Likes
Comments
Share
@Radagast_
Follow
29.06. Wedding Cake 1# Day 65 This plant is one of the few plants least affected by the problem, but it is certainly missing 30% of its leaf mass. She has finally continued to grow and I hope she pulls through. Wedding Cake 2# Day 59 This one is forever hungry and thirsty... 29.06. The plants have finally started growing again, some have almost completely recovered, some are still recovering, and some are in critical condition. The plants stopped growing for almost a week, maybe even that long, during those days they literally made no progress, the situation only worsened to the extent that I was sure that all but one plant would wither... There were storms yesterday and the day before yesterday, and that's why I'm late with the update because I couldn't take a picture of them, the gusts of wind were really strong. Watering is now more frequent and abundant, now I water them every 3rd or 4th day, everything depends on the temperature on those days, whether there is wind, how much moisture there is, etc. The last time they were watered was before the storm and they are already thirsty today as you can see in the pictures, it will be a day and I will water them in the morning. Today I removed their leaves again and now I can freely say that they have twice as few leaves as they should, so when it's time for defoliation, I probably won't do it at all, or at least not a lot. The day before yesterday it was the end of the ninth week for the plants, now they are already in the tenth, but in order not to miss the ninth week, I will write it in the ninth and I will write the next update 2 days earlier, more precisely, on time. The day before yesterday it also rained, there was a downpour for about 40 minutes, but the spray that I sprayed on the plants failed to absorb, it simply stuck to the leaf, it is greasy, you can see that in the pictures, the leaves are shining. I think the biggest problem was caused by the fact that it sticks to the leaf and when the sun is strong, the leaf simply burns. In general, do not use the product from the last picture, it can easily kill the plants. Most of the plants have almost recovered and are getting better, however, the rain can't stop that shit and I also tried to wash it, but it's not worth it, so there is a high probability that the problem will return when the temperatures rise again and the UV is almost extreme and that could be a problem... the temperatures have normalized again to 30 during the day, but in 4-5 days they are announcing again around 36-7.. I will copy the problem that befell the plants from the previous two diaries of other strains from a few days ago in order not to explain everything again, so whoever is interested should read it in more detail. 25.06. the condition is medium sad... the plants have not progressed at all, why? Well, because I'm a moron who doesn't think... Basically, what happened.. I sprayed the plants with an organic preparation against thrips and similar pests and if there was no need for it because this is growing outside and absolutely these little things can't do anything for them except something miserable to slow down their growth, but nothing terrible... and now, I didn't even want it to slow them down miserably, so I ordered a product called "SMC Spidermite Control" I sprayed the plants overnight, the next day when I came to the site, I had something to see... which is the worst I sprayed all the plants, instead of checking on one and only then spraying the others...autos I wanted to spray all the same, luckily I only sprayed 5 of them, as if God himself told me "wait until tomorrow to see how the plants will react" and continue...I come to the site and I have something to see...all the plants, but all, some more, some less, but the leaves were massacred blue, black, purple, there were all colors, everything was there, but the least healthy leaves, as if I had sprayed them with the biggest poison, I think that even in that case they would have passed better... was it the product itself or the sun that was strong during the day (I sprayed them at night and the nights were around 18 C in the coldest part of the night, so they had time to dry, it's not that they couldn't dry, but it all stuck to sheets, it was all shining, I think they could see how bright it was from the plane, but literally... I removed almost 50% of the leaf mass from some plants, from some smaller ones... the tips that were supposed to grow and be ready for a new topping just started, so they had stopped completely for a couple of days literally... the situation is now as you can see in the pictures, there are a few leaves that appeared after spraying with that product, and it is still appearing, but very little, just, just, and this there was no point in leaving the leaves that I plucked because they were completely destroyed, I have never seen them in my life... The site I bought it on said that the preparation was organic and completely safe, nowhere did it say that it can literally kill the plants, not even on the preparation itself... I am very sad about this, I have been spraying them with clean water every morning before sunrise since it appeared and the tops have slowly started to grow, this crap is appearing less and less, and I have no more leaves where should I remove it, I would just kill the plants... I hope they will recover (except for one plant that is in a critical condition and the automatics that were sprayed are also in a very critical condition, they are young and will hardly survive this) but if not, I have another white runtz that is not in the diary, it is a little more than 3 weeks old, so I will transplant it into 200 liters of soil, so at least something will come out... I feel very sorry for the plants, I already have enough money invested, and this is also my therapy, cultivation heals me… I'm very angry with the people who sold it to me, and they didn't warn me about such a thing, if it's not written on the bottle itself and on the website, and I've been buying from them for years and they know what I'm growing... the product is not cheap, I paid money for something that will kill my plants, fuck... I mean, fuck money, I feel sorry for the plants, but you understand what I'm saying... I'm also angry at those who put the product on the market in the first place, and I would say all kinds of things I did it, but it's better to keep quiet... and mostly I'm angry with myself because I believed what it says and didn't check the product, like the biggest amateur... But what's here is now, let's move on... Today is the 57th day of the plant's life, yesterday was the end of the eighth week. Watering is now more frequent, every 3-4 days, it depends, the heat is already high, today it was at least 40 C in the shade, the forecast says 35. Since the last update, the plants were fed once and for the first time after transplanting, this morning most of them were fed for the second time, the next watering or two will be with clean water. Stay High and Keep Growing!!! Growers, please avoid this crap, the product is called " SMC Spidermite Control" This crap seems to have been imported from Ukraine,from chernobyl directly, not from UK lol Only Positive Vibes Stay High and Keep Growing!!!
