This week I´va started to smell some sweet and fruity aromas... 😊😊😊 The buds are taking weight and the trichomes start shining 🙌

Added bud iignitor this week along with bulky b. Went to about 1031 ppm on the total nutes. Looking at just a slight tip burn but pushing them is how we grow gas!

Since she was too small compared to other plants I moved her to a smaller tent with a 100w led for the moment, in some weeks she will go back to Sanlight. I'm a bit worried that she will no flower, but she seems to indicate she is going pre flower. For sure will not take 65 days to harvest as the breeder claims. If she flowers and give good fruits I'm happy 😊

We are officially in full bloom. The have been enjoying 6-7 hours of sun light per day for about 4 days now, then brought back in under the cobs. The girls are all exploding with growth and stacking what I expect to be huge buds.

Things are getting good now.i haven't had any issues this week.i p.h my water and feeding at 6.4.i did a little flush to get rid of any build up there might be in my soil .I did feed this week with advanced connessiour bloom a and b one time with some b52.

Light settings 12/12 on at 9.00am off 9.00pm Light power= 62% 150w Radiator settings LIghts on Turn on if temp drops below 23c Turn off if temp goes above 23c Lights off Turn on if temp drops below 19c Turn off if temp goes above 19c Dehumidifier settings LIghts on Turn off if humidity drops below 60% Turn on if humidity goes above 60% LIghts off Turn off if humidity drops below 62% Turn on if humidity goes above 62% Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 9 Min speed 4 VPD aim 0.8-1.2 Wednesday 1/3/23 Day 36 Autofeed 5 15 minute runs Water 10L Ec=0.21 Ph=6.5/7.0 3L left Roughly 2.3L each. #1 no runoff 7.15pm Lowered light 3cm #1 DLI= 26.8 Thursday 2/3/23 Day 37 10.00pm Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 10 Min speed 5 Friday 3/3/23 Day 38 Autofeed 5 15 minute runs Feed 10L Ec=1.73 Ph=6.3 2.5L left. Roughly 2.5L each. #1 no run Saturday 4/3/23 Day 39 5.00pm #1 Height= 28CM Dist= 40CM DLI= 25.3 Lifted lights 3 clicks and Lst and defoliate Sunday 5/3/23 Day 40 Bit of Lst and scrogging Monday 6/3/23 Day 41 Autofeed 5 15 minute runs Feed 12L Ec=1.78 Ph=6.3/6.3 4.5L left Roughly 2.5L each. #1 no run #1 DLI=25.8 Lifted light #1 Height=29CM Dist=46CM DLI=21.0 Tuesday 7/3/23 Day 42 (Day 14 flower) Radiator didn't come on when it should have. It was cold today and I don't understand why the sensor didn't trigger the Radiator. #1 Height=29CM Dist=46CM DLI=21.0 The 2nd week of flower has gone well. I have tried to keep the canopy of the overall grow as level as I can, the only problem with running different strains is they all have different traits and grow at different speeds. Nearer the end of the week the weather started getting cold again so the radiator is going to be working a bit more over the next week or 2. #1 Wedding Cheesecake FF still hasn't started stretching so I'm thinking she is going to be a short and bushy. She is looking really healthy and I think she is spread out enough not to cause any problems with airflow. Power used for week Light (1.77+1.84+1.84+1.84+1.84+1.83+1.84)=12.8Kw Extractor (0.19+0.24+0.25+0.27+0.31+0.31+0.41)=1.98Kw Fans (0.48+0.47+0.47+0.47+0.47+0.48+0.48)=3.32Kw Dehumidifier (0.69+0.65+0.0+0.01+0.6+0.02+0.69)=2.66Kw Radiator (3.3+3.98+3.38+3.16+3.8+3.31+4.07)=25.0Kw Water pump. (0.02+0.0+0.02+0.0+0.0+0.2+0.0)=0.24Kw Total for the week=46Kw Back in a week. Thanks for stopping by.

Tag 36 (29 tage aus der erde) - alles gut Tag 37 (30 tage aus der erde) - 1500ml wasser - alles gut Tag 38 (31 tage aus der erde) - alles gut Tag 39 (32 tage aus der erde) - 1500ml wasser - alles gut - silikat auf den boden um den stamm gelegt (4g) - untere Blätter entfernen - video Tag 40 (33 tage aus der erde) - 1500ml wasser - Ich begann mit der "Pre-Flower" phase der nahrstoffe. - 1ML/L Bloom, 1ML/L Grow Tag 41 (34 tage aus der erde) - alles gut Tag 42 (35 tage aus der erde) - 1500ml Wasser - alles gut

both of my girls were very low in potassium... this mistake has been happening to me for a while now but I finally know the real reason :) she got CANNA kalium 2ml/L . and it seems that there are no more deteriorating leaves :)

Culture facile sans aucun soucis belle plante tres esthétique une merveille pour les amateurs de gout fruité

8ª Settimana di Fioritura 💐💐💐💐💐💐💐💐 Che bello vedere i suoi bud esplodere di cristalli 🤩🎇💚

