Recommended
Likes
Comments
Share
This week is another wet week with 72% humidity!! I am watching really closely for bud rot. And, I tend to get nervous and take a plant down too early when it rains so much. I can't really feed them any nutrients either because of all the rain. The good thing, however, is my skunk of doing really well considering the hail storm and broken stem it has had to endure. Miss Skunk has been brave and withstood the test of time. She has long, thin stems but she is packed with small buds and lots of resin! Royal Queen Seeds says, "Sweet Skunk Auto seeds produce plants that grow to a very manageable height of around 60–100cm, which translate to 40 inches. My Skunk is currently 36 inches!! Sweet Skunk Auto seeds are ready to harvest just 11–12 weeks after sprouting." So, I should be ready to take this down pretty soon.
Likes
129
Share
She is a thirsty lady, what do you think of my amateur budporn movie? Lol
Likes
3
Share
@elsolo1
Follow
- Third week Came back from my trip and she really shot up PH was down (around 5.5) so she absorbed a good amount of nutrients while I was away Changed reservoir with a dosage of Base A- Base B- Vege- Silica- using 1.0 ML per Liter Roots are nice but I'm starting to think she might have some sort of rot going on, going to introduce Peroxide in the water to help her out No sexing yet, I'm assuming she's a female (hopefully) Did some small LST in order for the bottom line to grow a little bit
Likes
4
Share
Impressed with this plant. Only grew it under a cheap LED and it did really well. Harvested ~92G of prime bud plus an ounce of frosty trim which will be made into bubble hash. Will be interesting to see how much more it would yield under better lights. Nugs are dense, frosty and the hit from this strain is hard. Night time smoke. Will grow again. EDIT: As it cured, this just got better and better. Best weed I have grown, even better than the Wedding Gelato, which was incredible. Popped another seed straight away. Update after 12 days curing (See video): Gorilla gonna knock you out, son! Wow! This aint no friendly Disney Gorilla. This is a Dominant male Silverback with zero respect! These buds are dense and sticky after 12 days with a 62% humidipack in a Mason burping daily for the first week. Will def grow this again. Hardest hitting and as smooth as anything I've ever grown, too. Damn!
Likes
5
Share
@Naujas
Follow
28 days since her appearance:) she lives in nature, I visit her once a week:) she looks healthy :) this week there was rain and strong wind, but there were also very beautiful days with the sun :) so everything is going well :) good luck to everyone.
Likes
30
Share
@valiotoro
Follow
Hello everyone week 7 of flower has passed for this Skywalker haze auto 💥 She’s ready !! Green Sensation 0,5ml/L Mars hydro SP-6500 75% have a great day and wish you all happy growing 😎
Likes
3
Share
@Dairon
Follow
Cada vez me gusta más esta variedad, fácil de cultivar, muy ramificadas y acepta las podas muy bien, haciendo poda de bajos y poda apical, he conseguido, en algunas plantas no en todas, igualar las ramas en altura con facilidad. Ya están apareciendo los primeros pistilos en 2 de las plantas, aspecto muy a tener en cuenta a la hora de seleccionar una madre, como ya comente cloné las 9 plantas (2 clones x planta) y me quedaré con una madre si me termina convenciendo su calidad.
Likes
16
Share
The tallest, densest, frostiest in the tent but the smell is less pronounced.
Likes
178
Share
Hi Guys, This week has been pretty good, the plant at the bottom right just seems to struggle her way through everything, she has loads of roots, they keep growing but for what ever reason she look plain ugly and grows very slowly above the water which is evident when looking at the photo lapse I have uploaded. I bought a Torus PH Perfect capsule which is a chemical free way of stabilising the PH, since that has gone in the brain bucket, I haven’t had to make any PH amendments yet. You can see it at the end of the video. They have all been topped for the 3rd and final time around D32-33. I will train some tips down so they don’t become dominant, but other than that, they’re gonna have a free week or so of growth with no more slicing or cutting before I flip them😊 Hopefully the ugly one will have bounced back by then and I can push forward into the transition with 6 healthy bushes.
Likes
3
Share
Likes
1
Share
They have shown sex and seem to have grown multiple pistils from calyxes so I'm hoping there going to continue to flower. 🙏 Shot up in the last week and two smaller ones have now become two tallest. Trying to convert a branch on the tallest fastest growing middle plant using a home made STS solution!
Likes
25
Share
@DrGanj
Follow
Started flush now. I'm adding Nature Delight Active Sugar Boost as it's been recommended to boost terpene production. No idea if it will work this late into flower but trying anyway as apparently it has no need to be flushed and is fully organic.
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
5
Share
Defoliated a little bit, all 4 are different heights but I'm making it work.
Processing
Likes
6
Share
@Ashbash
Follow
Ok completely my bad with this. Haven't been feeling great the past couple weeks and have really neglected these babies, among other things. But, I had a go in there yesterday and hopefully things shouldn't keep getting so bad. The buds are fattening up on both a lot, and considering what they've been through I think they look pretty damn good. A lot of burned tops, any suggestions what o should do with them? Seems a bit harsh to smoke. I've managed to wiggle them down a bit lower, hopefully he burning shouldn't get worse, but we'll see. Smells fantastic anyway. Definitely want to run these again a. It further from the light 👍👍👍
Likes
34
Share
@Roberts
Follow
Blue Dream Auto has sprouted and looking good. Not a lot going on this soon. Everything is looking good. Thank you Seedsman, and Medic Grow. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 https://www.seedsman.com/?a_aid=Mrsour420. This is my affiliate link to seedsman. Thank you Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
16
Share
@Naujas
Follow
girl, from the beginning she was watered with water from the tap, the value of which is almost 350ppm. and a lot of lime, which prevents me from growing it bigger, but I'm happy with the result :) it's a small pot and only 50 w :) the flowers look very beautiful and sticky :) super ​
Likes
10
Share
Day 22 Veg Blueberry Muffin. They are growing fast. I topped them on day 19 below the 5th node leaving only the 3rd n 4th node. I also filled up the pots with more biobizz allmix and (rain) worm castings. 2nd topping will follow in a week or so, depending on the speed of growth. Day 24 Veg - explosive growth. Hopefully, the whole grow goes this smooth.
Likes
10
Share
@Budhunter
Follow
Day 97 of cycle Day 60 of flowering. I cut the full plant and hanged it and now gonna leave drying for 2/3 weeks. I prefer dry trimming because it’s easier.