Likes
4
Share
@B4niTa
Follow
Permanent Jealousy XL Auto sprouted and looks healthy😁 Kept it under 20/4 light
Likes
13
Share
@J_diaz420
Follow
Solamente defoliación mientras las veo crecer en su prefloracion.
Likes
34
Share
@Njanne
Follow
This lady is so tall and her colas are getting too heavy. We had a bit of rain and wind mid-week and she could hardly stay up... one cola actually broke off! I'm trying to get another two weeks out of her. Fingers are crossed. It's a blustery day today and I'm a bit nervous! She's not ripe yet... I don't want a 'preemie' on my hands.
Likes
411
Share
This grow with the TSW2000, FC4800 and 8x8 Grow Tent has come to an end🤘🤘. I'm so happy with the results mars hydro has done👍. Best lights you can get in my opinion and TONS of other people agree with me on this too👍. I always say mars hydro gets em frosty and their lights DID get em nice and frosty and the buds are so tasty and smell awesome🤘. Not a huge haul per plant but I'm still very happy with it because the quality is amazing. I will never want to use anything but MARS HYDRO. Extremely satisfied with the entire grow with mars. The weed quality is very good and controlling the heat was simple because they don't get that hot. The lights were very easy to setup and so was the tent. I STONGLY recommend any products from Mars Hydro. You will not be disappointed 👍 Thanks for following my grow and good luck to all my friends and remember to have fun with your grows🤘🤘 rock n roll a joint everyone🤘🥁🎸 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress2 Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my shit🤜🤛 GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
31
Share
Hi guys after 10 day that the twins popped up i can tell they are growing strong!! My twins growing better than other Crystal Candy who i have. We will see what's happen this week and in the end off the week i will up date my diary. I notice one of twins cover up the other one and so i have decide to tie this. From friday i will introcuce sensi grow a+b because I think the nutrients inside the soil will be finished. For you the twins are growing good? Look at the video guys! (sorry for my english😬) DAY 14 My twins grow vey hard and in the same way. I start wirh sensi grow a+b with ec 0,8 and they appreciated. We will see the next week the height for start the bloom phase. Happy growing for all 🙏 GGG
Processing
Likes
18
Share
11/30: I harvested the first 6 today, flushed 5 more for the second time, and fed everybody else for the last time. I washed all the branches using the 4-step method ascribed by Doc Bud at High Times/420magazine and many other notable cannabis connoisseurs, with slight modifications: 4 x big plastic totes/bins 8 x ounces of 12% hydrogen peroxide (or 32 ounces of 3%) 2 x cups of concentrated lemon juice 2 x cups of baking soda 10 x gallons of water in each bin Unless your tap water stinks, you're safe to use tap water for the procedure, but I used an inline carbon hose filter to fill my buckets. Bin #1 - 10 gallons of water mixed with the hydrogen peroxide Bin #2 - 10 gallons of water mixed with the lemon juice and baking soda Bin #3 - 10 gallons of water as hot tap water Bin #4 - 10 gallons of cold tap water I was mainly concerned about removing as much lint and cat/dog hair as possible, but also rinsing off any residue left from all the various foliar applications of humic/fulvic acid, kelp, axiom, big bloom, and tiger bloom I did. First, I put my leaf blower on low speed and blasted my plants thoroughly, one at a time, replicating 50-60mph winds for about 10 seconds and watched as a whirlwind of debris and hair flew out the back door. Bud-washing: Pluck any necrotic plant material and any old fan leaves off while they're still on the plant. Then, take a handful of branches and submerge them in Bin #1 for about 30 seconds, agitating it, removing from water, submerging again, agitating, etc...then remove it and let it drip out for a few seconds...then repeat the process with Bins #2-4. Let it drip dry overnight with a little bit of airflow, then dry as you normally would...baskets, boxes, etc.. I hadn't watered these plants in a few days, so they were almost in draught, but after doing this procedure, they were fully hydrated(turgid) and seemed to have brighter colors than before. Nice!😍 12/1: The bottom part of the closet seems empty with only 9 plants in there.. 