@Patricia_Zamnesia

At a total of 79 days this Sangria is a beautiful one! A cross between The GOGO and Ogreberry she is super delightful, Dense resiny heavy covers trichome buds , with the smell of Gassy rotten fruit funk on the nose! She a stanky one ! Other then that she was a pretty easy grow , y’all don’t sleep on it an better get your hands on it , at @Twenty20Mendocino they got you covered

Second week of flower and I defoliated again. There are small bud sites starting to form at the end of week two flower. The apple fritter has fascination which is making the stems grow interestingly with lots of bud sites.

Spent the past week transitioning to flower light cycle. Daphni is continuing to fill out and have some good growth around the nodes in the middle of the stalk. The humidity lingers @ 55% which is fine. I'm wondering at what week near the end should I turn the dehumidifier on. The radio is still on 95.7 (Classic and Heavy Metal Rock). Daphni's color has remained good this week and she had no major or minor leaf problems so hopefully that will stay the same. I started my Final Bloom Solution today when I changed out the reservoir. I added KoolBloom and some Cal-mag to the solution and my PPM went way up so I hope Daphni takes to it well. The ABLE Grow Chamber is still performing well but I have noticed some green growth along the grooves of the RainForest 66 reservoir. Will clean it with a tooth brush and towel.

Week 3 Veg. ******************************************** Light cycle=18/6 Light Power=90w 37% Extractor controller settings High temp= Day 25c, Night 20c Low temp= c Temp step=0c High Rh= Day 63%, Night 68% Low Rh= % Rh step=0% Speed max=8 Speed min=1 Smart controller settings (during lights on). Lights on=4.00am Humidifier on=-55% Humidifier off=+59% Top fan on=+24.0c Top fan off=-23.5c Smart controller settings (during lights off). Lights off=10.00pm VPD aim=0.5-1.1 DLI aim=16-20 EC aim=0.2-1.4 PH aim=6.0-6.8 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= Autofeed 5 drippers. Feed=Veg Nutes. Neutralise=0.1ml/L Grow=2.0ml/L Roots=0.2ml/L Silicon=1.0ml/L Calmag=1.0ml/L Volume=8L Easy Ph down= 0.125ml/L Ec=1.4 PH=6.5/6.7 Runs=12 Run times=4min (260ml each) Gap times=16min Total runtime=48mins (3.12L each) Total flowrate= 130ml/min (65ml/min each) Auto start time=5.00am Auto stop time=8.44am 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 ******************************************** 📅2/6/24 Sunday (day 15) 📋 Hot today. Humidifier is in grow room now and not the tent. 📅3/6/24 Monday (day 16) 📋 H=6cm D=57cm Dli=17.1 Ppfd=264 📅4/6/24 Tuesday (day 17) 📋 Installed drip system. 📅5/6/24 Wednesday (day 18) 📋 Had tiny amount of runoff at 8.12am 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=nutes Volume=8L Ec=1.4 PH=6.5 Volume left=3.75L Volume used=4.25L Volume each=2.1L Runoff. Total runoff=0.7L Ec=6.3 PH=5.6 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 📅6/6/24 Thursday (day 19) 📋 📅7/6/24 Friday (day 20) 📋 📅8/6/24 Saturday (day 21) 📋 H=13m D=52cm Dli=19.7 Ppfd=304 ******************************************** Weekly roundup. 📋 She looks healthy, but a very strange growth pattern. I'm unsure what I'm going to do with this one for training. I'm just waiting for her to kick into gear and that will determine if she needs any HST. Take it easy. Back soon. ********************************************

2021 - 08 - 29 Wedding Glue Auto 1 - most fan leaf are starting to turn yellow , Hoping she finished up in a week to 2. - Day 55 since sprout - trichomes are mostly milky, not much amber on buds yet. Wedding Glue Auto 2 - Some of the buds and fan leaf with abit of sugar leaf are turning purple... - Day 50 since sprout - She's fattening up nicely image format : Wedding Glue Auto 1-4.1 day 27 Wedding Glue Auto 1( plant strain and tag number) , 4 (week), 1 (image number) , day 27 ( Date since sprout )

Hola que tal? yo me he levantado en domingo a las 08:30 me he tomado un café y me pegado un bongazo de aúpa jaja después, musica y hacerles una sesión de fotos a las plantitas 😇👌🏽 Pues hoy es el último día de la 7ª semana de floración, veo a 3-4 plantas listas para cosecha. Esta semana en los directos de twitch usaremos la lupa para ver el punto de maduracion de los tricomas. Deciros que estoy muy sorprendido con las Harlequin CBD ya que están sacando unas porras muy interesantes con aromas súper inciensados, son plantas mega compactas ideales para espacios pequeños y súper productivas!! vaya tela! Una de ellas está súper oscura y tiene mitad planta color verde mitad morada/negra de locos. Sobre las mimosa pues más de lo mismo, más resina, más cogollos, más aroma y plantas muy fáciles de llevar sinceramente... Los colores morados rojizos y naranjas que están sacando me encantan Que deciros de la Mimosa GB que mutó y desarrolló Fasciacion en una de sus ramas satélite. Da cierto miedo ver el cogollo parece que me vaya a engullir jjajjjaja 90 dias desde que se empezaron a germinar son semillas de gbstrains bajo los leds de gblightning y abonadas con boom nutrients todo gracias a @gbthegreenbrand @growbarato

To update, keeping pics up to date for now

Good

Just let thing be for the week . Still a lot of space so put 2 more of each strain in 15lt pots to fill it out.

Giovedì 21 novembre 2024 Inizio controllo ec 1332 ph Cambiamo acqua e partiamo da 75 lt acqua osmosi inversa ec 173 ph 6.7 Aggiungo tutti I nutrienti e ottengo ec 791 ph 6.1

.

Flipped to 12/12 today with final trim b4 stretch.2 clones taken and both rooted in 7 days in the cloner. Happy growing Nugz 🤞🏴󠁧󠁢󠁷󠁬󠁳󠁿🍁 🍁🍁🍁 Breeder-Mystery photoperiod 🍁🍁🍁 Light-Voost VST 120 https://voost.com/ Discount Code-TightNugs over £200 🍁🍁🍁 Seedbanks-Garden of green,Expert seeds

🌱

Bushing out nicely ✌️🏼

Preface: After initial germination I realized that I didn't have 6 little pots free so I had to 3D print some more. SHOUTOUT!! to Thingiverse user "seajseven" for the model! ❤️ - A 1Kg-Spool prints about 30 of these bad boys so they cost very little, especially in a pinch! =) I had some fears that the ANYCUBIC PLA+ I'm using would interfere with plant metabolism, but after seeing the healthy plants coming out of these pots I dont think these fears were justified. Going on... LOTS of other stuff happened this week! : These amazing! Peaches&Cream had rooted through their initial 0.5L pots a good bit faster than the ICCF2s. I know n=3 isn't really great empirical evidence, but all three have better roots than the ICCF2s, resulting in more vigorous growth. I'm guessing the Peach Candy F2 added some amazing root-genes to this cross?! While I was right on time for repotting the ICCF2 , these could have been done 1-2 days earlier! As with the ICCF2, fresh 3.5L Pots have been prepped with Floragard Professional Grow Mix as well as about 2g/L of an AWESOME powdered Tomato Fertilizer made by Sonnenhof. That shit has saved so many plants and I don't even understand why. You know... you try to do your best with your method BUT SOMETIMES you just have one plant that starts turning yellow and you don't understand whats going wrong?? I gotta repeat that I don't really understand the mechanism here... I'm guessing it is ph related but that stuff has saved so many plants for my brother that i'm now using it myself as an additive. All three of the plants are looking great and the middle one is looking even bigger! ❤️

week intel: its time to harvest top buds! because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. its crucial to get uniformed buds in terms of quality that you let the lower buds to get some extra air and especially light! then the pop corn buds quality will reach the top buds. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.

