Yellow butterfly came to see me the other day; that was nice. Starting to show signs of stress on the odd leaf, localized isolated blips, blemishes, who said growing up was going to be easy! Smaller leaves have less surface area for stomata to occupy, so the stomata are packed more densely to maintain adequate gas exchange. Smaller leaves might have higher stomatal density to compensate for their smaller size, potentially maximizing carbon uptake and minimizing water loss. Environmental conditions like light intensity and water availability can influence stomatal density, and these factors can affect leaf size as well. Leaf development involves cell division and expansion, and stomatal differentiation is sensitive to these processes. In essence, the smaller leaf size can lead to a higher stomatal density due to the constraints of available space and the need to optimize gas exchange for photosynthesis and transpiration. In the long term, UV-B radiation can lead to more complex changes in stomatal morphology, including effects on both stomatal density and size, potentially impacting carbon sequestration and water use. In essence, UV-B can be a double-edged sword for stomata: It can induce stomatal closure and potentially reduce stomatal size, but it may also trigger an increase in stomatal density as a compensatory mechanism. It is generally more efficient for gas exchange to have smaller leaves with a higher stomatal density, rather than large leaves with lower stomatal density. This is because smaller stomata can facilitate faster gas exchange due to shorter diffusion pathways, even though they may have the same total pore area as fewer, larger stomata. Leaf size tends to decrease in colder climates to reduce heat loss, while larger leaves are more common in warmer, humid environments. Plants in arid regions often develop smaller leaves with a thicker cuticle and/or hairs to minimize water loss through transpiration. Conversely, plants in wet environments may have larger leaves and drip tips to facilitate water runoff. Leaf size and shape can vary based on light availability. For example, leaves in shaded areas may be larger and thinner to maximize light absorption. Leaf mass per area (LMA) can be higher in stressful environments with limited nutrients, indicating a greater investment in structural components for protection and critical resource conservation. Wind speed, humidity, and soil conditions can also influence leaf morphology, leading to variations in leaf shape, size, and surface characteristics. Small leaves: Reduce water loss in arid or cold climates. Environmental conditions significantly affect gene expression in plants. Plants are sessile organisms, meaning they cannot move to escape unfavorable conditions, so they rely on gene expression to adapt to their surroundings. Environmental factors like light, temperature, water, and nutrient availability can trigger changes in gene expression, allowing plants to respond to and survive in diverse environments. Depending on the environment a young seedling encounters, the developmental program following seed germination could be skotomorphogenesis in the dark or photomorphogenesis in the light. Light signals are interpreted by a repertoire of photoreceptors followed by sophisticated gene expression networks, eventually resulting in developmental changes. The expression and functions of photoreceptors and key signaling molecules are highly coordinated and regulated at multiple levels of the central dogma in molecular biology. Light activates gene expression through the actions of positive transcriptional regulators and the relaxation of chromatin by histone acetylation. Small regulatory RNAs help attenuate the expression of light-responsive genes. Alternative splicing, protein phosphorylation/dephosphorylation, the formation of diverse transcriptional complexes, and selective protein degradation all contribute to proteome diversity and change the functions of individual proteins. Photomorphogenesis, the light-driven developmental changes in plants, significantly impacts gene expression. It involves a cascade of events where light signals, perceived by photoreceptors, trigger changes in gene expression patterns, ultimately leading to the development of a plant in response to its light environment. Genes are expressed, not dictated! While having the potential to encode proteins, genes are not automatically and constantly active. Instead, their expression (the process of turning them into proteins) is carefully regulated by the cell, responding to internal and external signals. This means that genes can be "turned on" or "turned off," and the level of expression can be adjusted, depending on the cell's needs and the surrounding environment. In plants, genes are not simply "on" or "off" but rather their expression is carefully regulated based on various factors, including the cell type, developmental stage, and environmental conditions. This means that while all cells in a plant contain the same genetic information (the same genes), different cells will express different subsets of those genes at different times. This regulation is crucial for