Well she just keeps surprising me I thought she was close but she just keeps getting bigger and thicker and stinkier so he’ll yeah. She is getting some beastie blooms nothing else at this point.

Melonade RuntZ auto

1-30 She was transplanted. Just covered and sat in the pot. 2-1 So is 3 gallon pot now. 2 tbs craftblend. 1/4 cup worm poo. 1 tsp Mammoth myco. First water in the pot. 500 ml ph 6.0 7ml of activated EM 1 Little less than 1/2 tsp recharge, sicila 1.5 ml Drops 1 ml. Hindsight should have only watered 250-300ml. 2-3 Loves her new home. Stretching all the way out! Momma lost her head. 2-4 350ml water plain. 2-7 350ml 1/8tsp myko .

This 5 plants are absolutely gorgeous, they're supper similar to each to each other beautiful leafs and structure, looks like this lady is gonna provide us with beautiful citrussy buds!! Stay tuned everybody! Great autoflowering strain by SPLIFF SEEDS!

.

LST DONE TODAY NEARLY ALL OF THEM 2 JUST SEEM POINTLESS TO PULL AROUND BUT

Day 56 of flowering of the CBD spliff Berry From Spliff Seeds Getting to the end of the line of this beautiful 2 plants she frosty she smells absolutely amazing and the only thing that is still going on is flushing and i hope i can cut here down Sunday will see i want the ppm to go lower for fine end result i am not going to cut corners on this grow it's looking and going to good for that 23/12/21 Run off was 1600 ppm so almost there 25/12/21 Runoff is around 700 ppm I will be now drying the pots out and then it's chop time for these 2 26/12/21 Day 58 flowering runoff 550 ppm 🤘🏻 There looking frosty smell absolutely 🔥🔥🔥 thricome are where i want them and has a day to go to dry out the soil and then light's out for 24 hours it was a perfect grow From beginning to end CBD SPLIFF BERRY From @spliffseeds 28/12/21 Chop chop 1 CBD spliff berry I have decided to do one wet trim and one dry trim so will be trimming first one tomorrow and goes into dry reck One left to chop good times Happy holidays people hope you have some great days stay healthy take care of the one's around yeah and let next year be more weed and Less fucking corona so i can get my ass to Alberta Canada for month vacation to see if we could move there 🤘🏻🇨🇦🤘🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

🍬

Yesterday i took off some Leafs down there. Looks Like a Bouquet now 😄 She's responding great to the Training i have her. I'm pretty exited how she'll do in the Future weeks 🤙🏽

Update February 4, 2019 (Video and Pics actually taken Feb 1). I’m figuring I’m about mid-way into flower now with the 6 girls I have flowering. Overall, I’m very happy with how things are going. The buds are coming in strong on all plants, they are stinky and sticky and I’m not complaining about anything really. But, I still see more yellow than I like. Last week I fed Recharge, Mammoth P, MegaCrop, and CalMag+. I don’t feed all of those at once, Recharge & Mammoth P one time, MegaCrop & CalMag+ the next, then the 3rd is usually straight water. I also seem to be able to go at least a day between waterings/feedings. Anyway, yellowing leaves during flower seems to be most common with a Nitrogen deficiency as far as I can tell. I’m tempted to feed in a round or two of veg nutes to see how that goes. One more thing… I transplanted my clones and seedlings into larger nursery pots today. They were transplanted into pots with soil that has been composting/recharging for almost a month now based on some of the tips from the books I have been reading. I’m excited to see how they react to their new environment.

Reduced the N nutes this week Everything looks good

🌱Day 36 - Second Week of Flowering 🌱 Hello growing friends! 🌿 Today marks the beginning of the second week of the flowering phase, and I’m very happy with how the buds are developing so far. 🌸✨ Since this is my first grow, I’m truly amazed by how fascinating these plants are. It’s an exciting journey! 🌱🤩 Last week, I struggled with yellow leaves and a calcium & magnesium deficiency. Fortunately, with the help of BioBizz Calmag, things are slowly improving. 🍃💪 Currently, I’ve set the humidity to 45%—according to my research, this is ideal for minimizing the risk of mold. 💧🚫🌿 🌱 Day 42 - Last Day of the Second Flowering Week 🌱 Hello everyone! 🌿 Today marks the last day of the second week of flowering, and I’ve made some updates to my routine. I’ve increased the nutrients to BioBizz Grow (3ml), BioBizz Bloom (2ml), and BioBizz TopMax (1.5ml). The plants are growing well and have recovered from the calcium deficiency. 🍃💪 I’m continuing to add a bit of BioBizz CalMag to prevent any future deficiencies. 🌱✨ This week, I also added some soil to the pots, as the soil level had flattened out quite a bit. I topped up each pot with about 1.5 liters of soil.

