Vote Now 🏆 for the Grow Awards 2025!
2
13
Share
@Alchemy
Follow
Day 78 - I swear the Orchid is getting skunkier by the day. First thing I smell when opening the tent. Added some pics with a selfie seeds sticker to show the size None of the strains here are Selfie Seeds, sticker was used for showing the bud size. Day 81 - I'm so ready to smoke these plants. The Apple Banana Zoap smells just like the flower I ordered from LIT and it's sticky as hell so I know they're going to be fire even though they hermed. I removed a couple more nanners found lower on the branches that I couldn't see for ABZ#2, NO MORE found on ABZ#1 as of now... Checked PPFD again today: ABZ #1 - 810 PPFD | ABZ #2 - 875 PPFD | Biscotti - 750 PPFD | Black Orchid - 1040 PPFD Day 82 - Used the jewelers loupe and camera to compare for trichome quality against the microscope Day 83 - Noticing reduction in feeding consumption all around. ABZ 1: 0.9L | ABZ 2: 1.5L | Biscotti: 1L | Black Orchid: 2.0L Biscotti is giving a vanilla and lemon terp profile with the pine spice in the background now. It's nice tbh Day 84 - This is the last day of week 7 since flip, week 8 starts Tomorrow. I'll be dialing back my light a bit and the ppm. Pulled the ppm back a bit tonight as I've still seen issues with the nitrogen. Feed tonight was 926PPM. Might have a new nutrient mix to use on them Wednesday.... I can't get better pics with the microscope sorry, I'm too unsteady for that. (Maybe cause I turned the LED down on the microscope)
1
23
Share
@Naujas
Follow
Great :) GOOD START-HALF OF THE WORK !!!! The girl looks very good :) so far the small space does not cause any problems, for the first time I see that after you tried cutting off the main head, new branches grow from that place :) it will be really interesting :) I used LST a little until the height of the branches is even, and then I will try to do a scrog :) good luck to everyone :).
1
11
Share
Here we are at the halfway point, after the first month our photoperiod plants are multiplying their florets and then going into flowering. Jet Fuel has just undergone the topping of 8 florets, you can see the 4 fresh florets just cut. We are therefore at 8 very small branches growing, my plan for photoperiod plants is to get to 16, wait a few days and go into flowering. 16 florets as I see it is the perfect size for the 11 liter pot. Topping is an extremely delicate moment as regards cutting the florets to split them, we always take care not to damage the new growing florets. Topping is also a delicate moment as regards fertilization because the plant slows down and absolutely does not need all that nitrogen that it would normally need and that the producers recommend in their sheets. So you should arrive with the plant green and in perfect shape at this moment and dose the fertilizer very well for growth. Mine came from a slightly deficient veg because I kept it low fearing this over effect during the topping that I know well and now I'm a bit over. Nothing to worry about, of course, but if you do repeated topping my advice is to use preferred soil or prepare the soil with Monster Bud Mix by Zamnesia or Plagron Super Mix, in short, enrich the soil and start and only add nitrogen if necessary, especially during repeated topping. In any case, everything is under control and I will demonstrate it to you during the flowering phase. Wait for the Uncle BreadandBuds and see what it does to you. Remember the cold temperature makes the girls absorb food much more slowly than in summer so be careful to give the right amount and to dry the plant in maximum 2 days or you risk imbalances. We are always using soil, feeding and all the recommended additives from Plagron 100& organic we have only lowered the amount of grow in this topping phase for the reasons given above. ---- Decide on the right soil and calculate your fertilizer card based on the soil on the official website. -- www.plagron.com Try a seed of this strain that drives us crazy... ---- https://www.zamnesia.io/it/11258-zamnesia-seeds-jet-fuel.html Zamnesia Description // Jet Fuel (also known as G6, Jet Fuel OG, and G6 Kush) is a modern hybrid rich in THC and terpenes with a diesel aroma. Originally created in Colorado by crossing Diesel with Aspen OG, this 60% sativa-dominant hybrid is a must-have for any smoker who enjoys an uplifting and energizing high. Now, thanks to the hard work of our breeders, the original Jet Fuel is even easier to grow at home. Order your seeds, plant them in soil, and enjoy their rapid growth. After just 9–10 weeks of flowering, you can expect a generous harvest of premium sativa buds! All the best that mother nature can offer is on —— www.zamnesia.com *Sorry I Don’t know why I dont find the white background photo only for this strain
1
10
Share
Into veg week #5,*more photos added. Trying to get better photos for u * Did alil more tucking and bending not planing to do any heavy defoliation on her since humidity has been a lil low. Gonna leave them do their thing unless they get to overlapped they would get dropped in a heart beat lol. Had a issue with the tap water here, so went and grabbed a rv carbon water filter for a few bucks and problem solved 😔.. This lil lady will be flipping come week 6 tho, she's had plenty of time to recover from the initial topping and the other limb removal for clones . With the growdots next Sunday she'd be in the flipping window , 2tsp/gal has worked great in the past hope this goes just as well tho. More photos coming as the week goes. Thanks again anyone stoping in!!
