Likes
10
Share
È partita alla grande la Diesel auto della RQS....fino ad oggi avevo fatto crescere solo in vaso sotto la sp3000 Marshydrø ora sono curioso di vedere cosa puo fare con l idroponica che è assolutamente il modo di coltivazione dive ho miglior risultati e anche quello che in assoluto preferisco...
Likes
19
Share
@sellem
Follow
This week marked the start of flowering - they were showing sex and soon you could make out the little preflower budsites on both of them! This week also marked the start of their explosive grow-stretch phase. Looking back, i should have trained way more aggressive. but not TOO aggressive! on Day 21, i adjusted a prexisting stake too hard and plant Bs main trunk snapped in the middle. (I only fully noticed this in the next week, i just heard a snap but didnt visually see anything, the crack really formed over the next couple of days) A shock for me as an inexperienced grower - but again, as with everything so far, the BPP just. did. not. care. at all. i supported her with some stakes from below and rubbercoated garden wire, but honestly, the plant took good care of itself. Note to self - train early, train evenly, and test flexibility BEFORE adjusting :P Ramped up PPFD to about 600 and Watering to 1,5L on Day 21 and 2L on Day 25. They were getting thirsty! Day 21 was the last time i added root juice with 1 ml/L, and Day 25 i began adding Flowering Nutes and Stims with BioBloom and Topmax, 1ml/L each per plant. PH with both waterings was 6,5. Didnt measure Drain PH cause i was lazy. Also defoliated leaves that were blocking out future budsites. So far, they didnt care about topping, staking them down, defoliating, and Plant B also didnt care 1 bit about being literally ripped in half. i am impressed.
Likes
24
Share
@Puraweeda
Follow
The Gorillaz zkittlez (on the left) start to be really sticky. And smell like zkittlez... One of them has some really Orange pistils. The blue sherbet x purple punch (on the right) is a little bit slower. Less trichromes, less smell. Bud the bUds start to be nice as well. As the brand suggests at the 4 week of flowering I add 5grs/L of guano for flowering stage on the top of the soil. No pk booster this time for watering. Maybe I will put the minimum amount of power feeding booster the next watering.
Processing
Likes
21
Share
@RIZZY
Follow
Everything was fine, until I split the main stem persay, trying to lst. Advice would be appreciated"
Likes
33
Share
Next week harvest!!!
Likes
7
Share
All good I think Tell me if you see some wrong please!!!♥️And more ♥️Stay save and healthy!!!
Likes
32
Share
@Hawkbo
Follow
Just started them all on the Green Buzz Liquid Organics and will run it the rest of the way. I'm not going to add much to the line just some calmag, enzymes maybe terpinator I have to experiment with it a little bit. The first feed went extremely well the plants instantly reacted within an hour after the feed especially the next day. The additives in this line barely raised PPM at all which I liked. It also doesnt stink like other liquid organics I've used. These 2 seem a little slower coming along than the others. I had to do a little defoliation to open up some space but other than that not much to update. Have had some high humidity the past couple days.
Likes
10
Share
She is now streatch and is getting in flowring stage. Lets see what buds will come out from this strain. First time growing Seeds Mafia strain
Likes
13
Share
The Ztrawberriez Auto is very resistant has a great sweet strawberry smell throughout the garden. As you can easily see from my grow question, I was initially afraid for the plants due to the high temperature in the greenhouse (as soon as the sun shone ~40 degrees). It turned out that the plant seemed to like it and rewarded me with beautiful buds with purple tips. Growdiaries won't let me delete the question otherwise this would have happened long ago... She finished very quickly and took just 70 days from seed to harvest. All this confirms that fastbuds is the right address for autoflowers. I'm already looking forward to the next run. Make sure to follow out instgram channel Krautbauern420
Likes
7
Share
Flushing her system before harvesting! 6.5 ph water
Likes
9
Share
@Unnamed
Follow
This is the start of my second grow and also second Northern Light Auto from RQS, the goal is to hit #1 in g/plant for that Strain. I didn't take as many notes as in the last grow but there are timelapses, some photos and metrics from probes. Started with 3 Seeds and then picked the 2 strongest. The System is a NFT System but due to the size of the tube and root growths the solution with submerge the roots ~70% later on. To combat that I use 3 small 1.5w air pumps, these are super silent, if one dies I got 2 more running and to be honest air pumps used in DWC systems are often oversized and rely on Broscience. In my Salad/Herb NFT Systems I don't use any air pumps and the plants are just fine and grow great. This time I added sprinklers to humidify the air inside the tube, slightly moisturize the Rockwool and speed up root growths. Spoiler: Was a great success :) The ratios for the fertilizers are not accurate in the following weeks, I have a 120l Reservoir that is filled 90-110l I top it up once or twice a week to sustain PH and EC, if you want to copy it just go by the EC and use the B (Calcinit) and A (Kristalon Blue/Orange) 50/50. I mix the solution myself with dry salts that I bought in bulk 25kg bags. 4l Water(distilled/RO preferably, tap water is OK) + 1kg salts mixes just fine, keep the solution dark and cool and it will stay stable for months. Dry salts don't expire if kept cool and dry so only mix what you need and keep the rest stored as dry salts. 