Recommended
Likes
Comments
Share
This fifth week started off kinda rough. I had to remove some sick leaves that got hit by leaf miners. I’ve cleaned up all the damaged parts from the plants, including this one. On Monday, I’m gonna spray them with a ready-to-use mix that has Neem oil, nettle extract, and horsetail. I also noticed a slight nutrient deficiency, probably because until now I was only watering with untreated tap water — didn’t check the pH at all. Even when I fertilized, I still used water with no pH adjustment. I’ve only just started using pH-controlled water like two or three times now, since I finally bought a pH meter. Now I’m watering and fertilizing with everything adjusted to 6.5, so that’s something I need to keep in mind from now on. I’m planning to bump up the fertilizer to 1 ml per 500 ml of water. I’m using Biobizz Bloom, and I wanna keep the dose like that because the pot is small — just 3.2 liters — so I don’t wanna overdo it with 1 liter of water. I’ve noticed that 500 ml works just fine, so I’ll stick to that. Other than that, everything seems to be going okay.
Likes
2
Share
Likes
1
Share
Likes
19
Share
@Sadhus
Follow
– Eternity Grow Cup Zamnesia x Plagron - Semaine : Dernière semaine de floraison (F+9) Variété : Runtz (Zamnesia) Système : Hydro Ebb and Flow Nutrition : Plagron + Terra Aquatica (FinalPart + Green Sensation) Résumé de la semaine Cette dernière semaine de floraison a été dédiée à un rinçage optimisé pour finaliser le cycle de la Runtz de Zamnesia, une variété légendaire issue du croisement de Zkittlez et Gelato. Le système hydroponique Ebb and Flow s’est révélé ultra-efficace, permettant une absorption précise des nutriments et une gestion parfaite du climat, grâce à mon fidèle allié Trolmaster (clin d’œil à eux pour la gestion au poil du climat et des lumières !). Les cinq phénotypes cultivés ont montré une diversité incroyable en termes de structure, taille, couleurs et odeurs, rendant ce run visuellement et olfactivement spectaculaire. Voici les détails de cette semaine cruciale. Paramètres environnementaux Pour maintenir un VPD (Vapor Pressure Deficit) cible de 1,1 kPa, essentiel pour maximiser la production de trichomes tout en minimisant les risques de botrytis, j’ai ajusté les paramètres suivants : Température : 23-24 °C (jour) / 18-20 °C (nuit) Humidité relative : 45-50 % (optimale pour la fin de floraison, réduit les risques de moisissures tout en favorisant la résine) VPD : Maintenu à 1,1 kPa grâce à un contrôle précis via Trolmaster, qui a régulé l’humidificateur et l’extraction pour un équilibre parfait. Éclairage : PPFD (Photosynthetic Photon Flux Density) : 800-1000 µmol/m²/s, ajusté pour éviter le stress lumineux tout en maximisant la photosynthèse. DLI (Daily Light Integral) : 40-50 mol/m²/jour, atteint avec un cycle de 12h/12h sous LEDs full-spectrum, optimisé pour une fin de floraison explosive. Ces conditions ont été idéales pour pousser les plantes à produire des têtes denses et résineuses tout en gardant le botrytis à distance. Nutrition et Rinçage Pour cette dernière semaine, j’ai réduit l’EC de 2,45 mS/cm à 1,3 mS/cm pour amorcer un rinçage efficace, tout en évitant un choc trop violent pour les plantes. J’ai utilisé : Terra Aquatica FinalPart : Pour mobiliser les nutriments restants dans les plantes et optimiser la maturation des têtes. Plagron Green Sensation : Ajouté en faible dose pour booster la production de terpènes et de résine, tout en maintenant la qualité gustative. Le rinçage a été effectué avec une eau osmosée (EC initiale de 0,4 après ajout de Ca/Mg) et un pH ajusté à 5,5-6,0, parfaitement adapté au système hydroponique Ebb and Flow. Cette approche a permis de nettoyer les sels résiduels tout en préservant l’intégrité des trichomes et des arômes. Le système Ebb and Flow a brillé par sa capacité à fournir une irrigation homogène, assurant une fin de cycle sans stress pour les plantes. Observations des phénotypes Les cinq phénotypes de Runtz ont été un véritable festival pour les sens : Structure et taille : Certains phénotypes sont restés compacts (80-100 cm), idéaux pour l’indoor, tandis que d’autres ont atteint 130 cm avec une structure plus élancée. Couleurs : Des teintes vibrantes allant du vert vif aux nuances pourpres, avec des pistils orange flamboyants et une couche de trichomes givrés qui scintille sous les LEDs. Odeurs : La diversité terpénique