Week 9 of flower Use code GROWITGD for a 20% discount over at www.Zamnesia.com They have a wide variety of smart shop and headshop products, such as cannabis seeds, dried plants and herbs, vaporizers, magic truffles, and mushroom grow kits.

Been fighting higher humidity lately during lights off. Other than that environment is in check. I am watering every other day most of the week. I am finding fade on the lower leaves which could be to lack of nitrogen but nothing to worry about as the plants are budding fine. I decided to drop cal-mag this week to try and end up at 1 ml per gallon for the last month. I will keep a close eye for mag deficiency. The stretch is about done by the end of this week.

We are in Flush !! Was giving them GH Flora series + rapid start + cal mag

It's been a good week for the girls they're stretching into flower real nice. Plant height is 14 to 20 inches. I just got the dripper setup going at the end of the week and will be fussing with it till I'm happy. I will be watching the ph and ppm's in the res to make sure they're on point and topping off when needed. Thanks for looking😊

Week 4 flower: all 3 plants left in the tent are pollinated - it's hard to tell to what extent but bud formation has slowed down 😞. Middle plant (Mimosa Evo #2) is definitely the strongest pheno and its trichomes smell like tangerines which is really nice! We did an intense defoliation on Day 24 of flower in an attempt to lower humidity and increase airflow but RH is still dangerously high at 80% because of the current weather. Also gave them a bloom PK top dressing on day 26 because canna coco does not provide a PK boost in their coco nutrient line. Hope to see the buds dense up over the next few weeks without too many seeds ...

Me encantó la cepa y su facilidad de cultivo ! Aun que tuve muchos problemas ambientales y climáticos . Me atrasé unas 3 a 5 semanas con estas nenas , pero nos recuperamos bien ! Usamos malla scrog chilena #kanovicultivo , lo mejor que he usado en malla scrog , no se le comparan , su espacio preciso! . Las 4 comenzaron en pequeños vasos , luego de 1 a 2 semanas , trasplanté a macetero de 5.8lts , finalizaron 3 en maceteros textil 19lts y 1 en macetero de 20lts AirPot ! Comencé a brindarle 20hrs de luz / 4 hrs oscuridad , a la 3era semana 19hrs de luz y a la 5ta semana bajé hasta el 18 / 6 . Usé un panel QB de 480w regulables , chips marca Samsung de 3500k , chips epistar UV 660nm iR , el mix completo gracias a mi bro MKleds chile ! Se pasó ! De todas maneras recomiendo una potencia mínima de 600w ( QB LED ) para espacio de 120x .. Usé un bio estimulante chileno , que a mi parecer fue uno de los mejores que he visto y usado ! El grande #trichomemania , te cuento que este producto activa un mecanismo de defensa en la planta (SAR) , haciendo que reaccione y se trate de defender con mayor producción de resina , terpenos y tricomas ! Es increíble ! A los 24hrs tienes resultados , un saludo grande a los hermanos ! El mejor producto 10000000%.... Grande eva seed , buenisima esta cepa , me dí cuenta que si se deja madurar un poco más , su sabor es más frutal candy , exquisita cepa !.... Estamos probando con un papel de blunt organico 100% libre de tabaco marca *jamaican buzz*...al fumarla su efecto es notorio , enseguida viene el efecto psicoactivo y cerebral , se viene a la vista un tanto distorsionado el entorno ...la vision un poco más brillante , y a la vez relajado .. Hoy 18 de agosto estamos probando con un papel de celulosa organico marca lion rolling circus ( foto al final del album ) , quema bastante bien , al parecer ya está casi en su totalidad secado , combustión lenta , buen sabor afrutado citrico con toques candy diesel ...uuff efecto despues de 3 quemadas ya por los cielos , totalmente cerebral y estimulante , un gusto charlar con amigos ! Al manipular su fruto , la planta expele un olor afrutado con limon maduro y skunk , con finales de candy terra , una delicia , muy buena cepa , ahora mientras escribo me siento un tanto "mareado" con esa mitad de blunt ! Buenisinaaa!... ____ La verdad cuando comencé a cortar cada planta era como llenar "infinitamente" el armario donde dejaría secandola , se llenó casi la mitad y un poco más sólo con 1 planta cortada ! Increíble producción , yo estimo unos 90g por planta aprox , ya he consumido un buen peso además ...veremos en estos días que esté por completo su secado ! Esta riquísima , sus efectos fuertísimos ...100% ... ___ Una cosecha buenísima, muy parecido como obtengo resultados en comparación con el sodio , todo bien me gustó la experiencia !.... Además tuve la oportunidad de hacer extracción en seco de su materia vegetal . Obtuvimos entre un 18 a 20% de retorno ! Para mi primera vez , geniaaaal ! Su utilizó prensa de 12 toneladas , de apretó a 80°C por 4 minutos . . . Usen lemon king ! Una delicia .

