Didn’t stretch a lot stayed nice and bushy just need to lift it up a bit but looking fire this one so green and heal

the temperature is rising and spring has arrived. Hopefully it is the best for her. she has very big buds, which makes their weight down. hopefully they keep growing and my dog ​​doesn't eat them

Day 71 - Starting week 11 and she’s coming down the end. She’s mostly milky and can’t really see but a couple clear trichs in there, plus a few amber. I’m just waiting now for her to get about 25% amber then I’ll chop. Should be ready for some water in another day or so and read somewhere to give her iced water so gonna try that and see what it does. Loving all the orange and yellow colors that are coming out in her and such a sweet strong smell. Day 72 - She’s was dried out so gave her 2 gallons of water with 5ML of MagiCal and 80ML of Sugardaddy from Technaflora to try and finish her up. She’s probably got about 10ish days left, all milky trichs now and can see she’s starting to amber up a bit more. This could possibly be her last watering but may give her one more drink before chopping. Day 73 - No updates really, just waiting for her to dry up and get the chop. Still watching the trichs and all milky with a few amber still. Day 75 - Still just waiting for her to amber up before chopping and hopefully she’ll get a bit fatter before hand. She’s already rock hard and smells amazingly sweet, should end up being a good smoke in the end. Day 76 - She’s getting a little more amber in here so this is going to be her final week. I’ll give her one more drink of plain water tomorrow and let her dry out till chop day. Day 77 - Ending week 11 and gave her her last drink of water tonight. She’s gonna a ton more amber trichs so will be chopping her some point this weekend, possibly Sunday. She’s showing some amazing colors and smell as well!

Week 11 January - 17 January

Definitely can't wait to grow this strain again with all autos and run 18/6 the entire time.

Decided to harvest . Some amber . I wanted a more head high so pulled . Smell is very dank a potent . Will update dry harvest and weight ASAP . Big buds main cola line two cone cans. Overall happy .

I did not grow these two plants to their potential. Hit with high temps as seedlings and fungus gnats in flower, I decided to harvest them probably 7-9 days too early. Nonetheless, after 4-5 days drying, they've been trimmed and jarred and tested. Smoke is very complex and honestly have never smelled such a strong incense like smoke rolling off the pipe before. Very clear and relaxing so far. Delicious grapey spiced beer flavor. Very white ash. So happy to have a larger lady of this being finished properly right now.

Estamos en plena floración ya engordando esos buds resinosos de las Withe Widow de RQS. Subimos la dosis de nutrientes y como se puede apreciar ningún síntoma de estrés o exeso de fertilizantes Todo muy bien recibido 🙌🏻 Vamos por mas ❗️

She's doing good this week.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

There all going steady this an aquaponic setup any questions or advise an comments would be appreciated happy growing!!

1/10 Week 9! Tara is just turning into a beast at over 3 foot she is taking over and the light is 5 inches from max height... hello super-cropping if I cant bend and secure the tall ones down some. Giving Tara as much room as possible and alternating between Cal-Mag and Magnesium Sulfate (Epsom salt) foliar feeds just to cover the bases as the rapid growth seems to be causing slight def. Defoliated both plants a good bit today, Ripley more so than Tara as that is just the leafiest dam plant. Upping feed to the high end see how they handle it, shifting feeds to mornings rather than lights on in evenings for my convenience. So they will get two feeds rather close together to make the adjustment. Since the next two grows are photos and the light schedule will be "on" at 6AM this is what needs doing. 1/14 New pics Defol Ripley further, never seen so many leaves. Only two plants in tent so lots of room for Tara which really needs to stop stretching NOW. 😅 1/15 Pic Bend and secure on highest branches on Tara lowered her about 3" so dropped lights 2" could not justify super-cropping in flower. Ripley looking damn good

Praticamente ultima settimana vegetativa per loro, una gorilla skittles è già enorme e in fase di fioritura, il tempo ha iniziato ad essere sempre buono per loro, non sono molto esperto nell' outdoor, quindi spero che il risultato finale sia più o meno appagante. Mi preoccupa soltanto la cherry cola che inizia a tirare fuori i pistillo ma di crescere non vuole saperne, aspettiamo.. Sapete com'è..😅😅🤞🏽

11/20/23 - Day 14 - Today the box flipped to Veg state. I made the decision in the software yesterday, its take effect the next day at the light on schedule. The system will do a couple of things now that it's in Vegetative mode. Lights will remain at 18Hrs On/6hours Off, however the intensity will slowly creep from 30% intensity to 100% within a couple of days. Air Temp will remain the same at 79deg. F Humidity will go down to 50% Water temp and PH will remain the same, 64.5deg. F and 6.0Ph Because I have it all hooked up for Auto water. It started the first video about 1 min after lights on. It drained the water, refilled it. After it refilled it, it turned on the air stone, started the water temp cool down, and it slowly over the next 30 minutes delivered nutes, and finished it off with balancing the PH. All of this was done on its own. I DID NOTHING. Other than verify because why not. I sat back and watched the system work. This time around with everything hook up for auto I really am not doing much. The hardest part of this grow so far is not opening the door while the light is off. the rest of the week I don't expect to do much. I will update daily with pictures and things that I am noticing. This is an Auto strain. I am a little worried about growing an Auto in this box. usually, I can control the growth utilizing the lights because I'm space limited. This time the plants going to flip to flower on its own. I'll need to make sure I am training and cropping early on. 11/24/23 - Day 18 - Everything is starting to get aggressive in there. I say that because the new nodes are growing out of new nodes on the top. It's like its packed full of plant and it all wants to come out at the same time. The leaves have more serrated Leafs than I have seen on any of the other strains I have grown. Ill post a picture of the last time I grew this strain. I did it in Coco Coir. It will be cool to see the differences. 11/25/23 - Day 19 - The Leaves are all reaching up, and the plant is growing so fast! Its such a bushy plant.

🌱🌞🌱Week4🌱🌞🌱 Bruce is much smaller, LST is almost completely tied to the ground, but looks super healthy. All the side shoots have now been directed and I hope that she will now grow nicely upwards 😅 Sherbet is my queen in this grow so far 🌞 It's just fun to watch the beauty grow. To start the fourth week, I removed some leaves today and directed the shoots in the right direction, otherwise Brucie will soon be completely overgrown 😂 but hopefully it will also have the effect that the good energy of growth will now go in the right direction.... I'll be surprised. Now she looks like a beautiful chandelier 😎

Day 80, 2nd of December 2020: Tall and twisted look at the main stalk haha.... Nice plant clearly she wi be a green pheno the small bonsai version is purple :) Not problem at all but i noticed something. She may be a bit hermie because the bracets are so strange. I am not sure yet may be the nature of the gentics. Anyways all good she is developing buds but slower than the other one Lamp is now on 11 hours and off 13 hours. Every week 15 minutes was taken off and after 4 weeks here we go. Strated 12/12 and now 13/11 wanted try to imitate the nature as the light days are getting shorter. Fertilization has changed no more epsom salt from this week and I will stop giving nitrogen as well from next week. Let's see what happnes next Hehe :)

The start of cultivation was not at all favorable at temperatures below 10 degrees then came a storm that caused cracks and tears in the leaves ... The leaves were very dirty from clay and perlite, so I tried to wash them all with a paper tissue. The weather was not at all kind, so I added Advanced Nutrients- B52 vitamins and Rhino Skin to strengthen the stem and leaf I often meet different animals on my way through the forest, today I met a newly born young fallow deer