17.3.25: So I watered with 2ltrs of dechlorinated water PH'd to 6.4 with 4ml Xpert Nutrients Cal-Mag amino acids. I have really overdone the nutrients, I got carried away 😅 To try and rectify the situation, I've cut everything out except Cal-Mag amino acids. I will try to just stick to this with some Biosys, but I'm running out of that now, too. Anyway, with Or Without, I'm sure it'll balance out. Fingers crossed 🤞

week intel: we getting close to end of ripening , this week i raised drought , Nitrogen and E.C stress by feeding them 2 times per week and raised e.c to 3 to cause real stress that will help increase terpenes production stresses : Nitrogen deficiency Stress by removing the fertilizers that has N in them Drought stress via removing one meal in week high E.C stress around 1.7 and the other feeding day 3.0 , 2 times a week feeding: no more Nitrogen i feed them 2 times this week with this order : day 1 : i feed them high with Bio-Bizz Top-Max + Feeding Booster about 850 ppm - 1.7 e.c to cause a medium e.c stress. day 3 : no more feeding this day day 5 : i feed them very high dose of Bio-Bizz Top-Max + Feeding Booster around 1500 ppm - 3 e.c to cause high e.c stress guide of the week : be patient in the last weeks, never hurry for harvest because its the time of ripening in last 2 weeks you should let plants to do their work last weeks of ripening is the time to break the limits we should cause 3 stresses as i said above Nitrogen stress , Drought Stress , E.C Stress

9/15 - I missed my 4 week feeding of my Purple Microdots 😑 Didn't catch that mistake until I noticed some yellowing. Ugggh. But, I gave them each another feeding of Bad Bunny Nutrients, as well as some @rootsorganics Uprising Bloom & Foundation for that added boost now that they are well into flowering. I also watered them with my Roots Organics Terp Tea Bloom Compost tea that I brewed for the ladies in Flower in the 8x4 tent! So, now they are bouncing back and becoming green and lush again. 9/18 - All four are coming along nicely. They are very low maintenance and are well into flower now. These Purple Microdots continue beat all my other autos to the punch and she continues to hit EVERY milestone weeks before the others as well. She's quickly becoming my favorite auto to grow. I've decided to pop a few more seeds, identify the female, then plant one in a 3 gallon pot to see what she can really do! 9/19 - Did a lot in the garden yesterday. Since everyone is in flower, I top fed the ladies with @rootsorganics Elemental for calcium and Seabird Guano for phosphate. Followed this with some RO water and molasses.

Started from seed this lady's have 17 days under half load 4 X 50W Cree CXB3590 CRI 80 3000K custom build led. 7days in rockwool cube under a dome , 10 days in 750ml pot. Freshly transplanted into to final pot. They have received 250ml of fertilizer solution and transplation soil was moisted with 6.5PH water. Led now running on full load. This project have some custom/extra gadget, a prototype growing controler. Hardware Specs: Raspberry PI 4 4Go Ram + SSD 120Go Phat sparkfun qwiic i2c hub + i2c sensor for : temperature,humidity, co2, tvoc, air pressure and distance measurement(plant height) Linked with one custom wifi power bar for schedule and countdown. One sonoff pw r2 for energy monitoring. Both using ESP8266 chip and running on Tasmota alternative firmware. Linked to the controler using normal wifi AP. From Wall|----Sonoff-----Powerbar---: Led, Extraction Fan, Mouvement Fan, and the Rpi4 Software: Exploitation System: Custom Linux Buster Lite OpenHab : Open source domotic software for visualition and automation. Mosquito MQTT +TLS server : Used to publish and receive message/data from sensor etc. InfluxDB : DataBase for data retention Chronograph: Visualisation and transformation panel to analyse our data. Custom python code for running the sensor and publishing result into mqtt channel Chronograph have monitoring panel for now The growroom Sensor AkA spaceship The system sensor and hardware/computer monitoring : Memory, Disk space, CPU load and temperature. In/Out etc. Network etc The database: request per db ,memory heap, disk usage, http request etc. Working : Co2, humidty,temperature, Tvoc, Current,Voltage, Power, Daily/yesterday/Total energy consumption on kWh and $ Planned in version 1.0 : Mesuring plants height using ultrsonic sensor. Adding remote On/Off function on sensor using openhab. Adding power schedule in openhab. Adding basic automatic watering/dosing system, Planned In version 2: Adding relay and dimmer on the custom led to control/dim each cob. Adding custom small emerson effect led based on 3W led. Adding , automatic, PH, PPM and temperature monitoring for water/fertilizer. Adding PAR sensor for light monitoring. Adding soil moisture and PH sensor. ============================================ 2020-05-07 ============================================ Added security cam for streaming with rtsp, working on http conversion for addition in openhab Added snapshot. CO2 sensor down, some resoldering needed. =============================== ================================= 2020-05-08 =============================== Good: Updating fertilizer quantity from 250ml/day to 500ml. Watering planned for the end of the day. 2 days ago i've pinched the head of each plant Internode are booming. Started LST training s to help the lower internode. Bad: Noted some physiological/Nonparasitic leaf Roll on one plant ; humidify level is too low; Humidificator filter is broken, need to be replaced. Monitoring #4 for couples of days.