est incroyable ! Selon les phénotypes, on passe d’arômes sucrés de melon et de fraise à des notes plus funky de fromage affiné ou même une touche surprenante de pieds (merci au caryophyllène et au limonène pour ce spectacle olfactif !). Les trichomes sont à leur apogée : environ 70 % laiteux, 20-25 % ambrés et encore 5-10 % transparents, signe que la récolte est imminente. L’observation au microscope révèle des têtes de trichomes bien gonflées, prêtes à offrir un maximum de puissance et de saveur. Les principaux terpènes identifiés (limonène, caryophyllène, linalool, humulène) confèrent à la Runtz son profil aromatique complexe : fruité, sucré, avec des touches terreuses et épicées, parfait pour une expérience sensorielle mémorable. Conclusion Ce run de Runtz pour l’Eternity Grow Cup Zamnesia x Plagron a été tout simplement exceptionnel. Les plantes sont magnifiques, avec des têtes denses, colorées et débordantes de résine. Tout s’est déroulé à merveille, du contrôle du climat (merci Trolmaster pour la précision chirurgicale !) à la gestion des nutriments avec Plagron et Terra Aquatica. La diversité des phénotypes a ajouté une dimension passionnante à ce projet, chaque plante étant une œuvre d’art à part entière. Un immense merci à Zamnesia et Plagron pour l’organisation de ce concours, qui a permis de mettre en lumière le potentiel de cette génétique incroyable et des produits de qualité. Vivement la récolte et le curing pour découvrir le plein potentiel de ces beautés ! 🌱🔥 #EternityGrowCup #Zamnesia #Plagron #Trolmaster
Likes
6
Share
Processing
Likes
20
Share
She's looking so beautiful,very nice strain to grow for sure,I'm trying to give her a good shape before flowering starts. I add organic liquids nuts only once a week and looks like she loves it,let's keep up the work!! 💚💛❤️🌱🤩
Likes
11
Share
@McShorty
Follow
Not much to say here, plants are growing nicely and overall look fine to me. i topped the bigger ones at the end of the week above the 4th node and the new branches are starting to develop. They get a little bit thirstier and drink more often and i think in the next week i'm going to put the small ones in bigger pots. So lets get into the next week :)
Likes
12
Share
@BloodBath
Follow
Plant starts off slower than others. But once she’s in flower and starts packing on resin and changing colors, everything changes. The plant reeks of funky terps and citrus and just stinky goodness. The colors are crazy ranging from pink to blue and purple. Highly recommend this strain and she produces super fat sticky buds. She’s a keeper.
Likes
14
Share
Stacks on stacks! The OG Kush has hit day 42 of flower and she's starting to bulk up. Still throwing plenty of pistils. Gave her a heavy defoliation to let those sugar leaves put in the work for those buds. Gave the Kush one last top dressing of castings, Gaia 284 and a splash of guano along with her weekly recharge watering. This cultivar has been very low maintenance since flip, whis is awesome when running multiple cultivars in multiple tents 😆
Likes
16
Share
This girl has definitely stopped stretching, so now almost all of the growth is going to be located at the buds. I plant to increase nutrient concentration, but also light intensity (this one by pulling the LEDs closer to the canopy). This week it will hang at 30 cm from the top of the canopy, maybe next I will push it further to 20 cm next week... By the way, the thunderstorms are over so now I can consistently keep the humidity around 45% with just the 3 cpu fans ;) I am experimenting with trying to clone some branches even after 5 weeks of flowering. It's just for the LoLs, and to learn a little bit. I took a lot of clones from the bottom of this plant before with great success during defoliation, so I decided to up the challenge. I know you shouldn't stress the plant too much during flower, but she seems healthy enough to take it without a problem. // on the nutes of this week// So this week I decided to up the nutes again to 1.0, as the lower leaves are showing deficiencies, and this time the EC of the runoff is low (plus I've been feeding only 0.8EC or 400ppm, which is much less than people generally feed at this stage), so I'm more confident that it's not a nutrient lock out. We will see how she likes it. Remember that my noob friendly approach is that keeping my plant on a diet is better than killing it by overfeeding it.