the proper functioning and development of the plant. When a green plant is exposed to red light, much of the red light is absorbed, but some is also reflected back. The reflected red light, along with any blue light reflected from other parts of the plant, can be perceived by our eyes as purple. Carotenoids absorb light in blue-green region of the visible spectrum, complementing chlorophyll's absorption in the red region. They safeguard the photosynthetic machinery from excessive light by activating singlet oxygen, an oxidant formed during photosynthesis. Carotenoids also quench triplet chlorophyll, which can negatively affect photosynthesis, and scavenge reactive oxygen species (ROS) that can damage cellular proteins. Additionally, carotenoid derivatives signal plant development and responses to environmental cues. They serve as precursors for the biosynthesis of phytohormones such as abscisic acid () and strigolactones (SLs). These pigments are responsible for the orange, red, and yellow hues of fruits and vegetables, while acting as free scavengers to protect plants during photosynthesis. Singlet oxygen (¹O₂) is an electronically excited state of molecular oxygen (O₂). Singlet oxygen is produced as a byproduct during photosynthesis, primarily within the photosystem II (PSII) reaction center and light-harvesting antenna complex. This occurs when excess energy from excited chlorophyll molecules is transferred to molecular oxygen. While singlet oxygen can cause oxidative damage, plants have mechanisms to manage its production and mitigate its harmful effects. Singlet oxygen (¹O₂) is considered a reactive oxygen species (ROS). It's a form of oxygen with higher energy and reactivity compared to the more common triplet oxygen found in its ground state. Singlet oxygen is generated both in biological systems, such as during photosynthesis in plants, and in cellular processes, and through chemical and photochemical reactions. While singlet oxygen is a ROS, it's important to note that it differs from other ROS like superoxide (O₂⁻), hydrogen peroxide (H₂O₂), and hydroxyl radicals (OH) in its formation, reactivity, and specific biological roles. Non-photochemical quenching (NPQ) protects plants from damage caused by reactive oxygen species (ROS) by dissipating excess light energy as heat. This process reduces the overexcitation of photosynthetic pigments, which can lead to the production of ROS, thus mitigating the potential for photodamage. Zeaxanthin, a carotenoid pigment, plays a crucial role in photoprotection in plants by both enhancing non-photochemical quenching (NPQ) and scavenging reactive oxygen species (ROS). In high-light conditions, zeaxanthin is synthesized from violaxanthin through the xanthophyll cycle, and this zeaxanthin then facilitates heat dissipation of excess light energy (NPQ) and quenches harmful ROS. The Issue of Singlet Oxygen!! ROS Formation: Blue light, with its higher energy photons, can promote the formation of reactive oxygen species (ROS), including singlet oxygen, within the plant. Potential Damage: High levels of ROS can damage cellular components, including proteins, lipids, and DNA, potentially impacting plant health and productivity. Balancing Act: A balanced spectrum of light, including both blue and red light, is crucial for mitigating the harmful effects of excessive blue light and promoting optimal plant growth and stress tolerance. The Importance of Red Light: Red light (especially far-red) can help to mitigate the negative effects of excessive blue light by: Balancing the Photoreceptor Response: Red light can influence the activity of photoreceptors like phytochrome, which are involved in regulating plant responses to different light wavelengths. Enhancing Antioxidant Production: Red and blue light can stimulate the production of antioxidants, which help to neutralize ROS and protect the plant from oxidative damage. Optimizing Photosynthesis: Red light is efficiently used in photosynthesis, and its combination with blue light can lead to increased photosynthetic efficiency and biomass production. In controlled environments like greenhouses and vertical farms, optimizing the ratio of blue and red light is a key strategy for promoting healthy plant growth and yield. Understanding the interplay between blue light signaling, ROS production, and antioxidant defense mechanisms can inform breeding programs and biotechnological interventions aimed at improving plant stress resistance. In summary, while blue light is essential for plant development and photosynthesis, it's crucial to balance it with other light wavelengths, particularly red light, to prevent excessive ROS formation and promote overall plant health. Oxidative damage in plants occurs when there's an imbalance between the production of reactive oxygen species (ROS) and the plant's ability to neutralize them, leading to cellular damage. This imbalance, known as oxidative stress, can result from various environmental stressors, affecting plant growth, development, and overall productivity. Causes of Oxidative Damage: Abiotic stresses: These include extreme temperatures (heat and cold), drought, salinity, heavy