She got really stout and bushy like a Christmas tree, you can tell by the stem structure that the colas are gonna be thick and dense, but boy did she have a Crazy couple of weeks. First it was little spots of powder mildew. Then She kept getting spider mites and i couldnt seem to keep them away. i have a lot of other plants and veggies growing my garden so i moved her. Little did i know that her being near my sunflowers meant that some type of sunflower worm would get to it and one burrowed inside the stem of the main cola so i had to trim that way down to keep it from rotting. The mold and the mites were friggin persistent so i moved her to a different location and shes doing so much better. im almost positive i stunted her by trimming the main cola. Im not mad though cause it looks like she has 4 different colas growing in its place so im ok with that. Most descriptions say she finishes flowering around 10-11 weeks and I'm there now with a lot of maturing left to do. Shes looking healthy so well see how she matures!

7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.

Day42 of flowering Girl #1 seems to have tighter buds and is still smaller, but looks like she will finish later (although she popped first by a few days) Girl#2 is much heavier and has sucked the green from her lowest fan leaves even though she is fed well. She also smells soooo good, over ripe cantaloupe/melons. I am really happy with these plants, which I did not top and let colas grow. I am thinking of removing the cola fan leaves to let light blast the other tops. Day 45, Removed almost all fan leaves to expose as much bud as possible to lighting. Scent is very strong and sweet. Very resinous leaf

… just moved into my new home by @original_homebox and lads i can tell: the climate controlled by the @growcontrol.de growbase makes me so happy. Its so much nicer here than in that shady chamber. I also had my first „real“ simulated sunrise today . Omg its so cozy living at my new place. And i also have a training appointment with @le_rouge._ soon. I‘m so exited. Can‘t wait to show you more growth. Unsere privaten Growprojekte die wir mit freundlicher Unterstützung von unseren Partnern @growcontrol.de @original_homebox @mars.hydro @biotanicpro & @purolyt realisieren starten! 🌿

Most of this week I was away so the tent was on autopilot. When i got back i was pleased to see all 4 strains where still around the same on development, with this one possibly being the farthest behind but not by much. The wedding cheesecake is the taller of the 2 fastbuds autos. She is starting to throw out some nice colours now. I'm quite confident this one is going to hit my 13 weeks scheduled for it, so not long left. Notes Day 64 nothing away Day 65 autofeed last weeks nutes Day 66 Got back, everything's fine Day 67 manually water Day 68 light strength from 75% to 87% PPFD was 599 Dli was 38.8 now its 692Ppfd 44.8Dli. Day 69 autofeed this weeks nutes Day 70 622Ppfd 40.3Dli Back in a week Take it easy.

04.04 F5 04.10 F12

👉 Comienzo la floración: .- Paso a maceta final (14 Lts) .- Aplico Delta9 (primera aplicación en riego). En el siguiente riego añadiré Bactobloom de Agrobacterias. .- Hago una defoliación suave .- Enciendo los Quantum Boards de apoyo para floración, con el espectro Rojo Lejano e Infrarojo, para acelerar el proceso. La intendidad total es de 475w, iré aumentando hasta los 600~700w progresivamente. ⚠️ Observando el tamaño que ha alcanzado plantas en estas 5 semanas, pienso que debería haber iniciado antes la floración. Me temo que van a crecer demasiado para mi armario 😳

10/10 Germination

04/01/21 inicio de semana 07/01/21. se paso a fotoperiodo 12/12 para tratar de adelantar la floracion con 71 cm de altura. 09/01/21 se le hiso una leve defoliacion 10/0121. cieree de semana con75 cm de altura se le amarraron lunos de los brazos satelitales bajos

