The Grow Awards 2026 🏆
Likes
Comments
Share
Not bad these girls are loving the Sun.
Likes
19
Share
Que pasa familia, perdonar por la tardanza pero aquí estamos de nuevo y es que traemos la 6 semana de floración de nuestras gorillas. No veas que aroma que empiezan a desprender , es increíble. Son plantas con forma indica y follaje sativa, floración rápida unas semanas más y ya están listas para cortar. Ph controlado, 7 semana prepárate lavado raíces y solo agua, que lo agradecerán.
Likes
18
Share
11/19: they are now on just water and flawless finish. In 8 days I will chop them down. I am going to just fresh freeze them and then make bubble hash out of them a couple of days after. I am still angry about the lack of purple, but happy with the grow as a whole, despite the dramatic differences in phenos.
Likes
63
Share
@AsNoriu
Follow
Day 85. Just before lights photo's for better true colour understanding, Bio Grow and AlgaMic is out, after finishing this cycle CalMag and Silica out too. Hope its not too early, but girls are really healthy, time to pump up the flowers not leaves :) Day 86. Girls just flying, very happy with Gorillas and Control Garden looks really funky, they stand under no direct light on them... and still flowers looks amazing. Got my new mobile, had to try out :) Next week very busy at work, no updates I think. Day 89. So again i made mistake, while watering them last time accidently left heater on, they overdried , plus temps where at +33c ... Bunny Gorilla looks bad, Gorilla Max got biggest pistil damage, half went brown. Thinking i took nitrogen too early out, but we shall see. On other hand all Control Garden took it well even Cookies with theirs waxy leaves stood thurst nice as such stress can be ... Planing to do defoliation next week, but if Gorillas started to eat themselves already will leave them as it is. Future will show .. Happy Growing !!!
Likes
15
Share
Week 2 has gone just as well as I'd like it too! I had an accident during the week where I had dropped a sticky bug trap on one of my girls, this led to me accidentally ripping off a fan leaf and a half, but she seems to have come out of it just fine! (Thankfully). I have been feeding 1/3 strength nutes the past few feeds, stepping it up from 1/4. I will be watering until I see runoff from now on to prevent nutrients from building up in the coco. Update(day 15, 4/12/20) Today I purchased a new oscillating fan, co2 bags and a new hygrometer that hooks up to my phone and shows me stats. The girls have been putting in a lot of work over the past 24 hours. I also had a Purple Punch photo seed sprout today which I may be turning into a mother plant. I will be starting a diary for this girl too. Update (Day 16 5/12/20) Second purple punch photo popped today, going to keep 1 inside and give the other to my mom to take care of. The girls got their first 1/4 dose of calmag today fed at 6ph due to all the nutrients settling there.( I do have ph +/- but I'm going to try run this whole grow at 5.8-6.2. Update (Day 17 6/12/20) Plants seem happy today. Fan leaves producing a the pre-existing nodes are starting to shoot out quite rapidly. Unfortunately, my streets power went out today for ~90 minutes, I opened the tent, windows and doors to get any light in I could, thankfully the power came back on shortly after. I fed the girls today with very little run-off(I'm trying to perfect the amount of water they need). Update (Day 18 7/12/20) The girls have jumped up over night! I wont be feeding today as I'd like the coco to dry out quite a bit more. Update (Day 19 8/12/20 Gave the girls a small feed today with very little run-off Everything seems to be going well so far, I'm very thankful! Update (day 20 9/12/20) Everything is going pretty well today. I will not be feeding as the increased humidity has kept the coco more moist than usual. Will be feeding full strength nutes tomorrow! Thanks for stopping by, HMU with any questions or tips you have.
Likes
22
Share
@Fatnastyz
Follow
Day 44 10-8 Tea and slight defol. Shes got a tall branch! Look at it go! 😱😁🤘 10-9 Water, leaf removal. 10-11 Water yucca cal/mag. Tea soon. 10-12 Day 48 Well her head was way above the rest, so she got bent down. Personalsmokes talked me into. He said, go for it! So I did! 😂 Hopefully i didn't F her up. No clue how she got away from me, but this is something new for me. 😁🤘 Light is amazing on everything now! .