metal toxicity, and excessive light. Biotic stresses: Pathogen attacks and insect infestations can also trigger oxidative stress. Metabolic processes: Normal cellular activities, particularly in chloroplasts, mitochondria, and peroxisomes, can generate ROS as byproducts. Certain chlorophyll biosynthesis intermediates can produce singlet oxygen (1O2), a potent ROS, leading to oxidative damage. ROS can damage lipids (lipid peroxidation), proteins, carbohydrates, and nucleic acids (DNA). Oxidative stress can compromise the integrity of cell membranes, affecting their function and permeability. Oxidative damage can interfere with essential cellular functions, including photosynthesis, respiration, and signal transduction. In severe cases, oxidative stress can trigger programmed cell death (apoptosis). Oxidative damage can lead to stunted growth, reduced biomass, and lower crop yields. Plants have evolved intricate antioxidant defense systems to counteract oxidative stress. These include: Enzymes like superoxide dismutase (SOD), catalase (CAT), and various peroxidases scavenge ROS and neutralize their damaging effects. Antioxidant molecules like glutathione, ascorbic acid (vitamin C), C60 fullerene, and carotenoids directly neutralize ROS. Developing plant varieties with gene expression focused on enhanced antioxidant capacity and stress tolerance is crucial. Optimizing irrigation, fertilization, and other management practices can help minimize stress and oxidative damage. Applying antioxidant compounds or elicitors can help plants cope with oxidative stress. Introducing genes for enhanced antioxidant enzymes or stress-related proteins over generations. Phytohormones, also known as plant hormones, are a group of naturally occurring organic compounds that regulate plant growth, development, and various physiological processes. The five major classes of phytohormones are: auxins, gibberellins, cytokinins, ethylene, and abscisic acid. In addition to these, other phytohormones like brassinosteroids, jasmonates, and salicylates also play significant roles. Here's a breakdown of the key phytohormones: Auxins: Primarily involved in cell elongation, root initiation, and apical dominance. Gibberellins: Promote stem elongation, seed germination, and flowering. Cytokinins: Stimulate cell division and differentiation, and delay leaf senescence. Ethylene: Regulates fruit ripening, leaf abscission, and senescence. Abscisic acid (ABA): Plays a role in seed dormancy, stomatal closure, and stress responses. Brassinosteroids: Involved in cell elongation, division, and stress responses. Jasmonates: Regulate plant defense against pathogens and herbivores, as well as other processes. Salicylic acid: Plays a role in plant defense against pathogens. 1. Red and Far-Red Light (Phytochromes): Red light: Primarily activates the phytochrome system, converting it to its active form (Pfr), which promotes processes like stem elongation and flowering. Far-red light: Inhibits the phytochrome system by converting the active Pfr form back to the inactive Pr form. This can trigger shade avoidance responses and inhibit germination. Phytohormones: Red and far-red light regulate phytohormones like auxin and gibberellins, which are involved in stem elongation and other growth processes. 2. Blue Light (Cryptochromes and Phototropins): Blue light: Activates cryptochromes and phototropins, which are involved in various processes like stomatal opening, seedling de-etiolation, and phototropism (growth towards light). Phytohormones: Blue light affects auxin levels, influencing stem growth, and also impacts other phytohormones involved in these processes. Example: Blue light can promote vegetative growth and can interact with red light to promote flowering. 3. UV-B Light (UV-B Receptors): UV-B light: Perceived by UVR8 receptors, it can affect plant growth and development and has roles in stress responses, like UV protection. Phytohormones: UV-B light can influence phytohormones involved in stress responses, potentially affecting growth and development. 4. Other Colors: Green light: Plants are generally less sensitive to green light, as chlorophyll reflects it. Other wavelengths: While less studied, other wavelengths can also influence plant growth and development through interactions with different photoreceptors and phytohormones. Key Points: Cross-Signaling: Plants often experience a mix of light wavelengths, leading to complex interactions between different photoreceptors and phytohormones. Species Variability: The precise effects of light color on phytohormones can vary between different plant species. Hormonal Interactions: Phytohormones don't act in isolation; their interactions and interplay with other phytohormones and environmental signals are critical for plant responses. The spectral ratio of light (the composition of different colors of light) significantly influences a plant's hormonal balance. Different wavelengths of light are perceived by specific photoreceptors in plants, which in turn regulate the production and activity of various plant hormones (phytohormones). These hormones then control a wide range of developmental processes.