Day 46 for the 54 plant grow. 42 different strains of photoperiods and 12 different autoflower strains in the: 8X8 GROW TENT WITH THE NEW          FC-E6500, FC4800 AND TSW2000 and green buzz all organic/vegan fertilizers🤘 The girls are loving their home and everything is doing good and looking pretty nice and getting bigger👍 Defoliation helped their branches fill in nicely 👌. I will be switching to flower 12/12 in a day or 2🤘🤘🤘🤘 BREEDERS AND SEEDS: DIVINE SEEDS: MAZAR, OPIUM, WHITE WIDOW, OG KUSH, PABLO ESCOBAR, DIVINE INDICA. AUTO WHITE WIDOW AUTO PABLO ESCOBAR AUTO WHITE RUSSIAN AUTO FRACTAL AUTO MONTREAL AUTO OPIUM AUTO KABUL AUTO MAZAR. WEEDSEED EXPRESS: GREEN CRACK, GHOST TRAIN HAZE, LITHIUM OG, CHEESE. DOCTORS CHOICE: DC KUSH, AUTO NIAGARA, AUTO ROCK MACHINE. EXOTIC SEEDS: HIPPIE BERRY, MALASANA GELATO, EXOTIC ANIMAL. GENE/MEME SEEDS: BLACK HELL. ORIGINAL SENSIBLE SEEDS: PURPLE PUNCH COOKIES, WEDDING CAKE, PURE KUSH, GORILLA COOKIES. SWEET SEEDS: BLACK JACK, GORILLA GIRL, SWEET ZKITTLES. EMERALD TRIANGLE SEEDS: GORILLA GLUE, MASTODON KUSH. SEEDSMAN SEEDS: BLACK SUGAR, PEYOTE FORUM, PEYOTE WIFI, BADAZZ COOKIES OG, PURPLE GHOST CANDY, STRAWBERRY BANANA GRAPE, L.A. PEYOTE KUSH, PEYOTE WIFI CBD, FUEL DOG, CRITICAL PURPLE KUSH. AMSTERDAM MARIJUANA SEEDS: GIRL SCOUT COOKIES EXTREME, GREEN CRACK. QUEBEC CANNABIS SEEDS: BRUCE BANNER, GREEN CRACK, QUEBEC CBD 20:1. I 💚 GROWING MARIJUANA: SKYWALKER OG, BANANA KUSH, BLUEBERRY CBD. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress2 Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA https://greenbuzzliquids.com/ #greenbuzzliquids @GreenBuzzLiquids https://greenbuzzliquids.com/en/shop/ PROMO CODE: rocknroll https://www.youtube.com/watch?v=8hEqyS1jPpI https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my shit🤜🤛 New FC-E6500 Led Grow Light-FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective compared with other same type lights.Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space.Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat, save 50% energy than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space.Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD FC-E6500 LED grow lamp enable cultivators to produce Density Buds, perfect for full-cycle hydroponic,soil,grow tent/room growing. Dimmable Commercial Grow Light: Cost-efficient,easy dimming & daisy chain max up to 20 lights, IP65 Waterproof, master light easily controlled for commercial & home horticulture. GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍    

Moved them inside last week and then chopped one down. Rot was taking over quickly. Buds hadn’t fully formed underneath but the main colas and tops were ok. Bit disappointing but the weather has just been terrible where I am this autumn 😂 what can you do.

Day 58, 11th of November 2020: I set the lamp 15 minutes shorter to switch off earlier so they receive 11:45 of darkness. I would like to imitate the nature when longer nights come with time till the 4th week (when they will receive 13 hours darkness a day 15 minutes minus 4 times = 1hour) so every week 15 min longer darkness for 4 weeks and then back to 12/12 to have bigger buds from the 4th week.... Wao. Well, all good hopefully they will stop growing soon but the strech is not that much thanks for the trainings such as topping and LST.... Pistils are started appearing so they she the sex I think one more week to go and they will settle down concentrating on bud development. What to say every 2nd day is fertilization with the mix and ratio above now we are waiting. Anything else? Well just look atbthe pictures and decide what you think. I am pretty sure they look cool LOL. This Gleato Zamnesia is very promising I really like the smell already she is nice but all of them I mean I am in love with all so. Kalinia Asia is nice and I am so excited for the Sweed Seeds ones the red girls OMG :)

Que pasa familia, empezamos la primera semana de floración de estas Gelato Olandese de Dutchfem. Parecía que no querían tirar al principio, pero es que no veáis de un momento a otro se quedaron sin espacio, vaya estirón esta última semana. Están bastante sanas , tienen muy buen color, se practicó una limpia de bajos y ramas que no eran necesarias porque no llegaran a la luz. Hasta ahora todo bien y ya superamos esta primera semana. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Las maximas de temperatura no superan los 26 grados y las mínimas no bajan 20, así que no me puedo quejar. Los niveles de humedad también son los correctos van entre 50%/65% de humedad relativa. Por supuesto el Ph lo estamos dejando alrededor de 6. Hasta aquí es todo, buenos humos 💨💨💨.

Da Gurls have been flipped... Yeah yeah. Added a little more soil mix (Ocean Forest, Perlite, Dynomyco Mycorrhizae Worm Castings and Girl Flower Power to top off pots Pulled some bottom leaves on All girls Fed a tea of Girl Flower Power, Worm Castings and Molasses. Going good so far (video) let me know what y'all think please... ***Repositioned Scrog Net***

These girls didn’t give me any issues at all. They just screw themselves. I planted one seed and when I did the mainline, I cloned the top, which is how I ended up with two plants. I can’t believe how big the buds got all this girl trimming it was a nightmare. There was so many leaves, some of the buds are so big that I did a small amount rot in one of them It’s so happened to be the biggest bud. I was running the humidity kinda high about 60% the whole time. About this plant doesn’t have much of a nose on it but she looks great and Got over these two.

Posting this as I’m on the last few days of the 3rd week from germination Great progress, a lot of roots for such a short period but not too much plant growth, will start watering daily instead of watering every 2-3 days Topped the girls today (Day 18 from germ) and starting to do mainline on all the Bubba kush.

Amazing clasic amnesia smell, very strong, very sweet and citrus at the same time, cannot wait to to see this buds fully developed what a pleasure to work with this strain. Stay tuned for more of this wonderful strain!! 💚❤️💛👨‍🌾

Week two went good there was a bit of underwatering on my part, these ladies drink! The breeder did warn me about that though. Beside the underwatering things look good. Next week they'll be transplanted to final 11L fabric pots. Happy Growing!