Likes
14
Share
Hey-O ! The girls are doing great, lots of frost development and thickening up. Big fat colas and nugs on these ones. Pretty sure the Mai cola is a solid OZ on its own 🤤 smelling very dank, and feeling greasy to the touch. All I have had to do this week is fill the humidifier and admire them as they grow 😎 not too much longer, hoping they finish around the same time as my other strain . Happy Gardening 🇨🇦👊❤️🌱
Likes
12
Share
This week I assembled the new 48x48x80 Mars Hydro tent and installed the new FOHSE Aries 600W LED light. I set the dim to 75%, but after two days, it was clearly too much, especially for 20 hours per day. I will dim it way down and shorten the hours until the plants appear to be doing better.
Likes
4
Share
Processing
Likes
8
Share
I think Zkittlez Auto has two weeks left, including this one. She definitely looks like the ten week pheno and I think she’ll bulk nicely in these last weeks. I loved growing this auto and am so impressed I was able to get these results considering I’m not an auto grower. I’ve already begun flushing and I think she’ll be a nice smooth smoke when she’s done. I’m amazed at how resinous she is. Looking forward to harvesting and then exploring more auto strains.
Likes
3
Share
ploughing on ahead this week , i have removed some lst ties from each plant . focusing on leaf tucking . Since we are now in flower. I did a little defoliation for the topped crinkle to remove bud sites that would not reach the canopy . otherwise these have not been stressed at all it seems , ive only leaf tucked and lst , more pics coming soon we are at full power - 200w . thinking of upgrading
Likes
12
Share
@Bncgrower
Follow
Another week is over, one of these girls is in the final stretch and very close to harvest, but Xingu and Volta ao Mundo are now showing signs of maturation, Moranguinho do Nordeste has some very dense, resinous and fragrant buds, and soon it will be time for ✂️, otherwise everything is as expected, I noticed some yellowing of some leaves in Xingu, but I believe it is because of the last few weeks. Thank you for following and happy growing! 🍁🌱🌱
Likes
19
Share
Why hello, if you are still here thank you for the love & support. I cant believe we are already on the start to week 3 of bloom! This lady here has been streching the last 2 weeks! During the first week of bloom I gave her nutrients with both bloom a & b as well with bud candy! Then water in betwen watering. Shes been needing watered everyday in this 10 Gallon pot! So im very careful with the nutrients and keeping a close eye on her! Ive also used dried coconut powder with irrarated, ph balanced water. To help the roots absorb the nutrients and really up take! Im beyond ready to see what week 3 brings us! Ive been behind on defoilation only taking about 3 to 5 leafs a day just to try to get other coals light! If you have any question feel free to ask! Much lovee lets go guava!!!
Likes
97
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 Everyone was up-potted 2 days ago and showing a little new growth since then. They're all very healthy looking, one has some slight yellowing which should disappear soon with our change but all plants are extremely small for their size.. we've been letting these dry out completely between watering so I'm convinced there's a genetic component to this. We've had a few other strains start extra slow for us in the past and one in particular that started slow and then took off like wildfire around week 5 so I'm not too concerned ..they're each using 3gal square (plastic) pots willed with fresh Promix-HP..they're getting a little bit of Big Bloom with smaller amounts of Grow Big with every other watering now and this has corrected the odd hue we noticed around wk3.. The Mars SP-3000 is about 2.5 away, it sounds far but despite the distance, node spacing is always really tight in that tent all through veg We're hoping for some explosive growth this week now that everyone is officially settled, we're still on the fence as to how we'll train these but odds are we'll do our typical 4 way LST after topping and keep under their skirts bare.. ..there no telling how long we'll veg these as size is always our determining factor but when the time comes, we plan to flower in this tent as well.. not too much else to report, its been an effortless week.. thanks as always for dropping by and happy harvests everyone!! 👊😺 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~ 8/17 We've gotten some fast growth in the last few days.. we figured they were just late to the party.. we topped all plants at the 3rd node yesterday and we'll eventually pull each plant 4 ways..apparently the "weird hue" is genetic, they all have a unique purple undertones..neat strain for sure.. we dropped the SP-3000 a few inches and they're praying to it almost around the clock..we're debating on building a 4x2 PVC scrog table for these girls if we find the time.. thanks for dropping by Growmies! Much love!❤️ ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_