😟 I cut the harvested plants up and put them into drying baskets in the top of my closet with a small oscillating fan on. I've got the temperature fluctuating between 68f and 75f and the RH is staying between 48% and 52%. To do that, I had to take down the small light in the top of the closet to fit the drying baskets up there. So, I moved the 3 shorter plants still up there down to the bottom and put them on top of buckets. Now the bottom of the closet looks full again!😃 I'm anxious to finish up this grow so I can get busy growing the Fastbuds Fast Flowering Photo Testers!!! When I harvest the next 5, I'll flush the remaining plants really well and that will be all the flushing they'll get..I'll let them dry back out for a few days and harvest them. I've got to make some minor improvements to the garden (adding UV, blue and red/far red booster panels and intake fans) That should put me on track to start germinating them by mid-December if all goes well. 12/3: ...early a.m... The harvested plants are already dry!?!?? And have excellent texture??? Wow..bud washing is for real..roughly 48 hours after I hung them to drip dry, and 40 hours after I put them in baskets in 50% RH/70f conditions with moderate airflow...usually takes 4 or 5 days to get a good slow-dry in the same conditions, so I'm convinced that this must be attributed to the bud-washing procedure. I'm sold! Here's the talley so far: plant #1 - 115g (plus 13g larf) - Candy Cane [F2] plant #2 - 108g (plus 18g larf) - Candy Cane [F2] plant #3 - 119g (plus 15g larf) - C4ndycaine [Candy Cane x C4] plant #4 -  92g (plus 6g larf) - Candy Cane [F2] - the smallest plant in the main area plant #5 - 112g (plus 22g larf) - Candesia [Candy Cane x Amnesia] plant #6 -  75g (no larf) - Candesia [Candy Cane x Amnesia] - grown in upper area under 200w ...afternoon: I flushed 6 of the last 7 plants for the first time today and harvested 4 more of them. I washed them and hung them to dry.....my dripping wet bathing beauties!😍
Likes
27
Share
Habe sie diese woche in ein scrog netz eingeflochten, sie kommen sehr schön
Likes
17
Share
@Chevywood
Follow
Could anyone estimate when they will be done .
Likes
35
Share
@Eryan
Follow
Day 15 - Watered again today. Plant grew quite a decent amount and the stem has finally begun to thicken. Will need a bigger humidifier for sure, and then one that can automatically keep humidity at a certain % Day 16 - Growth is definitely starting to take off. Stem is finally getting thick enough to where LST seemed to be a good idea to start. Smell is getting stronger, but still can only be sensed when holding the plant to your face. Will probably need to plant into the final container in a week. Going to also add another light (105 W) by the end of the week. Day 18 - Watered, got new humidifier. Just using that for now in the whole room, since it gets too dry in here anyways with the heating. Day 19 - Transplanted to what should be the final container today. Was a good time to transplant too, the roots were beginning to bunch up at the bottom of the previous container. Using Atami Bio-Growmix as the soil now. Accidentally damaged one leaf during the transplant. Stopped with LST for today to let the plant recover a bit from the transplant. Then will resume it tomorrow. Might be trying out SCROG...but first will read more about it. Also thinking of FIMing soon...but also going to read a little more and let the plant recover more from the transplant first. Have another lamp now, the 105W. However, didn't realize that it has a low kelvin value. So getting a couple of new higher kelvin lamps soon. Will just use the 105W in combination with a 125W during flowering. Smell is increasing, but not noticeable outside the tent. Day 20 - FIMmed today. Not sure if it was a great idea, the part taken off seemed to have possible beginnings of flowers inside. Not certain though, so yeah...will see what happens 😅. The third set of fan leaves turns out to be 7 leafed, so she went straight from 3 leafed for the second set to the 7 leafed. Is that a good thing...? Also resumed LST. Day 21 - Seems like the plant might be recovering from the FIMing. Temperatures got way too low last night though, at 60 degrees. Since two 125W lamps (5500K) are being used now, the temperatures are getting a bit warmer, from 78 to 80 degrees. So it's important that the night temperatures don't get that low again. Was thinking of eventually doing three 125W lamps with the 105W for blooming phase, but that will probably be too warm even with an extraction fan (the 105W, being older, produces more heat than the 125W). Not yet sure what will end up being done for the blooming phase lighting. Tomorrow is week four...flowers will probably start appearing soon by the end of the week. Hope it's been able to fully recover from FIMing by then.