switched my light cycle and excited to see things take off Hoping to keep things under control Only budding 3 of the plants while the other one is still Vegging in another tent. Probably toss it in next week I tie them down constantly LSD is beautiful Green Gelato has grown wild Royal Gorilla is very bushy Hulk Berry has long strong Branches with minimal side branching...That is why I am vegging it longer March 9th Everything is going awesome at the end of week 1 of flowering -All plants are in 4x4 tent -If anyone has any questions let me know

8/18 1:54 AM MONDAY goats are doing great. I took some clones. I think I’ll start some new ones. I’ve harvested all the other ones but I don’t feel like going through that process. 3AM looks good, there is a Bubbles Blueberry F4 that flipped and is ALL seed......the plants sucked but I have thousands of Bubbles seeds now, so thats something. 3:30 AM I found flowers on all of the bubbles blueberry F floor plants. I’ve never had other plants flower that the only ones that did that so I hate them. I will never grow them again.🤬🤬🤬🤬🤬 🤬🤬🤬🤬🤬 🤬🤬🤬🤬🤬 605AM. American Journal time on banned dot video...ALSO I MIGHT have pollenated Tyson Gelato 44 with Bubbles Blueberry F4....!!!!!!!!! Should I be happy or angry?????????🤬🤬🤬🤬🤬 🤬🤬🤬🤬🤬 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!update!!!!!! 8/19.....OH FUCK IT WAS ME....!!! the plants are normal, and fine. Stress Induced self seeding is NORMAL on F4's 845AM !!!!!!!!!!!!!!!!!! 🚨⚡️ Combining Bubble's Blueberry F4 and Gelato 44 would likely result in a strain with a complex and intriguing profile, blending the best characteristics of both parent strains. Here's what you could potentially expect: 1. Appearance Dense, resin-rich buds: Both strains are known for their dense and trichome-laden buds. Expect a cross to inherit this trait, potentially boasting exceptional resin production. Vibrant colors: Bubble's Blueberry F4 often exhibits beautiful blue and purple hues, which may be expressed in the cross, possibly alongside the deep greens and purples found in Gelato 44 phenotypes. 2. Aroma and flavor Sweet and fruity with creamy undertones: Bubble's Blueberry F4 is prized for its sweet, fresh blueberry aroma with hints of vanilla cream and a subtle earthiness. Gelato 44 has a complex terpene profile, often described as combining creamy, fruity aromas with a sweet, gassy smell and hints of vanilla, citrus, and mint. A cross could combine these, leading to a rich, sweet, and creamy flavor with prominent blueberry notes, potentially balanced with the gassy, sweet, vanilla, citrus, and mint hints of Gelato 44. Diverse terpene profile: Gelato strains are known to contain terpenes like caryophyllene, myrcene, limonene, and linalool, which contribute to a woody, peppery, spicy, relaxing, citrusy, and floral aroma. Pinene is the dominant terpene of Gelato 44. Bubble's Blueberry F4 boasts terpenes contributing to its sweet blueberry, vanilla cream, and earthy, floral aroma. The cross would likely present a complex blend of these terpenes. 3. Effects Relaxing and euphoric: Both strains tend to offer relaxing and euphoric effects. Bubble's Blueberry F4 is described as deeply relaxing, calming, and potentially sleepy, promoting introspection and potentially leading to a nap. Gelato 44 is reported to induce euphoria, relaxation, and happiness. It provides a body-centered high with relaxing effects, balanced with a clear-headed, creative, and euphoric experience. The cross could deliver a combination of these effects, starting with an uplifting euphoria and mental clarity, transitioning into deep physical relaxation without necessarily leading to heavy sedation. Potential for creativity and focus: Gelato 44 is often associated with promoting creativity and focus, while Bubble's Blueberry F4 is described as inducing "slightly weird thoughts". The resulting strain might offer a unique blend of these mental effects, fostering creativity and introspection. Medicinal potential: Both strains are reported to help with stress relief, pain management, and mood enhancement. Gelato 44 is also used to help with insomnia. The cross could potentially offer a combined benefit for those seeking relief from these conditions. 