CandyMan (kre8 Genetics regular seeds) Week 5 Day 35 of veg! First one has always looked smaller not sure if it's due to that light though but could also just be a weaker Genetic 🤷‍♂️🏼 the other two seem to fill out quickly even after pulling most leaves off they just bounce back looking bushy in 24hrs! Two more weeks until flip 😍

Overall it was quite an easy grow, but one of the seeds had some kind of genetic disease so it looked very different to the rest and produced the least in the end. Alpha: 16g Bravo: 27g Charlie: 19g Delta: 19g Echo: 33g Total dry: 114g It was very clear from the beginning of how Echo was trained that it will yield the most in the end. I need to try to replicate that during the next grows 😁 But overall this strain was very quick and produced extreeemely dense buds 😍

I attempted some LST and defoliating over the last couple of days. I wasn't overly confident as it was my first time so I decided to take a different approach with each plant so hopefully I don't mess them all up haha

The flowers are looking ready for its final stage! The stems are starting to go red, the top leaves are getting yellow, and the trichomes and starting to get white as snow! I’ve started feeding it water and then water with molasses every other day.

The thrips infection is gone but there’re still a lot of damaged leafs as you can see in the photos/videos, but the growth hasn’t slowed down which is good. Anyway after I did some research into the big bang strain I found out that the company that sells this strain recommends “flushing” for a few days every other week starting from day 16 of flowering. This is meant to speed up bud development and I think it really did something here as the buds got twice as big. But I didn’t exactly follow their recommendations as it calls for watering the plants with large amounts of water and letting the soil dry for a few days and I don’t feel comfortable with that, so I watered them every day but made sure the soil was dry.

Legend Timestamp: 📅 Measures: 🛠️ Water: 🌊 Actions: 💼 Thoughts: 🧠 Events: 🚀 ________________________________ 📅 D57/F18 - 19/10/23 🛠️ EC 1.2 (stable) pH 6.0 (rising) --> EC 1.1 pH 6.3 🌊 Added water and nutes (B52, Big Bud and Bud Candy, only little bit of Bloom A and B) 💼 Little defolation and some adjustment on the little one. As I saw some light stress symptom I changed the light schedule to 12-12 but with red lights always on. 🧠 I can't wait to see the buds of Little Marlene reaching out Big Marlene 🚀 Little Marlene is now quickly blooming. Some light burn symptoms on little Marlene ________________________________ 📅 D58/F19 - 20/10/23 🛠️ EC 1.2 (stable) pH 5.7 (falling) 🌊 No water neighter nutes added 💼 Sprayed Spinosad 🧠 🚀 ________________________________ 📅 D59/F20 - 21/10/23 🛠️ EC 1.4 (rising) pH 5.4 (falling) --> EC 1.2 pH 5.5 🌊 Added 5L water, nutes Bloom A - B and calmag 💼 🧠 🚀Little Marlene leaves are wilting down ________________________________ 📅 D60/F21 - 22/10/23 🛠️ EC 1.3 (rising) pH 5.3 (falling) --> EC 1.2 pH 5.4 🌊 Added 2L water and nutes: Calmag, Bud Candy, Big Buds 💼 Made a big defolation and sprayed Spinosad. 🧠 I really hope Spinosad will solve the situation here. 🚀 _____________________________ 📅 D61/F22 - 23/10/23 🛠️ EC 1.3 (rising) pH 5.5 (stable) --> EC 1.2 pH 5.5 🌊 Added 4L water and nutes: Calmag, Rhino Skin, Bloom A, B 💼 Little defolation on the big one. 🧠 Never again two girls germinated in a such big time difference (3 weeks) 🚀 _____________________________ 📅 D62/F23 - 24/10/23 🛠️ @17.00 EC 1.3 (rising) pH 5.1 (falling) @23.30 EC 1.4 (rising) pH 5.2 (stable) --> EC 1.2 pH 5.2 🌊 Added 2 L of water, calmag, big bud and B52 💼 Little defolation on the big one. 🧠 🚀 _____________________________ 📅 D63/F24 - 25/10/23 🛠️ EC 1.3 (rising) pH 4.7 (falling) --> (by setup) --> EC 1.2 pH 5.5 . Check in the night EC: 1.13 (stable) pH 6.2 (rising) 🌊 RES Changed 💦💦💦 -> Added calmag, Bloom A-B, Bud Candy, Big Bud and B52 💼 🧠 Quite strange, but good, pH goes up in that way 🚀