Likes
37
Share
The cherry bomb has done well in expanding her growth after topping. I am having a ph problem again, and had to move the tent due to really cold weather. She is starting to show signs of nute burn. I have cleaned out the DWC bucket, and I am flusing her for a few days. I have put this plant through a lot of stress, and she continues to bounce back. I am very pleased with this plants Resilience.
Likes
4
Share
Welcome to Flower Week 1 of Divine Seeds Auto Black Op1um I'm excited to share my grow journey with you all as part of the Divine Seeds Autoflowering Competition 2025. It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this competition, I’ve chosen the Feminized Automatic strain: Black Op1um Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Divine Seeds • 💧 Humidity Range: 50 • ⏳ Flowering Time: 8W-10W • Strain Info: 21-23%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 0.5l • Nutrient Brand: Narcos • ⚡ Lights : 200W x 2 A huge thank you to Divine Seeds for allowing me to be a part of this amazing competition and Sponsoring the Strains. Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!
Likes
17
Share
@Gordy
Follow
Beginning of week 10(Bloom): Not much to mention this week. The fade is starting to show more. Really looking forward to harvesting this. Doing my research now on what I need to do for a successful harvest. Added in a family photo😀
Likes
2
Share
@Bluemels
Follow
Tag 72: Die letzte Düngewoche hat begonnen, die Blätter der beiden Pflanzen sehen echt fies aus. Die Blüten gehen aber.
Likes
3
Share
Likes
26
Share
So guys today is day 49 entering week 8, so 1 more week on the bio bizz heaven, top max and bloom. The weather in the UK is mad at the minute 28°c my grow room is the same with lights off and causing my a lot of humidity, thank god for the dehumidifier but I'm emptying it twice a day now. Buds are getting fatter and the fade is coming on. Just got to go in there and check on them, temp has dropped now even tho light is on. Humidity is sitting at 50%. I hope you like the video, happy growing peoples😊💚 ignore the ozzie man review voice at the beginning 🤣🤣🤣 Day 52 flower, buds are fat sticky and ready to harvest, im waiting for more of a fade as I reckon they will swell more, I think another week and its time for the chop. Any questions or advice please feel free to hit me up. Day 54, done a slight defoliation at there was a lot of leaf on leaf, I should of used cropguard for piece of mind 😅 next run I will trust me. I have started the ripener 5ml to a litre I will be running this for the next 7-10 days and then rinsing with there rinse aid for 4 days so aiming for harvest on the 24th-25th latest 😀. Happy growing famalam 💚
Processing
Likes
4
Share
My o my, what can I say... These ladies are gorgeous! Along with adding in the 2000W along side my 600W, I cut out the grow solution in my nutes contrary to the instructions and my ladies are booming! We'll see how the rest of the week continues! I started a majority bloom with some added glucose for my feed to help with bud weight but they are really packing on. Hopefully next week will be my last week of feeding as trichrome production increases and I can start my 2 week flush!
Likes
5
Share
@Mrg7667
Follow
Final week! I am starting the flush process at week 8 so going to do quarter nuts for 2days then half then 1/3 and then finish with 2-3 days water Tricombs where about 75% milk rest where clear maybe a few random turning amber She really must have put on weigh this last week because she is sagging hard now!