Week 4 Flower Bud Set Watered in at 900ml Individual Recharge day and Silica day. Top dressed 2tbs Bloom2 Barley 2tbs

Buenas noches , espero que empecéis con bien pue la semana, yo acabo la tercera semana de crecimiento y estás do sweet dos de sweet seeds me tienen enamorao. . Lo primero, se han trasplantado a final de semana a su depósito real 11L. . La humedad anda entre 60/70% la temperatura está entre 23/26 grados, el led es increíble , y como siempre el ph está en 5,8/6,0. . AgroBeta: 0,8 ml x L Growth black line , vía radicular. 0,2 ml x L Tucán , vía radicular. 0,15 ml x L Flash Root , vía radicular. 0,05 ml x L Gold Joker, vía radicular. . Hasta aquí todo esta semana a sido algo complicado y todavía queda montar la extracción pero es ya lo último. Espero que os guste buenos humos 💨💨💨.

Day 22: Drain EC 3 feet high and risin'😅( average 3.3 to be exact...) dunno how much whatever-salt is building up in that pots, but it obviuosly doesn't bother the ladies. Dark green colour, very few 'claws', no signs of tipp-burn, new foliage appears in a juicy green and turns dark in an instant, leafs point upwards....... looks like they're happy😊. Planns for this week: - Install the scrog-net - Obsereve plants/soil ( when do i have to feed nutrients again?) otherwise there will be no changes...... Thoughts: These bushy babies will be kind of a challlenge to create this scrog the way i'm used to (basically bending the 4 main main colas to the corners of the tent, upper branches to the walls and spaces between the pants, lower branches to the very center). Now these ladies make so many branches, so close togehter and so equal in length, underneath huge fanleafs..... i'd love to have them in a 100 square meter canna-crib....but in a tent...????? I really hate doin' things without having them planned - but in this case i guess i will have to install the net, start weaving and see what's happening😯 Day 23 Let's keep it positive...... indoor-climate of 64% rh is perfect for my health💪😁!!! ......but in my tent it's killing the vpd😖. at a lousy 24 degrees C, i'm readin' about 60-64 % rh wich results in about 0.7 to 0.8 kPa.* More figures? Here come the crazyones👻!: pH 5.5; EC 4.2😨 but thats only drain from plant 3....... average was 6.1/3.6 The girls busy produce roots, shoots and leafs....... still very green, still not unhealthy.......few claws, no tipp-burn. Basically a comfortable place to be: It's not bad yet - no work but watering - and it can only get better!!!😁 *VPD issue solved: The sensor hung too close to a fanleaf - didn‘t expect this thing beeing so sensitive 😅. Day 24 Climbed new hights this morning: Plant 1 had an EC of 3.8 - the others didn't climb any higher than yesterday. So maybe we've reached the climax..... 😇 Visible growth now - so i installed the scrog-net and will start bending and weaving these days:-) Thoughts: Did beeing out of VPD-range for one day harm my plants? How exact can my sensor measure VPD? after a bit of research i found out: Whatever you buy for less than 200 bucks is far from beeing exact! Even professional sensors have a margin of about +/- 1% in relative humidity. Thermometers at least +/- 0.5 degrees C. This could give some a good guess of the actual VPD BUT: Leaf-temperature-offset is absolute key! Many of our trusted homegrow-equippment isn't even able to measure it (some offer default temp-offset) ....don't wanna go further here - but there's no way to achieve something like a precise VPD-measurement in homegrowing. So why caring for VPD? Even with those less accurate instruments, you may be able to keep your plants in something like a comfort-zone. Way better than only guessing 👆!!! In case i ran a much higher VPD than planned, yesterday (due to a missplaced sensor) , it will not harm or kill my plants. they might have had a bit of stress from dry air - but nothing to worry about! Day 24: Decreasing salt-levels in the drain - excepting plant 4, wich had an EC of 4.0 - so i guess i'm slowly draining exess-salts from top to bottom and might have collected some build-up. The girls seem to be quite okay. Root-growth is vigorous (there are thick, white roots penetrating through the pots, everywhere), the stems are relatively thin. removed the LST-lines. the Sc.r.o.g: only materiels needed, were a climbing-net for gardening (HDPE) cut to 90x90 for my 1x1 tent, 4 cable-ties and 2 meters of strong rubber-cord. Pre-installed the net with the cable-ties, then weaved the cord around the outter cords of the net, led it aroud the posts and pulled tight. Then brought the net into it's final position. Not as sturdy as with a wooden frame - but i had less than half the work and a bit of freedom to move things if necessary. Any shoot will now be put to the next outter square (relative to the center of each plant) as soon as can be held by the net, without harming the top. Once i moved all of the dominant colas to the next square, i'll have to take 10-15cm steps (vertical growth), to reach the next square. As soon as i have about 70 of my 81 squares filled, i'm going to flip to 12/12. Since i'm plannin' to have them full of sugar when flippin', i don't expect too much of a stretch. This way i hopefully have the longest and strongest shoots framing the shorter ones in the center - so the canopy shapes like a bowl, in order to achieve the most even light distribution possible. Day 25: The main colas visibly reached out for the light - but yet i only moved 1 single shoot to the next square. Girls look good, EC is dropping slowly, climate fine. CU tomorrow👋 day 26: on Track... nothing to worry about...... till day 28....... Due to high EC levels in the soil, i couldn't do much more than pour out some water and prepare the scrog this week. Next week i will have to do some weaving. If the nutrientlevels allow, i'll do some defoliation.