Constructive interference is the phenomenon where two waves combine to form a new wave with a larger amplitude. This occurs when the peaks of one wave align with the peaks of another, and troughs align with troughs, causing their amplitudes to add together. For example, if two identical waves meet, their amplitudes will combine to produce a resultant wave with double the original amplitude. Constructive interference is a fundamental phenomenon based on the universal laws of nature, specifically the principle of superposition. 👋Top is a clean cut, no confusion for the plant, road ahead is clear, by completely removing the main growth tip, the auxin source is eliminated. The plant permanently halts vertical growth from that main stem and immediately sends its energy and hormones to the two new, evenly spaced branches just below the cut. Fimming slightly different because a small tuft of the top growth is left behind, the auxin disruption is temporary and less severe. The plant recovers more quickly and sends its energy to multiple surrounding growth points, often creating four or more new shoots from the same spot. It will eventually regain some vertical dominance after a few weeks if left to its own devices, but with a little more LST, bending the apex to the same height as the rest of the internodes, this shatters dominance, hopefully creating around 8-9 main shoots growing at equal height once recovered and grown out. Reduced environmental intensity for now and let her focus on dealing with this new stress for a week or two. When H+ ions are added to soil, the first nutrient displaced from exchange sites is typically aluminum (Al3+), if it's present, followed by calcium (Ca2+), magnesium (Mg2+), and potassium (K+), because aluminum and these base cations have different binding strengths. The order of displacement depends on the lyotropic series, where ions with a higher positive charge and those with weaker binding strengths are displaced first. The specific order of nutrient displacement is determined by the lyotropic series, which ranks the strength with which cations are adsorbed by soil particles: Al3+: Most strongly adsorbed, so if present, it will be displaced by H+ ions, leading to increased solubility of aluminum and potential plant toxicity. Ca2+: Displaced next, as it is more strongly bound than Mg2+ or K+ but less than Al3+. Mg2+ and K+: Displaced after Ca2+. The displaced nutrients can be lost from the root zone through leaching, becoming unavailable to plants. As H+ ions increase, the proportion of acid cations (H+ and Al3+) on the exchange sites increases, while base cations (Ca2+, Mg2+, K+) decrease, resulting in a lower soil pH. The amount of photosynthesis (water splitting) directly determines the availability of H+ ions (protons) in a plant. 90% of water is for cooling of photosynthetic apparatus the other 10% is split for its H+ among others things. Carbon sugars, like glucose, do oxidize in soil through a process primarily driven by microorganisms, which break down these sugars for energy. This oxidation converts the sugars into carbon dioxide (CO2) through cellular respiration, a key part of the soil carbon cycle, though some carbon may also be incorporated into soil organic matter. The rate and extent of sugar oxidation depend on factors like oxygen availability, the presence of Fe oxides, and soil redox conditions, which can all influence the process. My understanding of why we flush. Just plain water, what does it do? Strips the medium of salts and nutrients making it empty. What does that do? Triggers nutrient recycling within the plant. What's nutrient recycling? It is a natural part of plant senescence, which can be triggered once you know the switches. A 24:1 carbon-to-nitrogen ratio will also trigger. Why won't it trigger autophagy for me? Nitrogen needs to be gone, gone, gone almost. Ammoniacal (organic) nitrogen takes 4-5 times more water to separate it from soil particles than nitrates so what happens is most people jist flush the nitrates, leave all the ammoniacal in there and this prevents autophagy initiating. Nitrogen decays differently depending on its form during the dry. Ammoniacal nitrogen will oxidize in the air, leaving no trace. But nitrates do no decay and turn volatile and smelly and remain trapped until smoked, no matter how long you cure it does not oxidize. This is why you need to trigger it and begin the denitrification process prior to harvest to get rid of all the nitrates. Otherwise, you will smoke it. Flush till autophagy begins, just make sure you add no nitrogen afterwards. Micronutrients for trichomes. Don't leave the medium empty for 2 weeks, that does nothing but reduce yield 10%ish. Trichomes are another thing. Trichomes themselves are not directly affected by flushing; rather, flushing affects the plant's nutrient uptake, which influences the development and final state of the trichomes. Trichomes are filled with antioxidants in the last weeks, which is what makes them cloudy. A lot of the processing of antioxidants requires energy and nutrients (mostly micronutrients ), so you don't want that soil empty for 2 weeks, you just want the carbon nitrogen ratio 24:1and no higher. She still wants what she needs to ripen. Processing antioxidants is energy-intensive; heat and light accelerate the rate at which THC converts to CBN. This is why you lower DLI, lower temps. By doing so, you reduce the oxidative workload caused by photosynthesis, which opens up the oxidative capacity for the production of antioxidants. THC is mostly processed at night when the plant's oxidative capacity is generally moreso "free and available" for work. Oxygen is the alchemist's "fire"

