.

Flipped on week 6 12/7

100%

MIMOSA by ROYAL QUEEN SEEDS Week #20 Overall Week #3 Flower This week she's doing good just starting to flower so that's always exciting to see no issues this week she's healthy!! Stay Growing!! Royal Queen Seeds MIMOSA

These have been growing kind of slowly but I got the temps up a little this week by adding some extra light and am getting vpd dialed in. These will only be in this tent for a few more days I am just starting to harvest the main tent so once that is done they will be moved to the Gorilla Grow Tent and put under the new Growlightscience LEDs so we can see how the perform full cycle. The autos will have to get moved back into this tent once I flip the main tent but the photos will prob need a few weeks of veg before that happens. Been doing foliars with the Growzyme from greenbuzz as well before lights out every other night which seems to make them happy. I think theyll take off over the next couple weeks.

my dry and cure style is this: 4 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 4 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. buds are one of the hardest as fucking rocks type of buds! very dense , compact , sticky , smelly , amazing at every aspect growing stage was 56 days and flowering stage was 75 days total (harvested tops at day 64th) the total weight of dry buds was : (plant #1 & #3 top buds 56 G + lower buds 22 G ) 78 G + (plant #2 top buds 47 G + lower buds 18 G ) 55 G + (plant #4 top buds 120 G + lower buds 67 G ) 187 G = 367 G

Welcome to GhostGrow Chapter One by PoshGrow! 🍀 Grow start: 2020 April 26th. 🍀 Seeds germinated: 7 🍀 Success rate: 100% 🍀 Strain: 5 Alaskan Purple Auto by Seedsman 1 Blueberry Auto by Seedsman 1 Lemon Auto by Seedaman 🍀 Breeder: Seedsman 🍀 Led: HLG 260w Rspec QB Kit 🍀 Grow tent: 3x3x6ft or 1x1x1.8m Planted Alaskan Purple to 5gal fabric pots ( all AP goes around tent edge), Blueberry to 3gal fabric pot ( strain in the middle) and Lemon to 7gal fabric pot ( largest pot in the bottom lane). Sprauted fast and really healthy, everything went perfect. Watered when needed, every other watering I used Fox Farm Big Bloom nutriens 30mL per 1 gallon ( as they recommend at their official Soil Feeding Schedule).

5/13/22 - 5/20/22 5/14/22 Today my Poison Zkittlez got her Zamaldaberry room mate to move out so that she would have more space. She is trying to fill this 4x4. I did some defoliation and leaf tucking today to help open up those inner branches. 5/16/22 Today my girl got some defoliation and her resivore topped off at 3 gallons needed after 3 days. She is doing great and her flowers are getting beautiful 😍 5/20/22 Today marks the last day of week 3 of flower for my Poison Zkittlez. Topped off her resivore 3 gal. Did some minor defoliation of some inner leaves.

Hi Growers. So all 3 FastBuds Pineapple Express Auto seeds popped in less than 3 days. I’ve left them uncovered, added a humidifier and turned a fan on low to just to give them a little wiggle. They were sprayed and lightly watered in a 4” circle around the stalks to have those roots go search for water. Just gonna give them some time and mist for a week and start super low feeding according to the FastBuds auto feed schedule. I’m looking forward to seeing these babies grow!!! Happy Growing 🌱

Havrested a bit before just becouse i needed to have a harvest before the full one

Es wird langsam großartig🌱🌿 Die Trichome Entwickeln sich immer intensiver. Mein Bonsai im Living Soil. 🌿🌱🐛

I don’t know why I took so long to grow a lemon haze strain, I wanted to do it forever, and it turns out to be a great decision! I love everything about it, the lovely smell, the intense green, the awesomely pleasant feeling of inhaling and the high overall! Great strain!

New Setup in new location after last weeks incident, no longer tented but has nice white walls luckily too distribute that light. The gals are looking healthy, however one of them is lagging behind so im assuming shes going to yeild alot lighter, too urly too say for sure tho ,always have faith in the runt :)

☘️06/04 - Estoy utilizando el método que recomienda BSF Seed para la germinacion. ☘️Dentro de 24hs voy a ponerla directamente con papel para que germine y poder colocarla en su maceta. ☘️En estos dias estaré subiendo más imágenes. ☘️07/04 - Coloque la semilla germinada en el sustrato, antes de meter la semilla le agregue AEGIS Microrrizas, sirve para una mejor absorción de agua y nutrientes del suelo, proporciona a las plantas importantes beneficios,etc. Es muy bueno y siempre lo utilizo de este modo. ☘️Estoy utilizando una maceta de Root House de 10L. ☘️El sustracto que estoy utilizando se llama Nube Verde, la composición que trae es: turba de categoría, perlita, humus, compost, tierra, dolomita y verticalidad. ☘️La plantula ya brotó, todavía sigue teniendo por lo que veo pedazos de cascara, en estos días se caerá. ☘️Por el momento tiene buen aspecto. ☘️El 25/04 ya entra en etapa de crecimiento. ☘️En el día de hoy 19/04 esta midiendo 3cm. ☘️En estos dias subiré más imágenes de como viene.

***Update*** have switched 2 of 3 to 5 gals will do the other one as soon as I get more coco..looking to veg maybe another 2 weeks then going to flip. Recently acquired LED light for my veg room so have 250w hps n 300w LED..ladies seem to be loving it.

