DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

This was the girls last week! I decided to call them finished on day 63 the tricomes are almost all cloudy, with a small amount of amber. I’ve learned that they continue to degrade as you dry and cure your flower, so I’m trying something new for me, and pull them a little earlier than I usually would. In addition, after watching a podcast (Dude Grows Show) if you don’t know, check it out… I decided to run the lights for 18 hours instead of 12/12 for the last 5 days before harvest. The idea behind this, is to stress the plant enough to increase its natural sunblock/protections, which would be terpenes and tricomes just before you harvest, while also possibly quickening the finishing time for your plant. The group was discussing the benefits of this (listed above) while some already had implemented these practices when finishing plants. The recommended time to run extra light time would be around the last 5-9 days of the plant, without having any nanners or weirdness happening with your plants. Anyways, they finished amazing, sticky, stinky and heavy ❤️ the Terps are crazy on these strains….Harvest details to come. Thanks for stopping by 💚🇨🇦👊

Harvest Report by Zuppler - End of Week 9 Yo, what’s good fam? Zuppler comin' through with that harvest report, Week 9 wrapped up and it’s time to bring these queens down. The buds are lookin’ fat, frosty, and sticky – they ripened up just right, with that perfect mix of milky and amber trichomes. Real proud of how this run turned out. I learned a lot in this grow, no doubt. Dialin' in them nutes, catchin' the burn early, and lettin' them heavy buds stack properly. It’s all about leveling up, ya feel me? Next grow, I’m excited to be poppin' some Cherry Pie and Fruit Cake beans – gonna take everything I learned this round and make the next one even better. Zuppler out. Stay tuned, fam – the next one’s gonna be fire! (Gemäß § 6c Abs. 2 des deutschen Cannabis-Gesetzes beachten wir die zulässige Höchstmenge von 100 Gramm getrocknetem Cannabis für unseren Zwei-Personen-Haushalt. Alle darüber hinausgehenden Mengen werden gemäß den gesetzlichen Vorgaben unverzüglich vernichtet, um sicherzustellen, dass wir uns stets im rechtlichen Rahmen bewegen.)

Week 4 – Flowering (Day 22–28) 🌸🌱 At the end of Week 3 (Day 21) we carried out a deeper round of defoliation and some lollipopping. By now the stretch is coming to an end, with the plants settling close to their final height. We’ve also stopped foliar feeding, since every single plant is now covered in developing buds. To keep everything protected, we refreshed the beneficial insects, better be safe than sorry, how we say in German, sicher ist sicher. Already in this early stage of flowering, we can clearly spot differences in structure, bud formation and even the first aromas. Some phenos are showing exceptional promise — those will be the ones we’ll highlight more in the coming updates. 🔎 Pheno notes so far: SD1-1 – balanced structure, even bud distribution. SD1-33 – tall central cola with healthy branching. SD2-13 – compact structure, promising stacking. Sativa Dream expresses an old-school sweet Afghan aroma with a citric twist, setting it apart from the rest of the room.

until now everything is going well waiting until everything is dry💪🏽

Down to two plants gave away one to a grower friend of mine...Hopefully I have a male and female here. I need more Skunk #1 seeds for a massive grow.

Time flies when youre having fun! 😁 Getting stacked and approaching the final stages... it´s gonna be tricky since they some look closer than others! Have to keep an eye and start with the daily inspections 😉 This grow I was focusing more on quality and it seems it´s an improvement from the last one! 😍 ❤️💛💚

I don't have single complaint. I love this strain and will absolutely be growing more in the future! Great bud structure, never a yellow leaf, just overall badass plant. Very happy I took a clone lol.

The overall cycle had to deal with alot of heat issues and lighting so what they did product is certainly top quality flowers just short on there stretch period so will run again to make a certain opinion but as of now no hermis and all seeds flowered apart from one tiny plant 10 girls all to harvest shows stable genicitic traits from these girls also , height , bud structure colour shape smell all seem to be closer to a match of each other

the last week has been really sunny again and the temperatures are also constant. she has started to show small blooms. so far she is doing well

I really push this plant with the fish mix and i didnt feed her enough sugars when she needed the most but she got a lot bigger and the side branches are as big as the main cola.

going fine try trim away most fan leaves. Last day week 8. 2 more days with Nutrients then i am going last time with just Nordic spring water 💯🙏💪💪

🐾🐻🐾 Bros Beast - Breed Bros 🐾🐻🐾 DAY 98 / FLOWER 60 / WEEK 13 Gens: Hulkmania x Muffin Berry You can buy this great genetics on Web side: https://breedbros.com Only water to the end. I will keep it for a few days more. Thanks for the likes and comments, see you in harvest next week!

Here we are at the beginning of week 3 and the babies are thriving :). This Cherry Cola is growing well and things are as i would expect at the end of week 2/start wk3. I’m going to be starting LST at some point this week .

Se acerca el fin para esta hermosa LCC, los tricomas están casi en el punto justo y la cenecencia se logró con éxito, ahora solo esperar un poco más y estaremos cosechando con casi 76 días desde que salió a la superficie 🤓

Twiggy and Zoey will be hurting this week. Trying a bit of drought stress to see how it will affect the terps. They look great going into it, so we'll see how it goes. Pots have dried out and are super light as of 5/21AM

Didn't turn out how I thought it was going to but I learned alot from all the mistakes that were made. For the first time using a trellis i see that I need to clear out the bottoms way better because the are a ton of pop corn buds. I should also have some way to top off the plant incase the plants drink a lil faster then expected because there were a few times the water levels got extremely low. Next time im gone have to make sure i have away to reach all sides of the plant once I cut her down I seen the back needed way more attention but couldn't really get back there because the tent was against a wall. None the less lessons learned time to regroup an get ready for the next grow.

I ❤️🍁😁

Other than my humidity and my temperature Dropping more than I would like but everything else been doing OK

Welcome to week 10 of my white truffle grow! She did great in the past week. Bulked up those nice frosty buds. I'm so curious how she is looking at the end. The leafs are still looking great, a vibrant green color and I'm guess she's happy. I have some problems with high humidity directly afer watering but until now she's handling the environment just great.