Hallo Growfreunde, da bin ich wieder mit einem kleinen Update 🤗😁. Heute ist Tag 5 nach der Umstellung auf 12/12. Der stretch sollte sich bald bemerkbar machen, aber sollte keine Probleme geben, Platz ist da😎💪. Ich habe diese Woche den Tank das erste Mal nachgefüllt, allerdings diesmal mit nur 20L, damit das Wasser nicht so lange steht. Es hatte sich ein kleines CalMag problem angedeutet, was sich aber schonwieder eingependelt hat. Entlaubt habe ich auch. Große Fächerblätter wurden entfernt, aber sehen tut man dass nach 2 Tagen schon nicht mehr😅😅. Ende Woche 2 werde ich nochmal lollipoppen und entlauben, danach wird nix mehr gemacht. Mal sehen ob der Dünger bis zum Ende reicht😅

Flowering day 19 since the time change to 12/12. Hey all together 😀. This week she has developed beautifully ☺️. I poured it 3 times with 1.2 l this week. Tomorrow I will add the 2 g GHSC Powder Feeding Bio Bloom because the first blossoms are coming :-). I checked all the leaves thoroughly for pests or diseases and everything is fine ☺️. Next week I'll look at your roots as soon as the coconut is completely rooted. As every week, the tent was cleaned and the entire technology checked. The humidifier was also refilled every day 👍. In the next few days I will remove the bottom shoots so that the energy doesn't end up being wasted in the small popcorn buds. I wish you a lot of fun with the update. Stay healthy 🙏🏻 and let it grow 🍀 You can buy this Strain at https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ Type: Kosher Tangie Kush ☝️🏼 Genetics: Kosher Kush X Tangie 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Very pleased with the state of the Chemdawg bonsai, the ceramic cupcake reveal is working nicely. Still need to clean up those roots once they firm up a bit. She's also starting to show pre-flowers now. Meanwhile, the main Chemdawg is looking great, the octo-colas are shaping exactly like I hoped, and she's mostly outgrown the overwatered thing. That said, she's a very fast grower and I'm running out of horizontal room. I'll probably need to top her again just to slow her down compared to her tent-mate (Lemon Tart Pucker, growing in a much more indica fashion). Tent is still holding at 600 PPFD, 82 F (28 C) daytime temps, target VPD of 1.0. Did another Rootwise soak across the tent this week, plants seemed to enjoy it.

Yoyoyoyoyo party people! It's been week 2 of Flower, the stretch hit HARD! Starting at about 30-ish cm to 43 (with a lot of LST tho) developed an almost nice and even canopy already. Scrog net is always nice, and i highly recommend everyone trying it at least once! So far i only gave Plagron basic nutes and she looks great. I Like the product, contains a lot of product for the price, pH isn't drifting all over. With my light, i need to supply extra calmag, as you can see on the purple branches. I'm ashamed to admit, i've only done 2.5 reservoir changes in 12 weeks 💀 Please do it better. At least every 2 weeks! (or watch week 10💀💀) Already starting to smell something "sus". im excited every day looking into the tent. I hope i can even out the canopy as much as possible and then full on Blast with 40 DLI as much as possible. I adjusted both fans, so i have one below the canopy and one above, hopefully this will improve the wet spots that occur sometimes caused by the high humidity, caused by the high temps) Stats for nerds: DLI 30 inceased to 34 over this week VPD 0,7-0,85 (it was really warm, so i went with a lot of humidity, temps up to 34Celsius and rH 85 kekw Feel loved, take care of yourself, peace !

Hello Diary. Fourth week of flowering and the Hulkberries look great, two more weeks and we will have a harvest. 😎 The branches started to bend from the weight of the flowers, so after taking photos in the box I put wooden sticks to stabilize it. Hulkberry # 1 which is much more branched than # 2, got three rods because I had to connect almost every branch. At Hulkberry # 2, one rod was enough, and I tied it lightly around with a rope. 💪 The flowers look great and there are a lot of them, on the lower branches they are not so developed, but I expected that considering the shade from the upper branches and the distance of light. I’m not very great with descriptions, so I have photos that describe it a lot better than I will in words. 😉 Earlier this week I inserted two dehumidifiers that have some gel in them that gradually absorbs moisture, I can’t say anything drastic has happened, the humidity in the air is still higher than I would like at this stage. Two circular fans and a large exhaust fan that I put on maximum is all I can do at the moment. The temperature is also high in the box, it is around 28 degrees but sometimes it rises up to 29 degrees, but genetically they belong to a warmer climate, so it might suit them warmer. They look happy. 😎 As we get closer to the end, I decided this was the last week that they got BioBizz, so from now on they’re just on the water. I also made a little effort to take more photos. How could they not when they are so beautiful. 😍 Let’s take a look at what this week looked like. 02/08/2020 - Day 45. Watering. This time I watered only with water, I did not add BioBizz food. I still regulated the water at p.H 6.5 with Plagron’s, Lemon Kick. Each time I prepare 7 lit. water and with that I water all three plants evenly. 06/08/2020 - Day 49. Photographing and watering. Last feeding, I added BioBizz on schedule for week 7. In 7 lit. water I added BioBizz and adjusted p.H to 6.5. That's all for this week. The plants are beautiful, they smell great and now I can’t wait for the end. See you soon.