Processing
Likes
Comments
Share
@
Follow
Likes
2
Share
@BabyBilly
Follow
She’s stretching a good amount… I did lollipop before I flipped and it’s grown back aggressively which I’m happy about. Hoping slows down on stretch. I’m just over 2 weeks of flower so I’m hoping she doesn’t stretch much more. She’s very healthy and the growth is fantastic. A lot of new branches. She really filled out. I’ll have my work cut out for me on day 21 for defoliation. Very happy with the growth so far. I did supercrop some of the taller aux branches cause they’re getting up there. Just don’t want them getting out of control. This pheno is supposed to to be able to handle stress.
Likes
31
Share
I cut down the 2nd half of my Green Crack plant today. Did a wet trim this time. Will post the harvest report after she's dried and cured. So far the buds seem loose and airy overall. Probably stressed her out a little too much with the topping, HST and then the LED burn. I'm still pretty happy with the results so far 😃 Root sone looks more developed than the last harvest (Blue Mammoth). I guess Recharge is working 👍
Likes
8
Share
Muy contento con la salud y el rápido desarrollo de esta genética, del banco strain machine
Processing
Likes
12
Share
@Piablo
Follow
Lessons learned from week 1 of my first grow so far: the best watering solution I found so far is a mix of distilled water from the store and filtered tap water. with a final ph of 6 and ppm of 20-40. a little ph buffer goes a bloody long way. Use with caution. performing tasks like mixing solution and potting a germinated seed are best performed without a phone (camera) in one hand. the seed germinated within 24 hours using paper towels. I planted after 36 hours. After 24 hours of potting, the stem was already shooting up, and I turned on the lights, set to an 18 hour schedule. I wasn't quite ready for this, so it took me some time to research and get the desired humidity and temperature. At this point I added more nutrient in even quantities of FloraGro, FloraMicro, and FloraBloom, according to instructions. Perhaps a little early though, although after just one 18 hour light cycle this plant is shooting up like a rocket and showing leaves. I bought a fan for the inside of the tent and propped it up on a box, and a humidifier to bring the humidity from 40-50% to around 70%. Since it's a winter grow, I have to periodically increase the temperature to keep it at 25 °C. The intake fan, humidifier, and inside fan are significantly lowering the temperature. I'm also experimenting with finding the right humidifier settings since the humidity seems to increase a lot when the lights go out, and the machine is still new.
Likes
5
Share
In the past week, one of my Forum Stompers has gotten massive compared to the others. I'm not sure if it's different phenos or me just stressing them out. I'm guessing it's stress. Hopefully the other 3 start to hit their stretch this week. I did some defoliating this week, and spent a lot of time on the big tall one. She's really opened up and catching a lot of light. I'm hoping the branches really start to get heavy and frosty over the next couple of weeks.
Likes
6
Share
Day 33 she’s beautiful and flowering and wonderful. I’m really excited for how she’s turning out. I used recycled dirt for the first time ever because they were my last cycle for summer break. But she’s impressing me like always none the less. can’t not wait for her!
Processing
Likes
12
Share
ok so the critical mass x 3 and white widdow x big bud x2 have really exploaded in the last week i can see such a big differnce in just a week of growth. so i decided to do the plants first toppings from 4th node with great results applied this technique along with some light lst training cant wait to see hows these plants progress through the veg cycle im lil worried i may end up having space issues whixh is why im thinking of moving the barnys farm lsd clones outside soon
Processing
Likes
22
Share
@dutdut
Follow
Very happy with the end result all three plants look pretty big. Hard to believe this little 325watt light powered these beasts! Plants are fading and looking nice.... about another week until harvest!
Likes
2
Share
Ya estamos en plena floración y con las luminarias a max potencia... Evidentemente el aire acondicionado también está trabajando durante la fase de encendido. Flowa-Bloom es la estrella de los nutrientes a incorporar, pero todos son importantes... Así que sigo la tabla de fertilización de JUJU Royal al pie de la letra. Eso si, primero humedezco bien el sustrato con agua, para aprovechar bien la solución con los nutrientes y que no filtre por las macetas textiles. Riego cada cuatro días.
