1-9 Watered 3x, starting flush. 1-11 Day 67 from seed Day 43 of flower Boosted Scc and cal/mag Small shot ppm 550 ph 6.2 1-12 Started 3x flush. Ppm brought down to about 200. 1-14 Feed Scc ppm 550. Same as last feed. Leaves showing fading. .

Very happy with the results so far. Diligently doing nothing lol

My GG4 mother plant is doing better than I could have ever hoped for,I have never grown a plant this bushy in my entire life!!! She reeks of skunk and burnt rubber already at the end of week 1 of flower. I'm really hoping she finishes before I go on vacation october 9th 🙏🙏🙏🙏🙏🙏🙏🙏🙏 I have been moving my plants around with my new plant dolly and chasing the sun around my entire yard daily in hopes i get some bigger more dense buds😅 we shall see

Hi ... It's been a crazy week and it switched to 12/12 on the 40th day of vegetation.🍃🍃🍃 They are ready for sure there is no more to wait ... 🍃🍃🍃Good luck girls during the flowering stage🍃🍃🍃

Leider heute nicht so viel Zeit darum die kurz Fassung, nächsten Sonntag wird gelollipoppt, for Pflanzen sehen Mega aus und sind voll im Stretch. Ich bin super zufrieden und finde die Sorte echt Hammer, macht Spaß sie zu growen und ist sehr Anfängerfreundlich.

I felt things were going well, and didn't want to jinx it.... however my time has come for the next level of challenges. This week things were looking great, but then I saw some leaves having discolored spots. I looked under the microscope and saw it was the leaf, didn't think much more of it. Next day, more spots, so I investigated. looking again with the microscope, I found the devil! Spider mites! So, I sprayed greencleaner on them at light shutoff... and the following day plant does not look too good. Looks dry and light burned. So I moved the lights up, they were not a problem before and the plant had stopped stretching this week. hopefully I this will go away, but I need to spray tomorrow to keep with the schedule, hope it does not dry out y plants as much this time! However looking at the bugs again, they are dead! I also lollypopped the girls, however since I am a noob, I could have trimmed more, but it makes me nervous of taking off too much, so maybe a few days I will take some more off, or just watch the dead leaves closer, and will clear daily...

Is a low budget Indoor, with 50x50x1.40 cm made by me :P idem the leds, are COB 50w each one

Hi Growmies, She is becoming a monster. This plant is only 18 cm tall and basically consists of stems an buds, by now she has overtaken her mother in terms of bud production, quality and bud volume. I like to believe that the one feeding of pk 13/14 stimulated it even more. As of now the feeding will get less end less, preparing her for ripening. I am a super proud of this little project and it’s outcome and looking forward to cut this beauty down in roughly 3 weeks. Not much more to do but wait.

Week 1 Day 1 - 8/12/2023 1st Water change Day! Such a special time it is when you remove the little bit of Nutes that you gave them as an appetizer and you give them their first real meal. Added 39 Gallons of Water to my system SILICA= .5mil/Gal = 19.5 = 20mil Root Drip = 1mil/Gal = 39mil Cal Mag= .25mil/Gal = 9.75 = 10mil FLoraMicro= 3.0mil/Gal = 114mil FloraGro = 2.0mil/Gal = 78mil FloraBloom = 2.0mil/Gal =78mil ORCA= .5mil/Gal = 19.5 = 20mil Week 1 Day 2 - 8/13/2023 Everything is looking good the roots are making thier way to the water and the new grow is looking nice and green. Week 1 Day 3- 8/14/2023 Everything is right on track, they are looking beautiful and in the praying postition all leaves happily lifting towards the light. Week 1 Day 4- 8/15/2023 Looking beautiful today and looked like she could use her first haircut.. gave her a TOP off. Roots are laying in the water everything is looking right on track.. Week 1 Day 5- 8/16/2023 walked in and the humidity was under 60.... ohh noooooo.. So I added 2 humidifiers to the tent and attached them to my InkBird controller which is set to 62. She had roots nicely in the water.. this grow is on!!! Week 1 Day 6- 8/17/2023 Humidity was a little low this morning, so I refilled the humidifiers. Other than that, the temp looks great, the PH looks great, the PPM looks good the plant is in the praying position and all damage from the little drowning seems to have been fixed. Happy Happy. Week 1 Day 7- 8/18/2023 Yay.. week 1 in the books, roots in the water growth has started first hair cut given and both side nodes are growing. Everything is looking good and on track.. A lot better than week one of the last grow when I had them drowning week 1. Really excited on how this grow is going to come out.

Caterpillars and storms destroyed these buds, probably got an ounce of each plant. Let it dry for two weeks, froze and pressed flower rosin. Rosin has a very strong fruity flavor, gets me high for about an hour, cut too soon

They're getting fat! There are 3 skywalkerhaze completely full of hair and resin overflowing! I used atami's bloombooster! UV Light has been added for the last few weeks! Thanks

Just waiting for them to finish. 8 Apr - 2.2L each + B.A.C Final Solution (last watering before harvest) I'll probably harvest them early because I need to paint the room. Will give them one more week until the substrate dries out. 10 Apr - just waiting for the substrate to dry out before chopping down. Trichome productions is crazy. I hope they taste as good as they look.

