Week 12 pushed the Bruce Banner plants even closer to harvest 🌸❄️ The buds gained more density and weight, and all plants looked very mature at this point. Trichome development showed that #2 and #3 were clearly entering their harvest window. Most trichomes were milky, with some amber already visible, especially on the main colas. Because of this, I decided to give them a little more time to fully ripen. #1 was still slightly behind in maturity and will remain in the tent longer, while #2 and #3 are planned for harvest soon. Due to the heavy buds, the plants needed continued support to stay upright. Despite the weight, all flowers stayed compact and healthy with no signs of rot or stress. Watering this week was kept simple with RO water + CalMag only, no additional feeding. Environment: Temp ~24°C RH ~50–55% Overall a very controlled and smooth late-flower week. The plants are clearly finishing strong, and harvest is right around the corner ✂️❄️

week intel: we reached the peak of flowering stage and need to cause a little more e.c stress from this week so e.c stress is twice a week i reduced the amount of Nitrogen and calcium and stopped feeding silicate in other hand i raised the amount of base nutrient and booster short story version: more K & P - less N stresses : a little E.C stress around 1 and 1.2 twice a week from this week feeding: i feed them 3 times this week with this order : day 1 : i feed them high with base nutrients(calcium & micros (half dose) + Bloom) about 566 ppm - 1.1 e.c to cause a little stress. day 3 : i feed them low dose of Top-Max + B-52 around 392 ppm - 0.7 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them high dose of Feeding Booster around 630 ppm - 1.2 e.c to cause e.c stress again guide of the week : e.c stress if done correctly is one of the very few ways to increase quality in all aspects ( color , aroma , taste , bud structure , resin contents ) but if you over do it , listen carefully brother : it can reduce quality in every aspect so always look for signs and never reach the red line

Wow honesty i didn't think the SpiderFarmer SE3000 are this good and with right soil and nutrution the spark good especially this Purple Punch Auto from Barneys farm, i really look forward to see those buds finished. I defoliated a lot actually ill let the other plant with a lot of leaves but this one i wanted to try to start cutting the big leaves to give less shade and more energy for the buds, i didn't top it aswell. But then for the mistery pack seed from Fast buds is doing very good. Well for the marking on the thick Indica leaves i am impatient to see what will happen honestly. So not like the other one she got topped and had a slower growth but now its getting better, ill have 2 indicas ready to cho soon enough ! Now the Purple Punch nutrients will change to bloom and i will add calmag aswell, the other one will still have the veg nutes but now the leds are at 80 percent power which will push into flower so soon i will change the nutes again. Happy growing !

Grateful to have the homie along on this journey. Moving the seedling tray from the greenhouse to the tent. On May 20th the homie GbaGrow cleared some spaced and welcome the new genetics to their new home. The goal is to between himself and I to identify the females, and created an environment to thrive in cultivation with the Holistic Approach. We will be showcasing various videos same species but in different environments, cultivated by different breeders, same team. RP (Me) RPB1 @GbaGrow MAY 23rd Is a visual update, the plants in the trays have been moved into individual solo cups. #StartedWithASolo We are excited to see what the future beholds. We are on to something, an unknown haze. Looking forward to feedback

Day 56 of70 flowering: I was going to harvest during this week as she has hit the 8 weeks i read is her cycle. I then read another that had her as a 9-10 week flowering strain !!!. Looking at her now , she looks like another week would be possible for her as she doesn't quite look ready. Her buds are fairly loose and airy butshe doesnt have the size or bulk of her mother at all. better looking to a pint but nowhere near the size on her mains. She smells nice and fruity up close and had a few trichs starting to sprinkle around the leaf sets now finally. I dont think inwould grow this strain again as it has been major dissapointment both times i tried now. Lets see what she yields ?. UPDATE DAY 57. following good advice from Silky smooth , i have nipped the top few pistils of the main buds to encourage some girth hopefully. Thanks Silky

With no doubt these plants have not produced much more quantity and density of buds due to the 2 serious mistakes I've made (those who have read the weeks will know what I mean). However, I can say that I am happy with the production obtained given the mistakes made. Between the 2 plants, the one that has produced more and generated the most dense buds has been the Gorilla with the Man-lining technique applied, it has also loosed a bit less weight drying than the non man-lining one. In comparison with the Money Makers with which they have grown the result is the same. Both Gorillas have each produced more than any of the Moneys comparing them 1 to 1. Also buds are a bit dense than the moneys, but none of them is really desde at all. *****ESPAÑOL***** Sin duda estas plantas no han producido mucha mas cantidad y densidad de cogollos debido a los 2 graves errores que he cometido (quien se haya leído las semanas sabrá a que me refiero). No obstante, puedo decir que estoy contento con la producción obtenida dados los errores cometidos. Entre las 2 plantas, la que más a producido y ha generado cogollos más densos ha sido la Gorilla con la técnica de Man-lining aplicada, y también ha perdido un poquito menos de peso en el secado que la otra. En comparación con las Money Maker junto a las que han crecido el resultado es el mismo. Las Gorillas han producido cada una más que cualquiera de las Moneys comparándolas 1 a 1. Así mismo, los cogollos de las Gorillas presentan un pelín más densidad que el de las Moneys, aunque realmente ninguna de las 4 plantas ha generado cogollos densos del todo.