Likes
33
Share
@Borberad
Follow
Die letzten Tage gab es kein Wasser mehr und 48h Licht vor der Ernte. Anschließend wurde die Pflanze im ganzen geerntet einen Tag über aufgehangen und anschließend die einzelnen Buds zum trocknen in den Cannatrol verfrachtet. Nun harren wir der Dinge und freuen uns jetzt schon auf fruchtige Terpene.
Likes
13
Share
Welcome Back liebe Community 🌱💚 Frozen Biscotti von Dutch Passion on the Run! Die vierte Woche ist vorbei (Wachtumstag 28) und die Pflanze legt mit dem Wachstum nun richtig los. Sie ist 32cm hoch und die unteren Seitentriebe bilden sich mehr gestreched aus und erreichen fast die Höhe der Main-Cola. Ich denke bald ist es angebracht ein Topcut anzuwenden. Außerdem habe ich dir Pflanze bereits defoliert um im unteren Bereich der Pflanze eine bessere Auslaüchtung zu bekommen. Diese Woche kamen 3ml Orgatrex mit in das Gießwasser. Die Umgebungsgegebenheiten sind aktuell gut: ————— 🌞 Temp: 26 🌚 Temp: 18°C bis 19°C 💨 RH: 64% VPD: 0,83 kPa 💡ppfd: 330 mpm ————— Viele Grüße 👋
Likes
15
Share
Start of day 63 hereNot much that I can mess up just flushing with r/o water PH 6.4. However I've learned a lot over the last couple of weeks, thanks to all the great advice and photos in every diary here. My big lessons are that you add nutes at a considerably lesser rate than recommended, in my case especially since I amend my grow medium. Also add all nures in the correct order and ph before finally adding any innoculent such as my home made lactobacillus. I'm working on the don't over water in veg thingy. I learned that I really need more distance on the lights in bloom, as I finally raised them 2 inches a few days ago and have probably doubled the size of yield by doing that alone, they literally jumped up. Finally, well so far I see from a lot of other diaries that I've been wasting a ton of space, so I will try a SoG on my next grow to get a better yield. Checked the trychomes this morning , mostly still frosty a few opaque no amber. Allright thanks again and leave a couple for seed. Day 66 getting close, may harvest tomorrow. I took 2 plants to my brother and he was impressed enough to order some MARS HYDRO and such. We put the 2 plants I gave him in the yard until he gets a closet setup. So my harvest will just be 2 plants. But hey, I'm no longer his gardner haha. Posted a few pics the trychomes today are starting to turn. Happy happy. Day 69 we drove by a dead skunk today and my wife started waving her hand in front of her nose while lowering the window. I couldn't smell a thing. So I guess that's why I clicked, smells normal.
Likes
51
Share
1/14/24 - Day 68 - Hello and welcome to water change day!!!! Another easy water change in the books. Currently, the nutes are being applied and mixed. Something I have been adding this entire grow is the root armor. It's an additive to the water, it takes the naturally decomposing organic material from the roots and turns it back into nutrients that the plant can use. I have used it every week thus far. The last grow I forgot I got a small bottle of it. I was able to purchase a much bigger bottle for from the Leaf store. That's one more thing that's awesome about the Leaf box. They have EVERYTHING you need to grow and the pricing is fantastic. 1/17/24 - Day 71 - Everything is looking great. I'm noticing the buds are starting to grow outward and get bigger. Its also getting much smelly in there! Ill keep updating with pictures every few days.
Likes
8
Share
Hello Diary, Milky Way F1 is the most impressive of the three on the farm, at least for me. It is the tallest, 54 cm, with a beautifully pronounced main cola and branches filled with flowers. She is so beautiful. The leaves are of a healthy green color, the flowers are large and cover the entire ends of the branches. The smell has become more intense, which gives me special pleasure when I open the grow box. Watering has become more frequent, every three days each plant on the Farm receives about 2.5 liters of water. I continue adding Bio Flowering Booster and Easy Bloom tablets. Conditions on the farm are good. The temperature is around 28 degrees, while the humidity is around 45%. Here's what it looked like last week. 06/06/2023 - Day 38. Watering. I added all three components from the Bio Flowering Booster. pH I lowered it to 6.0. Each plant received about 2.5 liters of water. 09/06/2023 - Day 41. Watering. This time I put one Easy Bloom tablet in 7 liters of water and watered all three plants on the Farm with that amount. 10/06/2023 - Day 42. End of the sixth week. I photographed the plants and removed three or four yellow leaves. Milky Way F1 - 54 cm That's all for this week, thank you all for your support and see you soon.