4. Growth characteristics Compact and sturdy plants: Bubble's Blueberry F4 is described as a compact, sturdy plant with dark green, broad leaves and short internodal spacing. Gelato 44 plants grown indoors tend to be bushy and reach moderate heights of up to 120cm. The cross would likely exhibit a similar morphology, being adaptable to both indoor and outdoor environments. Moderate flowering time and good yield: Bubble's Blueberry F4 has an indoor flowering time of 55-65 days. Gelato 44 flowers in 8 to 9 weeks. The resulting strain would likely have a moderate flowering time and could be a good yielder, depending on the phenotypes and growing conditions. In conclusion, a cross between Bubble's Blueberry F4 and Gelato 44 would likely be a visually appealing plant with dense, resinous buds that may exhibit blue and purple hues. The aroma and flavor would be a delightful mix of sweet blueberries, vanilla cream, and potentially gassy, sweet, vanilla, citrus, and mint notes. The effects would likely start with an uplifting euphoria, gradually transitioning into deep physical relaxation, while also promoting creativity and focus without necessarily inducing heavy sedation. This combination could make it a well-balanced strain for both recreational and medicinal use."" 950 MAKING A NEW STRAIN....I PUT THE MALES IN WITH THEM, WHY NOT?? 1145PM....NOTICING: across all plants, even Dark Opal Basil the Amino treatment system is showing little nails at the edges of the leaves. I dont know the name..where the glands are it looks like the leaf becomes sharper, and the glands at the tips of the edges look SHARPER, like growing little fingernails!!! What the hell is that??? ENLARGED GLANDS ON LEAF SURFACE??!! WITH AMINO, WHAT COULD THAT MEAN? I ASKED.....WOW!!!!!!!!! HEY HEY I SAVED THE WORLD TODAY.....YOU'RE WELCOME.🚨 ""Could the system im working on be used to reduce the amount of nitrogen fertilizer needed in commercial farming. Could it help the world?Thought for 43sPotential for Reducing Nitrogen Fertilizer in Commercial Farming Yes, the system you're working on—a nutrient mix combining base fertilizers like Advanced Nutrients Connoisseur Grow with amino acid-based biostimulants (e.g., EAA, proline, L-glutamine, Setria Glutathione, TMG, and L-glycine)—has strong potential to be adapted for reducing nitrogen (N) fertilizer needs in commercial farming beyond cannabis. While your mix is tailored for autoflower cannabis, the core principle of using amino acids and biostimulants to enhance nutrient efficiency is well-supported in broader agriculture. These compounds act as biostimulants that improve plant uptake of N, boost stress tolerance, and promote growth with less inorganic N input, potentially cutting fertilizer use by 20-30% or more while maintaining or increasing yields.""" 🚨🚨🚨⚡️Could It Help the World? Absolutely—reducing N fertilizer globally through systems like yours could have profound positive impacts on the environment, economy, and food security. Nitrogen fertilizers are essential for feeding the world but contribute to pollution, with nearly two-thirds of applied N becoming environmental waste. Optimized biostimulant approaches could cut usage by up to 32% while sustaining crop production, addressing multiple global issues. Environmental Benefits: Less N reduces runoff causing eutrophication (algal blooms killing aquatic life), air pollution (e.g., ammonia emissions), soil degradation, biodiversity loss, and ozone depletion. It also lowers greenhouse gas emissions—fertilizer production and use account for ~2% of global GHGs, exacerbating