1/11/2024 Vegetation Week 1 Day 1- I have a root almost in the water.. Yay!! Top feeding is almost done. she is looking a little sad as I work the transition Top feeding but once the roots are fully in the water she will start to take off. Ensured my PPFD is set between 250-300 it is set to: 258 1/12/2024 Vegetation Week 1 Day 2- I have a root in the water.... NO TOP FEED TODAY SIR!!! now that a root is touching the water and she looks stable, I am not going to topfeed, I will see how she looks tomorrow and as long as everything looks good I am going to go ahead and do a change and week 1 fill on Nutes.. I know it is a couple of days in but the same Nutes go through Week 2 and get changed at Week 3 So I should be good to go.. I will just ensure I fill to root touching the water when I change tomorrow. 1/13/2024 Vegetation Week 1 Day 3- Water Change Day!! I added 36 Gallons of Water to the system: Silica= .5mil/gal= 18mil CalMag= .75mil/gal = 27mil FloraMicro=3.0mil/gal = 108mil FloraGro=2.0mil/gal = 72mil FloraBloom= 2.0mil/gal = 72mil PH DOWN= 30mil Very important thing with this system is to now wait the 24 hours for the system to adjust.. Do not make any further adjustments to your PH up or Down for 24 hours to allow time for the system to balance. 1/14/2024 Vegetation Week 1 Day 4- Today I just adjusted the PH to ensure that it was right at 6.0 1/15/2024 Vegetation Week 1 Day 5- Today I Cleaned up the lower damaged leaves from the transition from top feeding to roots in the water. She looks good today. 1/16/2024 Vegetation Week 1 Day 6- Today I just took a picture of the beautiful lady for Log. Other than that just normal day to day operations, check the pH, check the Humidifiers and fill as necessary, check level of water in the Res. Everything looks great. onto Tomorrow!! 1/17/2024 Vegetation Week 1 Day 7- Today I filled the humidifers, checked the PH and just let her grow.. Grow baby Grow.....

Día 36. Estamos en 6ta semana. Los esquejes se atrasaron debido a que han sido días muy fríos y no he logrado enraizarlos. Decidí poner el extractor de aire junto con la bomba de aire, así solamente se prende 15 minutos cada hora. Así estoy logrando temperaturas mayores a 24°C en el indoor y así voy a lograr el enraizado. La planta ya tiene un tamaño que ocupa casi todo el indoor. Pero lo importante es que la voy guiando y ya estoy proyectando como va a ir cada rama. El tamaño va a exceder lo que esperaba, pero aún así creo que si logro lo que tengo en mente, voy a sacar muy buenos resultados. Igual no me voy a arriesgar demasiado, así que si contando 10 días desde ahora, no logro que los esquejes enraicen, voy a pasar la madre a floración sola. Cómo pueden ver, las ramas están bastante gruesas, y el la ramificaciones van ganando su lugar cada una. Las raíces son demasiado grandes, aunque sé que voy a poder poner la planta en el sistema de arriba igual, aunque me voy a tener que ayudar de algo para meterlas. Es importante no utilizar las manos, ya que se pueden transmitir muchos hongos. Voy a seguir actualizando e ir viendo que pasa. Pero ya estamos en los últimos días de crecimiento, haya o no esquejes. Incluso puede que ya pase la planta al indoor de arriba para darle mayor libertad de crecimiento. Esto me va a servir para tlmar en cuenta en la próxima camada que se vendrá. La idea de esto es hacer las cosas rápido, y no en gran tamaño. Pero siendo que ya estoy en el baile, no me queda otra que bailar. Día 40 Los esquejes no estaban enraizando, así que decidí cambiarlos de lugar y los puse arriba de la luz, donde les da calor y luz tenue. Espero que ahora si agarren. Y hoy fue el gran día, pasé la planta madre al módulo de arriba. Pero lo voy a dejar una semana más creciendo. De esa forma veo si los esquejes llegan a agarrar a tiempo. Y además tuve un problema en el trasplante. Primero que la planta se hizo más grande que lo esperado, y la raíz también. Cuando la pasé, hubo contacto de la raiz con prácticamente todo lo que había cerca. Sumado a que se enredó en el oxigenador, así que quedó una pidra difusora en la raíz. Dado el alto riesgo de haberla contaminado con algún hongo, le puse una solución de agua con agua oxigenada, recirculando continuamente, para lavar las raices y de paso bajar el stress de teansplante. Mañana veremos cómo arranca el día. En el aprendizaje me llevo que en la madre, es mejor hacer un corte en el primer nudo, o dejar las ramas del segundo y quitar las del primero. Y así que queden sólo dos ramas, para luego dejar a los esquejes en el medio. Eso planeo hacer con la próxima variedad. Entre tanto ahora sólo me preocupa que la raíz no se haya contaminado en el traspaso. Ya en 8 días estaré pasando a floración si no hay esquejes. Si llegan a agarrar, habrá que dar unos días de crecimiento hasta que alcancen a la madre en altura. Pero ya está todo en definición. Ahora sólo queda esperar y seguir guiando a la planta. Ya tengo ganas de poner la próxima, pero falta bastante para eso. Tengo 10 semanas de flora, así que recién en 5 semanas voy a poner la nueva madre.

💫The week went great. After the first stress, growth seemed to slow down, but it worked out, the plant began to expand. I water it every 3 days. I continue to bend the stem along the axis of the pot. I bend the branch that will pass through the fastest. 💚I started giving supplements late. Only on the 33rd day I gave him fish and everything else. 🍀 Week showed good growth, but it could have been better, let's see what happens with the additives. I continue to twist the stem in a circle (I don't know where to twist it). And I also cut off the leaves a little bit, about once a week, as they block the light (a friend says not to overdo it with defoliation, let's see what happens).🍀