The Grow Awards 2026 🏆
Likes
18
Share
July 5 - The girls are still doing awesome. temps are between 21-26. Humidity is 40-50. Still feeding every 24-36 hours with 3L per plant. July 6 - They are doing good. Showing lots of flower sites now. Unfortunately I did not get any pictures today. July 7 - Tons of progress since last week. I don't see any signs of any problems, and still no pests! The smell is getting A lot stronger as it starts to flower more July 8 - Still doing there thing, no problems, temps and humidity is fine. Have been feeding every 24 hours now as they seem to be really thirsty July 9 - Super happy with how they are doing. No issues yet. Smell is heavier, and tons of bud sites showing up. Only issue is they are growing pretty uneven. July 10 - Time to get a even canopy! First time doing some HST. I also did some defoliation. One of the stems split open a bit but it seems to be doing just fine. I did he HST and defoliation in the morning, i then took pictures of 12 hours later and everything seems just fine! July 11 - Everything seems to be a lot more even and the broken stem doesn't seem to affect the growth.
Likes
57
Share
Staggered start to the 3 autos but that's only for breeding purposes. I plan on using sts spray to reverse the first one so I gave it a two week + 2 day head start. Full tutorial of the germination process is viewable on the video posted here and my youtube channel, link is on my profile if you care to watch it there, I found the loading screen for the video rather tedious on here.. Happy growing!
Likes
23
Share
March 12, Day 71 my Sea Of Green is now a Sea Of Buds 😄 Tomorrow I will collect the three plants closest to the poster that seem to be mature. Next week I will collect the last two gorillas (excluding the two plants with a photoperiod predominance) because they seem to need a little more time. March 13, Day 72: I wanted to make a video or a video to show you the defoliated plants ready to be cut, but when I removed them from the SOG they no longer had the support of the nearby plants and the branches could not support the weight of buds. I'm not complaining, in fact I didn't think I would get such a big harvest. For the same reason I only cut and put to dry two plants, I don't have enough space in my dryer that is only 50x50x120 Centimeters. However, I made a video with Harvest and a video with the new layout of the plants in my SOG. Now in my sea of buds there are three gorillas left, two cheese in advanced bloom and two photoperiodic gorillas and the margin there is a Cheese that has just started to bloom. I realized that I can make only one harvest page for each variety, I thought it was possible to create one for each plant, so I will edit the diary for the final harvest, when I will also collect the last three gorillas in my secret garden. Thanks to everyone for the views and likes 😉
Likes
12
Share
@Kirsten
Follow
16.2.25: I decided to check out the lower canopies of all plants to see if I need to get rid of any foliage. I did get rid of a few small branches and leaves. However, whilst I was doing this, I saw more garden pegs from my LST remaining. There were about 6 or more in Pink Mist alone. Additionally, on Watermelon, there were some left in, too. I'm so annoyed to see that because the plants are really stretching, and I could've potentially disrupted this by leaving the pegs in for all this time without realising it. 🤞 that I haven't compromised things too much. We'll see. I watered today with 2ltrs of dechlorinated water PH'd to 6.3 containing the following nutrients; ♡ .8g Green Leaf Nutrients PK booster ♡ .5g Ecothrive Biosys I ordered quite a few things for the garden. I got Greenleaf Nutrients Sea K(elp) and Mega Crop Parts A+B. To go with their PK Booster I got last month. I'm excited to try it all together. Next run, maybe just using these. We'll see how it goes. 18.2.25: The plants are going crazy for water! Everything is getting used right up so fast! Today, I decided to add some more Black Strap Molasses to add some carbs and other micronutrients. I'll add the jar with the label in the photos section above. I watered a very small amount to each plant. What I put in: ♡ Black strap molasses 150g ♡ 2g Sea K(elp) Greenleaf nutrients. I dissolved everything in 4ltrs of dechlorinated water PH'd to 6.4. 