Buds should be dried in the dark, 50% humidity, at 21 degrees

3 weeks :) The girl looks healthy and happy, now I'm looking forward to her rapid growth and she will get bigger :) Everything is going smoothly :) it will be an interesting experience, because this time I probably won't use LST at all, I haven't tried letting her grow naturally :) good luck to everyone

Plant #1 shows impressive results - the main cola has reached 4.5 cm in diameter and continues to densify. The entire stem is covered with abundant flowering. Natural yellowing of lower fan leaves is observed, which is typical for this flowering stage. Plant #2 (the trailing one) shows good dynamics in bud formation. Estimated harvest time is 2-3 weeks. Plant #3, despite early deficiency issues due to late transplanting and excessive stretching, has successfully recovered. Currently showing active flower formation, especially in the upper canopy. Plant #4 is compact and close to maturity (approximately one week left). Characterized by a large main cola, while side buds are less developed - about 1-1.5 cm in diameter. Trichomes are still white. Considering the strain genetics (8-11 weeks full cycle) and active growth, I maintain daily watering with 1L of flowering nutrients solution.

Halfway through week 3. Both the girls have been transplanted to their final 5 gallon smart pot home. Soil medium is no longer a Light Warrior/Ocean Forest blend; it’s just Ocean Forest now. I don’t think that soil will be too hot at this point. Both plants are on their 4th node, I want to top at the 6th node so hopefully next week. Plant 2 has far more internode spacing even though both plants the same distance from the light. Plant 1 is developing 4 leaves so the fan isn’t symmetrical. Otherwise healthy. Leaves were droopier than usual today which might be transplant shock or I might have overwatered their new homes. Will add more to this week at the end. Love feedback!

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

24.11 : C+4 25.11 : C+4 26.11 : C+4 33cl of fertilizer for all 28.11 : the hydro are turning yellow, i think i will put them in soil, maybe they suffocate ?

Well at last more space in my grow area looking forward for these ladies they are coming along lovely and no issues with them whatsoever buzzing for the end of these beautiful looking girls 😂✌️🏻

Fast fertig

Hi guys, welcome back to Mrs Peaky's Gardens . well....we're almost there...we'll start by washing🌊 the roots of these beautiful girls with thick hair! 😁😉❄️

Brb

Day 50: Girls are looking great! 💪 A couple of them are a little further along than the others. Pistils are starting to change colors. PPM's going in are higher than runoff PPM. No change in the PH. In at 6.5 and out at 6.5.... Still have some rust spots. Still thinking that I need to dial in my light distance/intensity. Day 51: Got one girl that the issue of rust spots is not going away. Not getting worse, but just will not leave. Other than that they are still bulking up and looking beautiful. Can't wait to start checking the tric's! Using AN Big Bud for a couple feeds and MOAB for a couple of feeds. Have been feeding every water as my output PPM's are less than what is going in. Will keep this cycle until needed to flush or an issue occurs.. Day 52: No new updates. They still look basically the same as 5 minutes ago when I checked em!! 😂😂 Day 53: Went ahead and ran 2 gallons of PH'd water through them. This rust spot issue is driving me crazy!!! Will just use PH'd water for a day or 2 and hope that it stops! Day 54: Well, no new spots that I see. Probably too early to tell, but I feel better about it :) Day 55: No new updates today. Watered with Recharge. Day 56: The girls look wonderful and smell the same. Gave them a good defoliation today as they were extremely bushy! Thanks, B for the pointers!! 👊