⚗️ FERMAKOR – Neutralisation & Filtering (Final Stage) 🧠 “From reactor to bottle — the first real batch.” --- 13.10.25 — Pulled about 1L of the finished FERMAKOR extract into a 5L bucket and added roughly 2L of clean water. Let it sit for a bit to calm down and cool off before touching the pH. Sample came back around pH 6.8–7, totally non-caustic — exactly what I wanted before acidifying for storage. Started adding phosphoric acid (59%) slow and steady, stirring between each pour. Ended up using about 50ml total before the colour flipped red on the GHE drops, landing the mix right around pH 3–3.5. No foam, no violent reaction, just smooth. Smell turned clean and metallic-sweet — the kind of smell that tells you it’s done reacting. --- Filtering setup Used a pillowcase and cheesecloth layered together as the filter stack. The pillowcase handled all the heavy junk, the cheesecloth grabbed the fine silt. It came out thick, dark amber, glossy — zero grit. I’ll leave it to rest overnight, open, just to let any tiny bubbles or gases clear out before bottling. --- Final note This batch is officially FERMAKOR B Concentrate V1.0 (1:4). Storage pH locked between 3.3–3.8, ready to bottle and shake before use. This one’s rich in P, K, Mg, and micros, while Calcium Nitrate will handle the N and Ca on the A-part side. --- 🌱 Closing the diary That’s it for this round — extraction phase complete. I’ll be closing this diary here and opening a new one called “FERMAKOR A+B Test Grow – V1.” Testing starts Monday, 20.10.2025 on a single plant. Time to see if this brew actually works in the tent. 📸 All images videos to be added later — filter setup, pH colour, and final concentrate.

The stretch has started. Very manageable since they started flower on the shorter side. Some adjustment to feeding and a good leaf striping mid week. Pheno number 1 has broad leaves and a very tight node spacing compared to the other four. Number 3 has shown to be very vigorous in growth and cloning. Number 2 is the runt and slow but stinks. The others are very similar. The girls got fed after the leaf strip the next day they looked really happy.

My gas tax plant is looking absolutely incredible right now. It's got these massive buds that are super dense and have this awesome dark color to the leaves. I'm so excited to see how it turns out when it's finally ready to be harvested. I've been checking the height, the thickness of the stem, and the density of the buds to get an idea of how much longer I have to wait. I think I might start flushing it soon. The past few weeks have been so beautiful, watching the plants grow and change. It's amazing how something so small and fragile can turn into something so strong and vibrant. Now that they're getting ready to bloom, it feels a little bittersweet. I'm so excited to see the finished product, but I'll definitely miss having them around while they're growing.

Late flowering smels is awesome like sweet and spiecy both on melane aroma tricome heads are coloured and ready to harvest

Este seguimiento es posible gracias a la colaboracion de Anesia Seeds, MarshHydro y 420DeepGrow. 💡El Mars Hydro TS 3000 es lámpara de cultivo LED más grande de la serie TS, ofrece suficiente cobertura para un área de 4 × 4 pies con un precio asequible y rendimientos de calidad; a cambio, puede aplicarse tanto al cultivo doméstico como al cultivo comercial. Puedes comprarlo aqui: https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ La Vanilla Frosting es la más destacada de todas las variedades de Gelato 🍦 de los últimos años y tiene un crecimiento extraordinariamente fuerte y resistente 💪. Las flores se vuelven densas y brillan 💎plateadas debido a su gruesa capa de resina. Algunos fenotipos adquieren un hermoso brillo púrpura durante la floración. El aroma de Vanilla Frosting es abrumadoramente delicioso y tiene una clara nota de vainilla con aromas dulces que recuerdan a los caramelos. No querrás dejar de fumarla. Sin embargo, debes tener cuidado porque esta cepa es muy potente y puede catapultarte fácilmente a un viaje de aventura al espacio. No podrás volver de esto pronto. Las plantas de esta variedad forman flores largas, grandes y pesadas que se ahogan en resina y brillan como cristales de hielo. Al increíblemente dulce y delicioso sabor a vainilla le sigue un subidón de combustible, impulsado, entre otras cosas, por un estimulante contenido de THC de hasta el 29%. Consigue aquí tus semillas 🌻🚀: https://anesiaseeds.com/es/product/vanilla-frosting/ 📆 Semana 8: Continuamos con la etapa de engorde, esto va que vuela 😍, la resina esta muy presente ❄️ , el cogollo central es impresionante Esta semana seguira el TS-3000 de MarshHydro al 100% y 30cm de distancia. Se estan desarrollando mejor que nunca, con una floracion mucho mas rapida, noto una gran mejoria gracias al Marshydro TS-3000. Se que va bien de nutrientes, ya aclarando Continuo con defoliaciones Aplico una solución con nutrientes EC 1500 y otra con agua del grifo reposada y PH 6.6