40ml A + 40ml B is about 2EC and 6PH with my tap water, very similar to Canna, Plagron etc. isn't it? just with the twist that I pay ~20% of the known brands. P2O5, K2O, MgO etc. are always the same as long as they are produced by a good manufacturer, Yara is a world leader in fertilizer production just not to be found in you general hydroponics or hardware store. Any other known manufacturer is fine as well, pick the cheapest. Check Hoocho on Youtube to see a guide on how to mix your own solutions, it ain't that difficult trust me. From week 5 onwards I also use Oxygen granulate (KMPS, CAS-70693-62-8, 2KHSO₅ * KHSO₄ * K₂SO₄) if you want to use this check pool supply stores and buy the cheapest. Keep this one dry, cool and dark. I used a old pill bottle to keep some ready to go because it came in a 1kg container and I only need 2-4g per serving + the bottle has a silica pack in the cap. From week 6 onwards I used Haifa Grow Clean for Details check week 6, I use this one as dry salts and add it directly to the tank, it does not interact in a bad way with the solution. For meassurements I use a generic 8in1 Meter "PH-W218" branded by many companies, as usual, check stores and buy the cheapest. (Check week 1 for an image of it) I got mine from Aliexpress for ~70€ it uses the Tuya app so you can always check your metrics and export them aswell. The PH and EC probe are accurate and are giving me stable results for almost 1 year now, I re calibrate the PH probe once in a while and it is tops 0.15 off after a month, always double check your results with PH drops/paper. Bluelab is... A LOT more expensive for less value. For the timelapses I use 2 Tappo C210 2k Cameras, these have the ability to make the stream available trough RTSP so that you can access it trough a link in a browser and that way I snap a Screenshot with a raspberry pi :) after that I just render it with blender to a timelapse. Sadly they seem to have trouble with the bright lights and I get image trouble over the course of the day, if you have a recommendation hit me up :) The script I use to take the Images: #!/bin/bash ########################################################################################################################################## ##### A script to save images from a rtsp capeable IP cam, Tapo C210 (2k image quality) for example in my case. ##### Images are saved in a directory named "2024_01_01" for example, it uses the "date" command within the system it is running on. ##### You can then render the images to a timelapse, I use blender for that. ########################################################################################################################################## RTSP_URL_LEFT="rtsp://:@:/stream1" #sets the variable for cam LEFT access RTSP_URL_RIGHT="rtsp://:@:/stream1" #sets the variable for cam RIGHT access while true; do TIMESTAMP=$(date +"%Y_%m_%d_%H_%M_%S") #sets the timestamp variable DIRECTORYLEFT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for LEFT DIRECTORYRIGHT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for RIGHT mkdir -p "${DIRECTORYLEFT}" #makes a directory for each day if it doesn't exist for LEFT mkdir -p "${DIRECTORYRIGHT}" #makes a directory for each day if it doesn't exist for RIGHT ffmpeg -y -i "${RTSP_URL_LEFT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYLEFT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for LEFT ffmpeg -y -i "${RTSP_URL_RIGHT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYRIGHT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for RIGHT ################################################################################################################################ ##### Waits for 180 seconds, change that depending on how precise you want the timelapse to be, less waiting = more images ################################################################################################################################ sleep 180 done Hope you like my diary, leave a comment and a like if you like it :)
Likes
4
Share
These ladies are doing mighty fine! The smell is unreal! Almost like walking into a candy shop! The color, cannot be better. I do have 3 purple phenos and 2 green. But even the green phenos have alot of purple. Gonna be a some beautiful stuff to say the least. Noticing some minor foxtailing on one, has ro be genetic. The environment is on point. Intoduced Big bud supplement to them this week, and they seem to love it so far..
Likes
8
Share
Likes
3
Share
Week 5 since light switch to 12/12 The terps are AMAZING and very very strong. Entire place smells when I open the tent. And lingers for way too long. So hard to pin down the exact smell as it changes through the weeks. Sweet creamy skunky gas with a slight new shoe smell. Like that strong brand new fresh rubber or plastic smell you get when you open a brand new pair of sneakers. Everything the same as last few weeks. Same feeding and nutes. I switched to nutes that have zero nitrogen around week 3 but wish I waited another week as my leaves are getting yellow pretty fast already. Assuming it is the nitrogen that's causing it. Buds look super frosty though!!
Likes
11
Share
I was really wishing for the pheno on the seedsman website but I guess I would have to just hunt through many more blueberry seeds to find that one. Overall I enjoyed the grow.
Likes
9
Share
@Jbuttch
Follow
Ya viendo el resultado del último LST, desde aquí ya veo cómo van las cosas!