This week started strong. Some small concerns due to small orange spots appearing on fan leaves which on researching indicates a calcium/magnesium deficiency. Will add a small amount of cal mag to their next feed

In flush mode now

Hello everyone 👋 Week 7 of flower for the Banana Purple Punch auto from Fast Buds 🍌😈 She grew fast with a beautiful color,for the nutrient 4ml/L terra bloom & 1ml/L power buds & Green sensation 1ml/L from Plagron one more time then only plain water 💧 All the top buds are ready for harvest

End of course for this Persian Prince project! Unfortunately, he failed to cut short this flowering a few days in advance following the start of a pest attack. Our two beautiful ones would have certainly enjoyed crunching life with full roots for another week, but prudence forced us to cut a little prematurely. Never mind, our flowers have dried for 10 days and are now ready to begin their maturing period in a jar. Despite these conditions, which are very well known to them, our Persian Princes still present impressive characters: the buds are huge, covered with a thick layer of trichomes and very fragrant. In terms of flavors, cheesy dominates 🧀 the two phenos smell strongly of semi-roller/Emmental style hard cheese, definitely the dominant aroma, for one of our two plants it is the only aroma that I am capable of to raise. The other phenotype is more complex, on the salty-cheesy smell a fresher and tangy/lemony smell is superimposed, very pleasant and different from its sister and at the same time linked to it by its common dominant cheesy aroma. For those who would still take a break from sweet/fruity strains and would like to try something more unique, consider this Persian Prince! :) 🌱 @khalifa.genetics 🍱 @gaiagreenorganics @greenhousefeeding_worldwide 💡 @official_marshydro 🌬️ @acinfinityinc 🍄 @bigfootmycorrhizae @promix_cannabis BY ZOUZOUCANNA ON YOUTUBE AND INSTAGRAM

Going nice ;))))

I should’ve scrog’ed with my strongest two plants. Trying to pull some very heady buds so went all out on Advsnced Nutrients. Going to A/b test with budget synthetics next grow

Nitrogen is low and I caught it late. Cant correct it much now due to it being in its second week of flower. They are fairly happy otherwise. We will see how this goes.

Hello everyone!👋 Thanks to everyone who stops by!😉 We continue to recruit.💪 -The plant began to actively secrete resin and grow new trichomes. -The resin has a rich and sweet smell, similar to berry candy. -Nirvana from AN has been added to the diet. -Added a little macro photo.😍 -No problems or deficiencies were found.

Week 3: Roots started getting bigger so I moved the plant to a bigger pot. Watered too frequently so algae began forming on the topsoil surface, note the black cover. Started LST early.

went yo town again and lollipopped some more

Top dress making these girls look real good......I also got some other strain such as runtz, turquoise jeep and sluricanne

Nothing more then low nutrient watering once a day untill i top her then we go straight to 1000ppm

