously. Steps Taken: 1. Monitoring: - Maintained temperature around 24-28 degrees Celsius and humidity between 50-60 percent. - Kept the soil consistently moist, watering when the top inch of soil felt dry. 2. Nutrient Management: - Continued with a balanced nutrient solution to support vegetative growth. - Monitored the plants for any signs of nutrient deficiencies or excesses and adjusted the feeding schedule as needed. 3. Adjusting LST: - Gently repositioned the LST ties to ensure all parts of the plants receive adequate light. - Avoided over-stressing the plants by making gradual adjustments. 4. Pest and Disease Prevention: - Regularly inspected the plants for any signs of pests or diseases. - Maintained a clean growing environment to minimize risks. Next Steps: - Prepare for the transition to the flowering stage, which will begin soon. - Continue to monitor and adjust the environmental conditions and nutrient regimen to support healthy growth. - Keep an eye on the plants’ overall health and make any necessary adjustments to the LST setup. Stay tuned for next week’s update, where we’ll discuss the transition to the flowering stage and the care practices involved. Feel free to ask any questions or share your own experiences in the comments below!

Everything is really going well this week not changing much at all just trying to keep an eye on the last few weeks

Week 2 Early Veg ******************************************** Light cycle=18/6 Light Power=90w 37% Extractor controller settings High temp= 26c Low temp= c Temp step=0c High Rh= 69% Low Rh= % Rh step=0% Speed max=8 Speed min=1 Smart controller settings (during lights on). Lights on=4.00am Humidifier on=-60% Humidifier off=+65% Top fan on= +24.5c Top fan off= -24.0c Smart controller settings (during lights off). Lights off=10.00pm VPD aim=0.4-0.9 DLI aim=14-18 EC aim=0.2-1.0 PH aim=6.0-7.0 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= Autofeed 1 dripper. Feed=Veg Nutes Neutralise=.1ml/L Grow=2ml/L Roots=5ml/L Volume=1L Easy Ph down= 0 drops/L Ec=1.0 PH=6.0/6.0 Runs=6 Run times=1min Gap times=15min Total runtime=6mins Total flowrate= 30ml/min (15ml/min each) Auto start time=5.00am Auto stop time=6.05am 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** 📅26/5/24 Sunday (day 8) 📋 Away 📅27/5/24 Monday (day 9) 📋 Away 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=nutes Volume=4L Ec=1.0 PH=6.0 Volume left=L Volume used=L Volume each=ml Runoff. Total runoff=0 Ec=PH= 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 📅28/5/24 Tuesday (day 10) 📋 Away 📅29/4/24 Wednesday (day 11) 📋7.00 Pm back home. Filled humidifier H=9cm D=59cm Dli=16.7 Ppfd=258 She is working on her 4th set of true leaves. I'd say for 12 days old she is a bit ahead in development. 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= manual Feed=nutes Volume=0.2L Ec=1.0 PH=6.0 Runoff. Total runoff=0.1L Ec=1.95 PH=6.4 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 📅30/5/24 Thursday (day 12) 📋 Sort the environment out. 📅31/5/24 Friday (day 13) 📋 Prepared 12L pot for transplant. Tested drip system, 5 drippers. Flow rate 0.13L/min. 0.065L/min each plant. Ran 4L water through each pot Ec=0.2 Ph=6.9 Runoff 0.7L Ec=5.4 Ph=5.4 📅1/6/24 Saturday (day 14) 📋H=10cm D=58cm Dli=17.7 Ppfd=274 Transplanted to 12L pot. Removed Humidifier from tent. Raised light. H=10cm D=53cm Dli=17.5 Ppfd=270 ******************************************** Weekly roundup. 📋 So far she is looking great and really is developing at a good rate. I'm wishing I'd picked another Fastbuds strain to accompany this one in the grow as this is really showing the other strain how it's done. Just about keeping on top of the conditions at the moment. Bit fucking warm. Take it easy. Back soon. ********************************************

Week six and everything is doing alright im excited as always to see what the plants will do. Autoflower seeds are pretty awesome this is really my test run and the next grow im gunna do a few more plants and a couple different strains.

the plant continues to stretch throughout this week. slight increase in flowering and growth feeds.some defoliation this week. good week everyone 🙏💚🌱

Flowering day 22 since time change to 12/12 h. Hey guys :-) Another great week that is over. They all develop exactly as it should be 💚. Since the last leaf and substrate application against tripse, I finally haven't seen any of the little biters 👍. Watering was done twice this week with 1.3 l each time (see table above for nutrients). The lowest shoots were removed so that the energy is not wasted in the lower part :-) . Otherwise, as always, everything was cleaned and checked. Fresh osmosis water was filled with stale tap water in a 100 L tank for the coming week 👍. Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany