This is my first grow getting back into it after a 25 yr absence.

Just put them into flower.

First day of flipping to flower

Hi guys, so I chopped the little gelatocake 3 days ago and its hanging in 55% humidity and 15°f, I have taken a sample bud, you no how it is lol. Sherbert mimosa are struggling along and going purple 💜 bit cold here lately, starting to fatten up a bit now, the baby photos are growing fast but need repoting. Happy growing guys 💜💚💪

End of week 22: Overal it was a good run with the Shamans from @DutchPassion_Official . Didn't had mayor problems besides having to harvest them earlyer. I really wanted to flower them another 2 weeks but the weather/climate didn't allow me to. Still the buds came out decent as you can see for an early harvest. I will cure those buds for some time in my pots before they get smoked and will update how much weight I got out of the two plants. As you can see I made the bigger buds smaller. There is no use for me to keep big buds for showing off. Big buds just have big long stems in it, harder to dry and to fill your cure pots with.

Así van las 2 Gorilla Rainbow y las 2 Gorilla White de BSF SEEDS terminando la 3ra semana, se realizó el trasplante a maceta definitiva de 11 lts y posteriormente una poda apical a cada una de ellas. (Se vienen más apicales) Se viene bueno esto, estimados!!! Nos fuimos🤙🤙💨💨

This week the plant almost doubled in size, i must add that we had very nice weather and stable temperatures, shes getting sunlight from around 7AM to around 15PM-16PM and after that just daylight, i dont think i can harvest before the competition ends so bad luck, but its still great to grow this strain, cant wait to see her full of buds, hopefully they get fatter than my last balcony grow, but of course i had some bad weather with my last balcony grows also this one is in a much bigger pot which i really notice 👌😀 22 august: nothing 23 august: nothing 24 august: water 25 august: nothing 26 august: nothing 27 august: water 28 august: nothing

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

My first time making alcohol tintcure Using the c1 , Hold on tight gonna be a trip

Really massive buds.. 108grams dry buds

Prevista perdita di peso tra il 65 e 75%

The High intensity was to strong (clearly my fault) in the beginning which stunted her overall stretch, she however still delivered super dense, terpene and trichome loaded buds.

A big hello to all the cannabis growing gardeners...and all the other visitors that came across my grow journal. I'm a little bit late with starting this grow because the plants will finish around end of december or so, so i'm basically counting on a warm december :) It was supposed to start earlier, and I did germinate 11 seeds last month but only three of the lot sprouted out, it was totally my fault and i did abort that grow so we could start with a clean slate and at least four plants....so here we are ;) All three Do-Si-Dos seeds popped after 36 hours in a glass of water and after planting them in rockwool cubes all of them sprouted. My original plan was to grow Kalini Asia and all of the Kalini Asia seeds popped after 36 hours in a glass of water, but thanks to my thick awkward fingers the little seedlings were manhandled by my big hands and non of them came out from the rockwool cubes...my fingers are killers to most of my little sprouts :/ Sorry for that Zamnesia. We were gifted Do-Si-Dos and Kalini Asia seeds by Patricia from Zamnesia 🙏 Thank you Zamnesia, for giving me the opportunity to try out your stock. It's the first time we get to grow a Zamnesia cultivar. https://www.zamnesia.com/uk/7686-zamnesia-seeds-do-si-dos.html https://www.zamnesia.com/uk/5165-zamnesia-seeds-kalini-asia-feminized.html This whole grow's main sponsor is Spider Farmer and as such I added a video of unpacking one of the parcels I got from SF. Here are the links for people interested in the Spider Farmer products that are presented in the videos: https://www.spider-farmer.com/products/spider-farmer-30w-uv-led-grow-light-bar/ https://www.spider-farmer.com/products/spider-farmer-30x-60x-jewelers-loupe-magnifier-for-led-light/ A big thank you to Jessie and the whole Spider Farmer crew for supporting my effort to grow the best cannabis I can. Let's get this started already! Thank you for your visit, please leave a like and hope to see you beck here in about a week.

Day 21 Of flower I did a lollipop / heavy trim (feel like I could have done a lil more) and I have to say I'm running out of room with my lights it's pretty much at 9 inch away from the tallest part of the plant the ppfd high but using a phone app But not seeing no burn on the leafs The intake of water has been up to a gallon an a half (always do some kinda of runoff) pH has been around 6.1 Day 23 Of flower and I added the AC infinity fan (day 1 of fan(actually couple hrs and I think I been missing out on a oscillating fan so get one) still been slowly uping the dimmer it's been getting warmer in the tent so I turned my AC on NOTES: ( btw it's April and I live in a new apartment and pretty much start growing after a month or so of moving in(moved in November started in the middle of January) and seems like this place holds heat so it's going to be a hot summer) but I can see myself down the road getting a (portable AC for the drying if I want to reach that 60°/60% ) plus that dehumidifier kicks off a some heat and my dumbass is growing in the room I sleep in so since all this I've slept on my couch a few times and plenty more to come

Week 9 concluded with great progress and minor issues! She continues to stack on inflorescence and is frosting up nicely in the heat of the summer sun here. There hasn't been rain here for some time and the days are well into the 90's Fahrenheit. She spends most of the day outside and still comes into to bask in the 400W HPS while it's dark out. I try to give her a 4 hour lights-out immediately after bringing her inside for the day. I'm seeing leafhopper damage here and there but inspections haven't turned up any culprits recently. I saw them daily back in the spring when she was in veg but they seem to have moved on. I've ordered some spinosad soap in case they continue to damage the plant. As always, I overfed N during flower and she's clawing up a bit on me. Since then, I've been hitting her with plain water only to try and flush out some of the excess. Following manufacturer recommendations for nutrients always seems to bite me. Especially since all say not to stop with Grow, Part A, etc.. once flower begins. Clearly, I'll need to dial back the amount in the future. She seems to be progressing nicely in spite of these few issues though and overall I'm very happy with the genetics Dinafem has lovingly created. Thanks for following along and please click "Like" below if you dig what I'm doing here. Cheers! 👊🌱☮️✌️

Blue Cheese is officially in beast mode. She’s spread wide like a bonsai and with over 30+ bud sites across a flat canopy. Every top is reaching for the light—she’s stacking up nicely and loving the MPK boost. The smell is starting to whisper cheesy promises, and the stretch is just about done. Leaves are praying, growth is explosive, and airflow is steady. To do list Light defoliation to open up lower sites. Feeding bloom nutrients + MPK for stacking.

Merlin Mintz is looking good. She is finishing up bulking. She will go to ph water in a few days for a flush. The next update will likely be the harvest. Everything has gone well. The colas have a nice color, and smell. Thank you Aeque Genetics, Spider Farmer, and Athena. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

not been a good grow. but it's ok. all part of learning process. i think the soil i used this time is not good. but one of the gals died. she sprouted late and slow growth and just never bounced back. probably overwatered as well. im not sure. but its ok. 2 of the gals doing well. another 2 just kinda slow.