TH 1Q2025 - Week 9 - Flower 6 
(ON Haze X Original Haze) X Northern Lights #2 “Todd’s Haze” Objective - 8 Female Plants, Topped ONCE @ Flip, 12” when topped - Modified Sea of Green Seeds Wet: 1139PM, 28.2.2025 Germinated: 2.3.2025 Flip: 21.3.2025 Harvest: 77 Days, DATE: 6.6.2025 _________________________________________ OBSERVATIONS A B C D E F G H (Convert to Plant ID) A - Moderate - Double Top B - Tall - Single Top C - Tall - Single Top D - REALLY TALL - Single Top E - Tall - Single Top F - Moderate - Double Top G - Moderate - Single Top H - Midget - Single Top __ Fri May 2, 2025 TH 1Q25 43:F:6:1 Harvest Dehu Amount: [ 4.5, gal] Runoff: [ 0.6, gal], [ 2.9, mS/cm] Res was empty. 2 Gal, there was a LITTLE Sol’n in the bottom of the res BUT Chiller Pump DRY. Chiller pump wouldn’t work for a couple of hours. After it cooled down and was re-submerged, it started cranking. These little Synchro/magnetic pumps are pretty resilient. The Little Giant as Feed Pump is awesome and pumps from the bottom 1/4”. The Synchro needs 2“ of water to submerge, with is 1/2 - 1 Gal, sitting around for ballast. Refresh Reservoir Amount: [ 2, gal] Primer A&B: [ 24.4, ml] EC: [ 1.9, mS/cm] 4 Gallon Refresh Amount: [ 4, gal] Primer A&B: [ 48.8, ml] Silica Skin: [ 24.4, ml] REVEG   Noted Revegging. Attribute it to HIGH EC (We ran up to 2.4 before bringing back down…) Dropped LightCycle to 11/13. - Looking to STAY COOLER ( 80°F) - Let’s reduce SUB-CANOPY Lighting to 50% (Dimmer @ 25%, lights for a 4x4) __ Sat May 3, 2025 TH 1Q25 44:F:6:2 Runoff Amount: [ , gal] EC: [ , mS/cm] We’re in reveg in earnest.      __ Sun May 4, 2025 TH 1Q25 45:F:6:3 Harvested Dehu: [ 3, gal] No Refresh No Pictures Bummed re: Reveg Today - Back to work tomorrow. __ Mon May 5, 2025 TH 1Q25 46:F:6:4 Only one thing to do - is to continue. Checked for Light Leaks. Re-adjusted Top Left Side Vent. Harvest Dehu: [ 1000, mll] Runoff Amount: [ 1, l] EC: [ 2.5, mS/cm] Refresh Reservoir - [x] EC: [ 1.8, mS/cm] - [x] SLF-100: [ 30, ml] - [x] Primer A&B: [ 40, ml] - [x] 3 Gallons (Dehu) Cleaned Manifold Filter: Silica Skin (White/Flake/Film) is clogging 2µ filter Need more stable Drip Rings - have to make my own, again. ;-} __ Tue May 6, 2025 TH 1Q25 47:F:6:5 Harvest Dehu - [ ] Amount: [ , ml] Runoff Amount: [ , ml] EC: [ , mS/cm] IF Runoff is 2 Liters: - Increase fertigation time to 3 minutes - Add Event 9 (9th HF Fertigation) - [ ] Consider reducing light Intensity, Main and Sub-Canopy __ Wed May 7, 2025 TH 1Q25 48:F:6:6 __ Thu May 8, 2025 TH 1Q25 49:F:6:7 - [x] Harvest Dehu: [ 3.5, gal] - [x] Dump & Clean Reservoir (Clean with H2O2). # No Silica ;-( - [x] Refresh Reservoir: - [x] 5 Gallons - [x] EC: 1.8 mS/cm - [x] Primer A & B: [ 67.7, ml] - [x] SLF-100: [ 25, ml] Our silica is creating a silica film in the irrigation manifold’s 2µ Filter. We’ll supplement separately, bi-weekly.

The Green Gelato has been a great success although i have been using this time as a bit of experiment the results are clear. While i have two plants that are ready for harvest both are looking extremely tasty, the third one in the smallest pot although it has huge top colas i would say its at least another week if not two away from being ready to harvest. I am now flushing these through ready for a great smoke. Thank you to everyone who has liked this diary fingers crossed next post will be results and review. 😌