Likes
2
Share
? Blueberry Muffin – Pheno A Week 5 | The Beginning of Automation Some weeks are about explosive growth. Others are about building the foundation for everything that comes next. This week was definitely the second. Blueberry Muffin Pheno A has officially entered that fascinating transition where vegetative growth begins to merge with the first signs of flowering. The structure is now well established, side branches are reaching confidently toward the canopy, and every day she looks a little less like a seedling and a little more like the productive plant she’s destined to become. One of the biggest milestones this week wasn’t something the plant did… It was something I changed. ⸻ 🤖 Welcome to the AutoPot System This week Pheno A officially moved onto the AutoPot irrigation system. For anyone unfamiliar with it, an AutoPot is a passive watering system that feeds plants from the bottom rather than from the top. Instead of watering every day, a reservoir supplies nutrient solution through tubing to an AquaValve located underneath each pot. The AquaValve is actually the clever part of the entire system. Rather than continuously flooding the tray, it works like a mechanical float valve. As the tray empties and the plant consumes the nutrient solution, the valve automatically opens and refills the tray to a precise level before closing again. No electricity. No timers. No programming. Just simple engineering allowing the plant to decide when it’s ready for another drink. The result is a much more consistent root environment while eliminating daily hand watering. ⸻ 🌱 Learning a New Way to Grow Whenever I introduce a new piece of equipment, I don’t simply install it and hope for the best. I observe. I adapt. I learn. Because the nutrient solution now remains inside a shared reservoir, I also adjusted the feeding program. Some additives that perform wonderfully during hand watering aren’t ideal when they remain sitting in a reservoir for several days. For that reason, Sugar Royal and Power Roots were removed from the reservoir while continuing to use the remaining Plagron nutrients that are perfectly suited for AutoPot cultivation. It’s a small adjustment… …but one that helps keep the nutrient solution cleaner and more stable throughout the week. ⸻ 🌿 Growth Update Blueberry Muffin has responded beautifully. Internode spacing remains tight, the branching continues to develop evenly, and the canopy is beginning to spread naturally without forcing the plant into shape. The side branches that only recently sat beneath the canopy are now confidently pushing upward, creating the framework that should support numerous flowering sites over the coming weeks. The bird’s-eye photographs really show how symmetrical she’s becoming, while the side profiles reveal just how quickly those secondary branches are catching up. It’s one of those moments where you stop looking at individual leaves and start seeing the architecture of the plant itself. ⸻ 🌡️ Environment The room continues running intentionally warm. Day temperatures reached around 31°C while relative humidity averaged approximately 72%. Normally those humidity numbers might raise eyebrows during flowering. However, this is still the very beginning of bloom, where maintaining higher humidity encourages vigorous growth, active transpiration and continued expansion before the flowers begin stacking seriously. As flowering progresses, humidity will gradually be reduced to create a safer environment for dense buds while maintaining an appropriate VPD. Everything is part of the plan. Nothing is accidental. ⸻ 🍽️ Feeding This week’s reservoir was prepared using: • Terra Grow – 1.8 ml/L • Terra Bloom – 1.9 ml/L • Pure Zym – 1 ml/L • Power Buds – 1 ml/L • pH adjusted to approximately 6.05 • EC around 1.83 mS/cm By keeping the solution simple and reservoir-friendly, the AutoPot system can do exactly what it’s designed to do—deliver a consistent nutrient profile every time the AquaValve opens. ⸻ 📸 This Week Behind the Lens The photographs this week tell the story perfectly. Bird’s-eye shots reveal a beautifully balanced canopy beginning to fill its space, while the side views highlight strong vertical development and excellent branch formation. One image captures the AquaValve itself—the tiny mechanical heart of the AutoPot system quietly doing its job. Another shows the reservoir that now feeds the plant