19.2.25: I received the majority of the garden purchases that I made. I'm still waiting for the Ecothrive Life Cycle. I wanted to top dress, but it's been delayed unfortunately. I am using my Greenleaf nutrients products which I bought on Amazon. I got the Mega Crop 2 part system Part A and Part B. I have the Sea K(elp), and the bud explosion PK booster. I really wanted to get some of their sweet candy asking read many positive reviews. Unfortunately, for me, this is unavailable to buy currently. So that's a little disappointing. I needed to do a good watering so when my nutes were delivered today, I got excited 🤗 I watered 2ltrs of dechlorinated water per plant, PH'd to 6.4, containing the following nutrients: ♡ 1g Mega Crop Part A ♡ 1g Mega Crop Part B ♡ .5g Sea K(elp). The plants drank this up within a few hours. I'm going to try and hold off on watering in hopes that my Ecothrive Life Cycle will arrive so I can top dress and water it in then. 20.2.25: My Ecothrive Life Cycle arrived yesterday, and the plants are ready for their top dress and a good watering in. I have some Biobizz Light Mix, Canna Coco,and perlite. I'm going to use this as a base to mix my amendments in. I'm going to fill my 5 gallon bucket with about 4.5 gallons of my top dress mix. I will distribute this across 6, 4-5 gallon pots. Then I will water in well with Greenleaf nutrients Mega Crop Parts A+B and Sea K(elp). I've made a crude attempt to video mixing my top dress. Don't listen to the audio. lol, my YouTube didn't stop playing whilst I recorded this 😂 So anyway, I added the following amendments to the above base mix of 4.5 gallons; ♡ 3 TBSP Ecothrive Life Cycle ♡ 3 TBSP Vitalink Bat Guano ♡ 3 TBSP Ecothrive Charge ♡ 1 TBSP RHS Mycorrhizal Fungi granules ♡ 6 TBSP Ground Cinnamon.
Likes
9
Share
Week 11of flower...I got a new 70 pint dehumidifier and that fixed all my humidity issues instantly! I dont see any mold or mildew, so I think I dodged a bullet. I let the girls stay in the dwindling nutrient solution for an extra two days, until Tuesday night. I swapped out with flawless finish and uc roots for the flush. They probably could have had another 5 days or so and got a few more amber heads. I'm Chopping Saturday morning. They smell amazing, a lemony strawberry diesel.
Likes
98
Share
I love growing its a big passion of mine , and the fact that GD exists makes everything so much better, one can interact with others and enjoy and learn from each others. Thank you all growers love and keep them green <3 <3 <3
Likes
6
Share
Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ______________ 📅 D57/B20 - 11/06/24 ⚗️ EC: 1.0 pH: 6.1 🌡️ T: 25°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D58/B21 - 12/06/24 ⚗️ EC: 1.0 pH: 6.4 🌡️ T: 25°C H: 80% 🌊 8 L 🍗 Calmag - Bloom A-B 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D59/B22 - 13/06/24 ⚗️ EC: 1.2 pH: 6.6 🌡️ T: 25°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D60/B23 - 14/06/24 ⚗️ EC: 1.0 pH: 5.8 🌡️ T: 25°C H: 70% 🌊 15 L 🍗 Calmag - Bloom A-B - B52 - Big Bud - Bud Candy 💧 💼 Spinosad and pH- 🧠 🚀 🎬 1 TL video ______________ 📅 D61/B24 - 15/06/24 ⚗️ EC: 1.0 pH: 5.8 🌡️ T: 25°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D62/B25 - 16/06/24 ⚗️ EC: 1.0 pH: 5.5 🌡️ T: 26°C H: 80% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D63/B26 - 17/06/24 ⚗️ EC: 1.0 pH: 5.2 🌡️ T: 26°C H: 80% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video
Likes
4
Share
@GeminiCQC
Follow
I'm expecting at least another week on the hubba bubba as it's getting nice and thick, and I haven't noticed any new pistols form in a few days. The ABxRKO is still trucking, and it makes me excited for the next drop that tree1four did. It smells heavy on the burger side, but not super meaty. It has a slightly sweet gassy meaty smell to it.
Likes
14
Share
Nothing but plain pH adjusted water from now until chop, Any comments appreciated Missed aot of footage on herebut not really ram into any problems.