Likes
2
Share
1st grow I’ll let you know how it dry and cure
Processing
Likes
7
Share
SUNDAY 4/28: I plucked off some dead leaves and did some leaf-tucking. The two remaining colas on the good one in the big tent (the one I had to chop off 5 big potential colas) is really starting to bud up now. She'll make a pair of 10" colas. The bigger one in the small tent still has the big curl going on with her leaves..doubt they straighten up. The new growth looks more normal, but still I'm sure the problem was that the soil was just too compacted for her roots to flourish. I'll continue prodding and poking with a skewer to loosen the soil and get oxygen to the roots. The smaller, daintier one that I had to remove a couple branches from is stretching her remaining branches now and starting to put on the pistils. Daytime temps are still hovering around 87-90f, but I've got them sitting in 70-72f temps for 6 hours of darkness now.😁 I did a little video today and I'll take a few "glamour shots" tomorrow. MONDAY: I think I phuktup the PH again because they are getting fed everything they need and still showing signs of various deficiencies. I douched everybody with 1/3 gallon including some boomerang, calimag, bembe, bud candy, and terpinator. No time for glamour shots... TUESDAY: I was busy again today, so no glamour shots.. WEDNESDAY: I did a little training today and finally got around to taking some good photos.😎 A couple of plants in the tent, adjacent to one another, suddenly got crispy leaves..(contagion?) THURSDAY: The 'contagion' seems to be spreading through the garden... I'm thinking maybe I completely PHuktup the ph when I added silica last time and didn't correct it?? Not sure...but it's sad..they're all gonna be less than photogenic for the finish... FRIDAY: I plucked some dead leaves and misted everybody with perfectly PH adjusted spring water and increased airflow in the tent. Also decreased the dehumidifier to 45% RH. I moved a lesser plant into the small tent and a better Candesia into the big tent.
Likes
11
Share
@CalGonJim
Follow
12/5 did some LST yesterday the first time I tried it she’s responding well I’m going to continue nutrients at half strength and that’s all for now 12/6 there are more bud sights on this than I’ve ever seen on any auto flower. I’m already seeing a lot of crystals in the leaves she’s responding well to the LST and I gave her a 1 mL per liter feeding of nutrients with 2 L of water I’m trying to be very careful. I have been using SF1000D lights I bought them a few years ago,they’re not bad they do get hot, especially when I’ve tried to put two of them in one tent it is very difficult to keep cool. Viparspectra I’ll keep it running at 80% and that should be good enough for one autoflower, I got the XS1500. I want to see if there’s any difference in the newer LEDs compared to my older Spider Farmer lights . I found a discount code in one of the discussions here in the site somewhere, and it actually worked it came to about 145 total. It’ll be here tomorrow. 12/7 💎💎💎 I love this seed company. This plant that I topped between three and four and did LST two days ago on is showing me bud sites that are fuller and more full of crystals that I’ve ever seen. this is my 10th Autoflower, my first one from this company and it’s completely different, way better, it’s just phenomenal. I like a clean and symmetrical and even grow. Doing this will make it much easier to process. I’ve never seen a plant grow like this. This is my first time trying LST and I’m glad I did it. It completely changes the plants you can definitely see there will be much more. 12/7 she looks great. because I spread the branches out the way I did, and only have one light on the leaf surface temperatures and the bud surface temperatures are all between 72 and 74° which is perfect. 