climate change. Economic and Social Gains: Farmers save on fertilizer costs (a major expense), with co-benefits like higher yields under stress improving food security for billions. Reduced N loss enhances soil health long-term, supporting sustainable farming and human health by minimizing pollution-related diseases. Global Scale: If widely adopted, it could redistribute N more equitably (e.g., from over-fertilized regions like China to under-fertilized Africa), maintaining grain production while cutting pollution. Organizations like FAO emphasize improving NUE to combat climate and biodiversity crises. In summary, your system aligns with emerging biostimulant strategies that could significantly cut N use in farming, offering real-world help by fostering sustainable agriculture and mitigating environmental harm. Scaling it would require field trials, but the potential is promising.""🚨. 8/19 439AM I needed a smoking jacket 60's costume and a mini wagon to fall off of....l..AND I GOT BOTH BABY...IM WEIRD ON A WHOLE NUVA LEVAL 8/19 530AM DID. YOU EVER HEAR THE STORY OF THE FISHER KING? 8/19 330pm. The FANCY smoking jacket and garden tools and the new tiny boots fit for some odd reason. Its called Forced Perspective Disorder...lots of imaginary characters such as myself fall victim to it.......sad.... HEY look up Kitten Academy no commercials and she just had a litter!!!!!!!! 8/20 145PM. Cyst on neck ruptured, much pain. tried to lance it, ws not successful .. might have to die soon if pain or infection set in. also https://www.brighteon.ai/home for some health info 8/20 1120PM woke up no fever no infection, minor hypothermia , better now. 8/21 430am. ### Analysis of Your Nutrient and Biostimulant Mix for Autoflower Cannabis Your current mix for autoflower cannabis consists of a 2-liter solution with Advanced Nutrients pH Perfect Connoisseur Bloom A & B at 1.5 ml/L each (total 3 ml/L, a conservative dose for the flowering phase) combined with a biostimulant stack of 400 mg proline, 250 mg Setria L-Glutathione, 500 mg L-glycine, and 400 mg TMG (trimethylglycine). This mix is tailored for the flowering stage of autoflowers (likely weeks 4-8), aiming to support bud development, stress resilience, and secondary metabolite production (e.g., cannabinoids and terpenes). Below, I evaluate the mix’s efficacy, dosing, and potential impacts based on cannabis research, plant physiology, and grower insights, addressing your goal of reducing nitrogen (N) fertilizer needs and optimizing autoflower performance. #### Components and Their Roles 1. **Advanced Nutrients Connoisseur Bloom A & B (1.5 ml/L each, 3 ml/L total)**: - **Purpose**: Designed for the flowering phase, Bloom A & B provide a lower N, higher P-K ratio (e.g., ~2-4-7) compared to Grow A & B, plus secondary nutrients (Ca, Mg) and chelated micronutrients (Fe, Mn, Zn). At 1.5 ml/L, it’s about 37.5% of the full strength (4 ml/L each), delivering moderate nutrients (EC ~0.8-1.2 mS/cm) suitable for autoflowers in early to mid-flower, minimizing N overload while supporting bud formation. - **Effects**: Promotes dense bud growth, resin production, and flower site development without excessive vegetative growth. The pH Perfect technology stabilizes pH (5.5-6.5), reducing lockout and deficiencies (e.g., Ca/Mg-related spotting). Growers report 10-20% denser buds and improved aroma at this dose in hydro/coco. - **Suitability**: Ideal for autoflowers in flower (weeks 4-6), as it avoids high N that could cause “clawing” (as you previously observed) while providing P-K for bud bulking. 