This is a perfect strain for a beginner as it’s so resilient but also good for a more experienced as she can be topped and trained and have huge colas. I would recommend everyone grow Grapefruit 🌱🌱🌱

03/13/2022 Love the colors on Grape Skunk #1 others are not as purple, again i forgot Biscotti Skunk and lemon og. 03/14/2022 Uploading Biscotti Skunk pic's I'm really loving 3 particular girls this run,all plants are exposed to PW intentionally I need girls that can take PW with no issues and three plants are spotless. The first is the only Biscotti Skunk that was female of 5 cloning for outside run but will do great in basement without PW issues. The second is lemon og spotless, and the third is the grape skunk thats got most color the second tallest of the grape skunks, cloning for testing in New England zone 7 should get at least one if not all 3 to finish before cold sets in.

Day121 31/03 Defoliation. Day122 01/04 Continue Def. Day122 01/04 4lt ro water -16ml Finalpart terra. Total 675 ppm, ph 6,0 No Drain. Day124 03/04 RinseOut Day 5lt ro water -5ml sensi cal mag extra, Total 200 ppm, ph 6,1 Drain First measure 600 ml, 1050 ppm -Second 1000 ml, 900 ppm - Third 300 ml, 820 ppm. Day127 06/04 5lt ro water -25ml Finalpart terra, Total 740 ppm, ph 5,9 Drain 1500 ml, 900 ppm.

Primera semana del seguimiento...damos por iniciado éste nuevo cultivo!!

19 plants down.... all tangerine skunk clones, and 2 others CF3🍊 x SFK and 🍎Apple Sundae🍏 from seed..... 21 and done That was the most I have ever finished in the greenhouse, I over loaded my system.... that is for sure. I battled PM and mites. But I kept them in check. And I WON... winner winner chicken dinner. So I chose chicken enchiladas!!!! I got a couple grams.... and I shut the greenhouse down.... I guess I should do a harvest even though this diary is not complete. I will never give an honest weight 😈... I tell you that now. But I will weigh one plant, for the average. Just for my own knowledge. 🤗 It was a great run 🤩.... every bit of it is 🔥🔥🔥🔥🔥🔥🔥🔥🔥 😁 I couldn't be happier 😁

I switched the timer on 12/12, i will do not defoliation for 2-3 days and after i will do it, no too massive but i want have as much light i can in the second bloom week. Half week: I modified the layout of grow room, I putted the vertical net behind the tube to earn more space for plants. End week: I did the first of the last 3 defoliation . The plants has a lot of shoots, it hard to arrive to cut the 3 plants on the back, i decided to cut only the leaves and try to have more shoots possible

Apollo F1 had to come down due to bud rot. These videos were taken n June 10 and at that time no bud rot was visible. We've had so much rain this spring season with limited fully sunny days. I harvested June 14. The main cola was full of bud rot. That's how fast it can spread.

The girls super thirsty EC spikes when they drink so much water from 2 to 3.8 EC.

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 51 since time change to 12/12 h. Hi everyone :-) . The buds get bigger and bigger. I think the next 14-18 days will be harvested because the trichomes are already 70% milky, 10% amber and 20% clear. For the next 9-13 days you will rinse with Canna Flush. I wish you a lot of fun with the update. Stay healthy 👍 You can buy this Strain at : https://www.zamnesia.com/de/4532-zamnesia-seeds-gorilla-glue-feminisiert.html Type: Gorilla Glue ☝️🏼 Genetics: Chem's Sister x Chocolate Diesel 50% Sativa/50% Indica 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

------GENERAL COMMENT------ Girls are moving forward without troubles, i'm pleased not having to deal with issues. I'm breaking down the feeding schedule like: Sensi Base + Bigbud*(or pk booster) + Recharge > VeloKelp+Natures Candy+Bigbud*. So there is constant feed, every other day mixed in 1.5l water. Once a week i give Cal Mag 2ml /l. Not touching the girls with any HST or stress since I switched to flower. Is the first time i'm running recharge from the beginning to the end, have to say that is solid. ------SM.BB COMMENT------ Slightly turn off because there aren't loads of colas as I got used to. Lets see maybe this 10 colas will surprise me lol 😎👍

Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?

Last week before flushing🌈