automatically, reminding us that successful growing isn’t always about adding complexity. Sometimes it’s about making things simpler. ⸻ 🔍 Looking Ahead Next week should be incredibly exciting. With the AutoPot system now fully active and Blueberry Muffin comfortably settled into automated feeding, I expect vertical growth to accelerate as flowering becomes more established. The coming days should reveal the first real stretch, increased flower development, and an even more defined canopy. The real show is only just beginning. ⸻ 💚 Thank You A huge thank you to everyone following this adventure—from day one supporters to those who have only recently joined. Whether you’re here to learn, share ideas, ask questions, cheer the plants on, or even challenge my methods, every interaction helps make this diary a better place for growers around the world. Special thanks to: 💚 GrowDiaries for providing a platform where growers can document their journeys openly. Zamnesia for the incredible Blueberry Muffin genetics that continue to impress with their vigor and structure. 🌱 Plagron for supplying the nutrition and soil that keep these plants thriving. 💡 Future of Grow LED for delivering the light that drives every stage of development. And finally… Thank you for taking the time to follow along. Every comment, every question, every bit of encouragement—and yes, even every constructive criticism—helps this project grow alongside the plants themselves. Growers Love and see you next week, where I hope Blueberry Muffin begins to show us exactly why she’s earned her place in this 8×8 adventure. 🌱💚
Likes
18
Share
I had not finished updating this diary since I came back I show how it ended 💚👽 the girls got too big and the situation almost got out of hand ... but in the end everything went well and the harvest was endless! thanks to everyone who came to visit the diary🌱
Likes
106
Share
Still no sign of flowering. Transplanted Novarine plant 2 into a 50-liters container. The spot is under a big shorea plant. Shorea is a South East Asian medicinal tree. This is minimum light spot in my yard. Hope she would flower. I choose plant 2 because I think plant 1 will stretch even further. Plant 1 was also moved to a shaded spot under an tree jasmin. This Millingtonia, Indian cork tree. I have sweet flowers all year round. People told me that dried tree jasmine flower mixed well with weed and is good for people with ashma and sinus. Kind of useless since why would asthmatic people even smoke? Plant 3 is my back up until I come up with a way to put her into flowers. Clone are doing nicely. And I am growing 3 clones from plant 1 and only one clone from plant 2. I’ll be donating the rest to friends with weight and blood sugar issues. By year end, I probable keep only one or two clones. One clone from bigger branch is growing just fine without any benefit form lighted grow box. Feeding plants with mid-level dose of cow manure tea and earth worm casting tea to keep leaves healthy. They should have been given a light dose of fertilizer. However, the flowering purslane are also eating and feeding soil microbes. Got my paws on triancontanol and brassinolide. Perhaps these will jolt Novarine THCV into flowering. Triacontanol won't dissolve in neither water nor alcohol. And it is emulsified with polysobate. Mixing of Triacontanol Triacontanol does not dissolve in polysorbate. It is rather emulsified. Means that it need to be melt and there need to be water added. My steps, 1) heated 70 grams of polysorbate in a big heat resistance glass cup. I used a beaker. Mix in 5 grams of triacontanol. And it does not melt. 2) Put in 100 cc of water and put in microwave. After the mix is boiled, triacontanol melt. There is foam. So a bigger cup and a spillage plate would prevent problem with my better half. 3) After heated, the mix is better. Then I added hot water from to make total 250 CC of solution. Then, the mix is clear. 4) Label the dose with pencil. This works better than labeling with ink. I use 5 cc at a time for my entire garden. 250 CC would last me 50 doses. No need to buy so much. This is cheap. Let’s see next week how effective they are.
Likes
30
Share
more liquid seaweed foliar spray and Silica. Pre flower has not started on this plant yet, prob due to the fact it was put out 2 week later than the rest which are in full pre flower. plant has grown a whopping 18" this week. Amazing!