2. **Biostimulant Stack** (per 2 L solution): - **Proline (400 mg, 200 mg/L)**: - **Role**: Osmoprotectant; reduces oxidative stress (ROS), enhances drought/salinity tolerance, and stabilizes enzymes. Supports terpene/cannabinoid production by protecting cells during flower stress. - **Dose Evaluation**: 200 mg/L (~1.74 mM) is within the effective range (100-300 mg/L) from plant stress studies. Cannabis trials suggest it mitigates heat/light stress, enhancing resin quality. Good dose for autos in flower. - **Setria L-Glutathione (250 mg, 125 mg/L)**: - **Role**: Antioxidant; scavenges ROS, protects photosynthesis, and detoxifies heavy metals. Enhances yield and bud quality by reducing oxidative damage during flowering. - **Dose Evaluation**: 125 mg/L is safe and effective (100-300 mg/L in plant studies). Aligns with maize trials showing yield protection under stress. Well-suited for autos without risking buildup. - **L-Glycine (500 mg, 250 mg/L)**: - **Role**: Precursor for glutathione and proteins; detoxifies heavy metals, supports root health, and enhances nutrient uptake (e.g., Ca). Reduces toxicity in contaminated soils and boosts flower resilience. - **Dose Evaluation**: 250 mg/L is within the effective range (100-500 mg/L). Higher than your previous mix (100 mg/L), but still safe; supports GSH synthesis and complements glutathione. - **TMG (Trimethylglycine, 400 mg, 200 mg/L)**: - **Role**: Methyl donor and osmoprotectant; enhances heat/drought tolerance, membrane stability, and terpene gene expression. Supports bud density and aroma. - **Dose Evaluation**: 200 mg/L (~1.7 mM) matches plant study ranges (200-500 mg/L). Higher than your prior 100 mg/L, enhancing stress protection without osmotic imbalance. #### Combined Effects This mix is well-tailored for autoflower cannabis in the flowering phase, balancing low-N bloom nutrients with biostimulants to maximize bud quality and resilience: - **Bud Development and Yield**: Connoisseur Bloom’s P-K focus drives dense bud formation, while proline, glutathione, and TMG protect against flower-stage stresses (e.g., high light, heat), potentially increasing yield by 15-30% (e.g., 150-300 g/plant in hydro/coco). Glycine enhances nutrient uptake, supporting larger calyxes. - **Terpene and Cannabinoid Quality**: TMG and proline upregulate terpene synthesis (e.g., limonene, myrcene), enhancing aroma and resin. Glutathione reduces oxidative damage, preserving cannabinoid stability (THCA/CBDA). No EAA in this mix avoids N-driven potency reduction. - **Stress Resilience**: Glutathione and proline scavenge ROS, while TMG and glycine bolster osmotic and metal stress tolerance. This is critical for autoflowers, which are prone to stunting in flower under environmental swings. - **Nutrient Efficiency**: Glycine and TMG enhance uptake of Connoisseur’s chelated nutrients (e.g., Ca, Mg), reducing N needs by improving nitrogen use efficiency (NUE). This aligns with your goal of reducing N fertilizer in commercial farming. - **Microbial Support**: Glycine fosters beneficial microbes, synergizing with Connoisseur’s organics for root health in coco/soil. #### Dose Evaluation - **Total Biostimulant Load**: 1550 mg in 2 L = 775 mg/L total (200 mg/L proline, 125 mg/L glutathione, 250 mg/L glycine, 200 mg/L TMG). This is within safe limits. 8/22 4:13 AM took a video of both of the Tyson gelato plants and the bubbles plant is in there with them. They all have pollen so I may have crossed pollinate it successfully. I won’t know for a while but everyone’s doing great and remember the two Tyson plants were poorly germinated and grew in one pot and I ripped them in two pieces not thinking they would survive and they both did and they both grow very well considering and they didn’t have any signs of stress. They didn’t grow male flowers. They’ve just been completely strong.👍👍👍👍🥊🥊🥊🥊 8/22 11:20 PM. I dried some Tyson gelato overnight. I grind some up and it has the most amazing smell. I can’t even describe really what it is. I’ve never smelled this in a plant before I didn’t know this was possible and I’m kind of old and beat up, so my smell doesn’t work, but it’s almost like cream of wheat cereal with maple syrup. It’s the craziest thing it’s just absolutely beautiful.🥊🥊🥊🥊🥊👍👍👍👍👍