Likes
3
Share
@Dunk_Junk
Follow
Day 63 - Flowers just starting. They're looking nice. Through the week I've chopped quite a few leaves off her to allow light penetration.
Likes
50
Share
@Njanne
Follow
Not a lot of grow photos this week since we were camping two days' into the backwoods at Temagemi this week :) I have added a video garden tours so you can see what's up this week. The fight against powdery mildew is real. But harvest time is here just in the nick of time!
Likes
12
Share
@Brixx
Follow
Day 19 of flower. Just defoliated. Wondering if I shouldnt cut out more branches. We will see how it looks tomorrow and decide. I am getting good light penetration even lower down. So we will see.
Likes
14
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
20
Share
@GR0WER
Follow
New week starts! 🌞21.11.2022 light smelling started. I kame home today to smell thin delicious aroma my babies producing. It's good and bad in a same time! I gave them their first real dose of ph6.05 GHE nutrients in a proportions so called: 'First true leaves' and sprayed them with 'GHE SeaWeed' solution. (Nutrients input was ph6, drainage - ph6.5) 🌞22.11.2022 New photos downloaded. I sprayed my Bananas with 'GHE Sea weed' once more and moist the upper layer of a substrate with it. My BPPa#1 is slightly smaller then her sister. She have thinner leaves and lower length. But she producing her brunches faster then BPPa#2. Second plant is thicker and higher and her new side brunches are smaller. Now I wonder who'll be larger in the end of this run. 🌞23.11.2022 No watering, only spraying with 'GHE SeaWeed' solution and moisture the upper substrate layer. My moist sensor for soil showing the beginning of a green sector. So watering will be tomorrow. 🌞24.11.2022 I watered my plants by ph5.9 full pack of fertilisers GHE (amount in a table). Luckily, soil ph starts to fall and today it's somewhere near ph6.8 mark. My babies are slowing down in the main stem growth, I think it's all because there are a lot of side brunches rising up. When they'll form it well and their leaves will became darker - I'll change nutrients proportions to so called 'Vegitation' and add 'GHE Diamond nectar' + 'GHE Silicate'. Also, tomorrow I'll spray them with 'GHE Protect' solution instead of 'Sea Weed' because they're still on the early stage of veg. 🌞25.11.2022 Today is 'dry' day. I sprayed my flowers with 'GHE Protect' solution. Nothing new, only one thing: they are awesooooome! Tomorrow there will be 'SeaWeed' spraying, watering will go on sunday. UPD: Asked the advice thru the 'Grow questions' option and started LST already - as a result. Today I can't bend them more, because I watered them yesterday - their trunks are full of juices and I'm afraid they'll crack in a half. Tomorrow I will bend them a little more, and the next day after, I hope, they will be lying on their backs like a puppies. Thank You for Your help, grow mates!💪💪💪 🌞26.11.2022 I sprayed my beautiful girls with 'GHE SeaWeed' solution and moisture the upper layer of substrate with it. Also, I made LST a little more. Substrate ph still near ph7, but they looks healthy and strong. So I'll go with ph6 solution tomorrow and wait them to produce more roots to regulate their environment. 🌞27.11.2022 Some more LST today and 'Sea Weed' spraying. Girl #2 is lying on it's back already, but BPPa #2 is smaller and her stem is shorter. I can't bend it down till she'll grow a bit more. Now waiting for one more floor to grow. Week ends. * Ph in a table is soil ph
Likes
Comments
Share
Likes
6
Share
@IQuSX
Follow
H1, topman ! This is 5-6 weeks of vegetation. At 4-5 week been topping and 5 week been defoliation. >> +1,5 week = switch 12/12! Let's see how beautiful she will be!
Likes
21
Share
OK hi growmies, I'm in to final flush week with purple lemonade. She looks and smells amazing so 7days until we cut her down :() Also wedding cheesecake coming along beautifully. Her aroma is amazing and creamy with the hint of cheese and I j8st cannot wait... i have a couple more weeks for her and Grape gushers... Next week i will have pics and videos or crop from purple lemonade 💜 Still will have curing process and final taste to show and describe. Shout out to these auto seed companies @420FASTBUDS @TASTEBUDZ