12/8 Resin production is incredible. it looks like millions of tiny angels jizzed all over my plant it’s the most beautiful thing I’ve ever seen 12/8 I got the new Viparspectra light today. It has about 100 more LEDs in the SF 1000 D I’ll take some magnified pictures of the LEDs. The new one is much heavier I like the dimmer that way I don’t have to put in secondary lights for seedlings. It’s not a bad light I like being able to dim the light I ran it at 100% and the temperature was a little hot for me and I’m keeping it kind of close to the plant so I’ll probably lower it down to 75% and that should be good I think. Also I noticed that this one Viparspectra light looks to me brighter than 2 sf100d lights. 12/9 I turned the Viper spectra light down to a little bit less than 75% to bring it down to 100 W. When I did that the temperature stays around 95° on the board and about 98° on the driver, so it is far cooler and more efficient at the same wattage than the older spider farmer lights which were at 110 to 118°( about the same as the XS1500 at full power). So a single 150w xs1500 is about the same as 2 SF1000D lights as far as heat I'm sure the PPF or whatthehelleverthatis is higher ,very nice, If the SF1000D's would have had dimmers they would have been perfect. 12/10 awesome 🤩 12/11 I am seeing lots of resin production more than I’ve ever seen. I think this is so far been my best most successful grow this plant is great. I’m glad I found the seed company. The other ones I used before were pretty bad, I don't LOVE them at all. Also my Yamaha A4A 1600 receiver is total junk, I mean total... I'll never have the money to spend on something like that again, I was totally ripped off. Unrelated but so many formerly trustworthy companies are just TOTAL garbage
Likes
9
Share
@Justrite
Follow
The flush begins , Using final flush with water at 21.oC And some defoliating to get light down . Managing to keep temps stable at 23-25 oC with both lights Also added in a mars hydro light Last week and seems to be working well and shown good response from the plants under it
Likes
13
Share
Likes
43
Share
@Hashy
Follow
******************************************** Week 3 Veg. ******************************************** Light cycle=18/6 Light Power=90w 37% Extractor controller settings High temp= Day 25c, Night 20c Low temp= c Temp step=0c High Rh= Day 63%, Night 68% Low Rh= % Rh step=0% Speed max=8 Speed min=1 Smart controller settings (during lights on). Lights on=4.00am Humidifier on=-55% Humidifier off=+59% Top fan on=+24.0c Top fan off=-23.5c Smart controller settings (during lights off). Lights off=10.00pm VPD aim=0.5-1.1 DLI aim=16-20 EC aim=0.2-1.4 PH aim=6.0-6.8 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= Autofeed 5 drippers. Feed=Veg Nutes. Neutralise=0.1ml/L Grow=2.0ml/L Roots=0.2ml/L Silicon=1.0ml/L Calmag=1.0ml/L Volume=8L Easy Ph down= 0.125ml/L Ec=1.4 PH=6.5/6.7 Runs=12 Run times=4min (260ml each) Gap times=16min Total runtime=48mins (3.12L each) Total flowrate= 130ml/min (65ml/min each) Auto start time=5.00am Auto stop time=8.44am 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** 📅2/6/24 Sunday (day 15) 📋 Hot today. Humidifier is in grow room now and not the tent. 📅3/6/24 Monday (day 16) 📋 H=11cm D=52cm Dli=18.6 Ppfd=287 📅4/6/24 Tuesday (day 17) 📋 Installed drip system. 📅5/6/24 Wednesday (day 18) 📋 I don't think this one got as much water. Topped ✂️ between 5th and 6th nodes at 8.30pm 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=nutes Volume=8L Ec=1.4 PH=6.5 Volume left=3.75L Volume used=4.25L Volume each=2.1L Runoff. Total runoff=0.7L Ec=6.3 PH=5.6 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 📅6/6/24 Thursday (day 19) 📋 📅7/6/24 Friday (day 20) 📋 📅8/6/24 Saturday (day 21) 📋 H=15cm D=48cm Dli=21.3 Ppfd=328 ******************************************** Weekly roundup. 📋 This is Fire, she's been topped between 5th and 6th nodes, recovering well from the topping and looking very healthy. The rate she has grown has really impressed me. Take it easy. Back soon. ********************************************
Likes