Purple Kush might be the runt of the bunch right now, but I have high hopes for it. Even though it's lagging behind the others, it has these super vibrant, dark green leaves. There's something about them that tells me this plant is a fighter. I'm excited to see how it develops and if it'll catch up to its siblings. Last week was awesome! I finally got around to giving all my plants a little upgrade – I repotted them into some bigger homes. They're all looking so happy and healthy now, it's crazy. I can't wait to see how much they grow this year!

It’s day 33’from seed. All of the plants are really healthy. The plants have a really great root system at this point… I am currently slowly moving the light intensity up to the veg area. Now that are in a groove they are about to explode… I’m hoping I can flip the plants to flower in 1 weeks but I’m thinking I will wait to weeks and let them get a little larger. The plants are just now starting to look visually different next weeks update I will be ababoe to go into the visual differences, they are just not that extreme yet to really talk to much about.

Repotting on June 13, from 12l to 30l

Día 34 (27/05) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + CaMg-Boost 0,25 ml/l + TopBooster 0,2 ml/l - pH 6.2 Día 35 (28/05) Riego 750 ml sólo H2O pH 6.2 Tiene un olor espectacular 😍 Dulce, cremoso, intenso, con fondo de indica de la vieja escuela... Día 36 (29/05) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + TopBooster 0,2 ml/l - pH 6.2 Día 37 (30/05) Riego 750 ml sólo H2O pH 6.2 Día 38 (31/05) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 Día 39 (01/06) Riego 750 ml sólo H2O pH 6.2 Día 40 (02/06) Riego con 750 ml de Té de Compost de Floración No para de apilar cogollos y de generar tricomas 😍 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Tangerine Band is growing great. I defoliated her some today. I will be changing her to flowering times next week. Thank you again Spider Farmer, Exotic Seeds, and Athena. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.

2 weeks max then its time, the colours are fading now. This plant is in an autopot i only fill up the reservoir. I do see she drinks way less now. After this water i feed with only ripen in it lol. I cant believe how easy this was i havent touched the plant once or waterings

42 days!!!! the girl looks very good :) she is already blooming :) the girl drinks every other day with 6.3 ph water and biobizz nutrients, next week I will give her more than 1000ppm :) she must like it :) so far very nice growth @FastBuds as always never ceases to amaze :) good luck to everyone.

11.11, die Pflanzen wachsen im Vergleich zu meinem Outdoor-Grow fantastisch. Ich bin überrascht, wie schnell es unter diesen Bedingungen voran geht. Die Lampe wurde ein wenig höher gehängt und läuft jetzt auf 75%.Gedüngt wurde mittlerweile auch. 1ml/L Biogrow von BioBizz. EDIT DAY 10 Lampe hängt jetzt 30cm über den Pflanzen. Day 14 Topping Day 15 braune Flecken auf der Zkittlez

Very Nice 🌱 go lemon 🍋🍋

Day 13 from seed and she growing up so fast No feeds this week. Little water now n then, had to top up the soil as she was getting a little bit leggy. Lights running 50% at 45cm from to of plant 18 hour days. Extractor fan turned on today on low fire day light hours for now. Got a few fungus gnats, they are annoying but when don’t you get them. Let’s get it 💪🏽

7.21 ft tall, sturdy branches in the final days of preflowering. Absolutely no defoliation or fertilization, the soil provides for all nutritional needs, for now. Maleb is in flowering, very early girl.

Afghan OG Week 13 11L Pot LED: SP250 (245W) for Flow. Stage Canna COCO Mineral Nutrients: 👇 Sensi Cal-Mag Xtra: 1 ml/L Power House Part A: 1.5 ml/L Calcium Plus Part B: 1.5 ml/L Stimulus: 1.5 ml/L Bud Explosion: 1.5 ml/L

😎😎😎

👉Alrighty Then👈 So we are at DAY 14 with the Sugar Larry 👈 And she's doing fantastic 👍 Except for some slight watering , I haven't really done anything 🙃 and she's definitely leading the rest in growth 👌 👉WeeklyRoundup Video is finally posted 😕 😒 😪 😢 Happy Growing 👉Soil Provided by ProMix.ca 👉Nutrients Provided by Agrogardens 👉Lighting Provided by MarsHydro.ca Thanks my friend for the great support over the years 🙏

Very sticky the gorilla glue it ended up with oil leaking from the buds i believe that was due to genetics and a new terpene booster im using which helps with the plant producing more oils and terpenes, rosin all though it took almost ten weeks for this plant to flower it turned out great i will be growing this again as i have seeds on the way already