Sticky Broccoli Auto – Week 7 Update Week 3 of Flower Stretch appears to be finished and the plants have transitioned fully into flower production. Bud sites are forming across the canopy and stacking is beginning nicely. Trichomes are already visible on a couple of the plants, which is a great early indicator of strong resin production. Aroma is developing into a sweet, skunky, earthy profile. Overall plant health looks excellent with strong color and structure. There is very minor tip burn visible on some leaves, which may be the result of allowing the coco to dry back slightly too much between feedings. Allowing coco to dry too far can concentrate salts in the medium and temporarily increase EC around the root zone. ⸻ Light & Environment • Plants have finished stretch and are now focusing energy on bud formation. • UV-A and UV-B supplementation introduced this week at low intensity. • UV schedule: 30 minutes halfway through the light cycle. • Final defoliation completed to open the canopy and improve airflow and light penetration. ⸻ Feeding Log All nutrient measurements are per gallon. 3/3 Started using low intensity UV-A and UV-B for 30 minutes halfway through the light cycle. Mixed ~4 gallons of feed solution. Each plant received about 15% runoff. 940 ppm 5.7 pH • .5 ml Silicium Bloom • 2 ml MagCal • 5 ml Cocos A • 13 ml Cocos B • 4 ml Pure Zym • 2 ml Green Sensation • 2 ml Power Buds • 5 ml Ruby Fulvic • 6 ml Photosynthesis Plus ⸻ 3/4 Added Royal Rush to the schedule at 8 ml per gallon once per week as recommended on the bottle. Interested to see how the 8-0-0 nitrogen boost performs during flowering. 1200 ppm 5.8 pH • .5 ml Silicium Bloom • 2 ml MagCal • 5 ml Cocos A • 15 ml Cocos B • 4 ml Pure Zym • 3 ml Green Sensation • 2 ml Power Buds • 5 ml Ruby Fulvic • 8 ml Royal Rush (weekly) • 6 ml Photosynthesis Plus ⸻ 3/5 Final defoliation completed. Mixed 4 gallons. 1140 ppm 5.8 pH • .5 ml Silicium Bloom • 2 ml MagCal • 5 ml Cocos A • 15 ml Cocos B • 4 ml Pure Zym • 3 ml Green Sensation • 2 ml Power Buds • 5 ml Ruby Fulvic • 6 ml Photosynthesis Plus ⸻ 3/6 Mixed 4 gallons. Auto-watering system ran until about 10% runoff. 1160 ppm 5.8 pH • .5 ml Silicium Bloom • 2 ml MagCal • 5 ml Cocos A • 15 ml Cocos B • 4 ml Pure Zym • 3 ml Green Sensation • 2 ml Power Buds • 5 ml Ruby Fulvic • 6 ml Photosynthesis Plus ⸻ 3/7 Auto-watering system activated until about 1 gallon remained in the reservoir. Each plant watered to runoff. 1180 ppm 5.8 pH • .5 ml Silicium Bloom • 2 ml MagCal • 5 ml Cocos A • 15 ml Cocos B • 4 ml Pure Zym • 3 ml Green Sensation • 2 ml Power Buds • 5 ml Ruby Fulvic • 6 ml Photosynthesis Plus ⸻ 3/8 Mixed 4 gallons. Approximately 2.5 gallons used. Each plant received a healthy amount of runoff. Plants are looking very healthy and bud sites are stacking nicely. 1100 ppm 5.8 pH • .5 ml Silicium Bloom • 2 ml MagCal • 5 ml Cocos A • 15 ml Cocos B • 4 ml Pure Zym • 3 ml Green Sensation • 2 ml Power Buds • 5 ml Ruby Fulvic ⸻ 3/9 Mixed 3 gallons. Each plant watered to light runoff. About 1.5 gallons of feed solution remained. 885 ppm 5.8 pH • .5 ml Silicium Bloom • 2 ml MagCal • 5 ml Cocos A • 15 ml Cocos B • 4 ml Pure Zym • 3 ml Green Sensation • 2 ml Power Buds • 5 ml Ruby Fulvic ⸻ 3/10 Finished the remaining nutrient solution from 3/9. No runoff. ⸻ Nutrient Function Overview Silicium Bloom Provides potassium silicate to strengthen cell walls, improve structural strength, and increase resistance to environmental stress during heavy flower development. MagCal Supplies calcium and magnesium which are critical for chlorophyll production, cell structure, and preventing deficiencies common in coco. Cocos A & B Primary base nutrient supplying macro and micronutrients needed for flowering growth. Pure Zym Enzymes that break down dead root matter and organic debris in the root zone, keeping the rhizosphere clean and improving nutrient uptake. Green Sensation Bloom enhancer designed to increase flower density, resin production, and final yield. Power Buds Encourages rapid flower initiation and increased bud site formation. Ruby Fulvic Fulvic acids improve nutrient chelation and transport, helping plants absorb nutrients more efficiently. Royal Rush High nitrogen microbial feed that stimulates beneficial microbes and increases metabolic activity in the root zone. Photosynthesis Plus Beneficial bacteria that enhance photosynthesis efficiency and root zone microbial activity.

No issues so far, dope soil is legit 6/20 Topped the first Gelato of Advanced Seeds