12
Share
Hey again my fellow growmies, Tomorrow being the 13th will be my last water change before i harvest on Sunday 17th. Then she would have been flushed for 14days and should be clean and nutrient free! The discoloration to her leaves show me that she is ready!!! Her smell is absolutely amazing I can't explain it. Apart from she smells like a candy store! Absolutely beautiful! Once harvested she will go into glass jars to be cured and then I can place a review and pics etc. Cannot wait!! Excited 😁 😄 💗 💖 😁 😄 Till the next time peace and love to you all 👍✌️🤜🤛🌱
Likes
8
Share
@Kirsten
Follow
18.5.25: I watered with 3ltrs of dechlorinated water PH'd to 6.4. I added Per 6.5 litres; ♡ 1Tsp Sea K(elp) ♡ 1/2 Tsp Bud Explosion PK booster ♡ 7ml Trace PH: 6.4 PPM: 780 I added the PK booster this feeding, just to provide some phosphorus without risking an excess. Next time, I won't use it. 23.5.25: FastBuds Mystery seed #1 is looking super frosty! The buds are still smaller than I'd like to see at this stage. I'm sure it's going to be fire 🔥 smoke. There just won't be much of it, unfortunately. She is getting close to being finished, so I have begun checking trichomes. At least another week to 10 days is my estimation. She was thirsty, and the pot was dry. I decided to add in a PK booster again. I watered with 3.5 ltrs of dechlorinated water PH'd to 6.4. I added Per 6.5 litres; ♡ 1/2 Tsp Sea K(elp) ♡ 1/2 Tsp Bud Explosion PK booster ♡ 7ml Trace PH: 6.4 PPM: 785 SOLUTION TEMP: 30°C SOIL PH: 7 SOIL TEMP: 21°C AMBIENT TEMPERATURE: 23-26°C RELATIVE HUMIDITY: 55% 24.5.25: I watered with Ecothrive Biosys 3ltrs each. The plants are still drinking at least 2 litres per day. They are increasingly thirsty, and it's important that I don't let them dry out. The soil is mostly coco and perlite, so it can dry out quicker. There are plenty of worm castings, too, so that definitely helps. The buds are developing and progressing very nicely, keeping up with the flowering nutrients and alternating between Ecothrive Biosys, Trace, and Greenleaf Nutrients. 25.5.25: I watered with 2.5 ltrs of dechlorinated water PH'd to 6.3 I added Per 6.5 litres; ♡ 1Tsp Sea K(elp) ♡ 1/2 Tsp Bud Explosion ♡ 7ml Trace PH: 6.3 PPM: 840 SOLUTION TEMP: 30°C SOIL PH: 7 SOIL TEMP: 21°C AMBIENT TEMPERATURE: 23-26°C RELATIVE HUMIDITY: 58%. ☆ Xpert Nutrients PH down, up to 1ml. ☆ Ecothrive Neutralise 1 drop per litre from the 1ml pipette, which is attached. This is my dechlorinator. Thanks for stopping by 🍃✌️💚🤞🌱😊
Likes
21
Share
@Stash074
Follow
This week went well. Overall the ladies are healthy. They ended up stretching a lil more. I do know this will be the final week of stretch before focusing on producing buds. Which will be my goal over the next week,more defoliation. Also I've been using liquid kool bloom with feedings..we shall see if it makes a difference.. will keep yall updated in my next upload ..Happy growing 😎🍃
Likes
27
Share
Day 49 Plants had a little transplant shock from last week as they didn’t really grew much taller. I’m not 100% satisfied with how the veg stage went so far, but I learned a lot and will do better next time. I attached some gardening wire to some of the branches to create a more even canopy. Haven’t watered since last Saturday (transplant) as the soil is still wet and starts to dry out slowly now. Most likely I’ll flip them into flower in 2 weeks around Day 63. I appreciate every advice 🙏🏾
Likes
5
Share
@Nargileus
Follow
Die Ernte wird in Dryferm Bags getrocknet, habe ich schon bei einer anderen Pflanzen aus probiert. Hat super geklappt, auch wenn man erst Mal denkt das das doch garnicht gehen kann in einer Tüte.