1
Comments
Share
@Rcu1982
Follow
Light on Spider farmer SF4000 was turned up to 70 percent plant is doing better. Light is still 36 inches above plants in a 2x4 tent. I turned the light to 70% from 50% 3 days later I think I see some nanners starting. Possible light stress? I am going to let it all play out really interested in seeing what happens. I am all about the learning.
Likes
5
Share
@Ninjabuds
Follow
Hey there it’s been really cold lately it’s been hard to keep the humidity and temps at a decent range. A lot of the plants are showing stress from the environment. The pound cake auto is doing pretty well it has gotten a lot larger. This morning I finally saw some small pre flower hairs coming from the main stem. Also the stems in the plant seem to be starting to stench. So 90% sure buy the end of the week the plant will really be showing signs of flowering. Well just saying it’s flowing now. From what I see online this strain takes along time to switch to flower compared to lots of auto flower strains. This would be a perfect strain if you wanted to main line
3
Comments
Share
@Anditsch
Follow
All in all i had no problems when growing, except for the heavy mold infestation in all the main flowers at the end of the grow, a great pity, as half of the total weight had to be thrown away. And yes, there are 3 plants wrapped inside each other :D I will definitely grow them again.
Likes
3
Share
@Anditsch
Follow
No problems while drying. Really strong smell while drying you should use a filter-system for that.
Likes
3
Share
@Anditsch
Follow
No problems while drying. Really strong smell while drying you should use a filter-system for that.
Likes
3
Share
@TyRun
Follow
Intermediate Results Overview This grow was intense! Setting up the grow consumed so much of my time and focus that I started slacking at work, and it took me a month to get back on track. But hey, what’s the point of a job if it gets in the way of growing? 😉 In the end, everything worked out, and I gained invaluable experience. This was my first grow using coco coir. At first, I didn’t get it, but then it just clicked! Now I’m hooked: "I’m here to stay." Coco is more controlled than soil, flushes easily, and you can introduce beneficial microbes, which thrive in it. My main takeaway from this grow? If you buy coco, don’t forget CalMag! Next time, I’ll definitely install HEPA filters at the intake. The amount of dust was insane, and the grow box pulls air like a vacuum cleaner. Watching the timelapse, you can see the box sucking in every bit of dust. I vacuumed the intake filters weekly. The plant was incredibly sticky, but that also meant it caught a lot of lint and fibers between trichomes, especially visible under a microscope. Smoking microplastics? No, thank you! --- On CO2 CO2 only works if everything else is dialed in. If the plant experiences stress from deficiencies or overfeeding, you can forget about it. Since CO2 supplementation requires turning off the exhaust fan, it’s hard to manage temperature and humidity. The plant releases so much moisture that RH jumps to 80% within minutes. It’s doable, but definitely a challenge. --- On Magnetic Fields No clue what’s happening here yet, but it’s fascinating! I’ll test again with a control sample. --- Nutrients Dreams do come true—I’ve tested almost everything Advanced Nutrients offers. It wasn’t all smooth sailing; their feeding charts need adjustments for your conditions, and you usually need to feed less than recommended. Overall, I’d say the nutrients performed 100%, and I see no reason to switch. I’ll stick with them for future grows. --- Strain This strain is reliable, though not the most productive. It flowered exactly as advertised and delivered a frosty finish. It tolerated all my mistakes like a champ—especially mold. Despite an abandoned SCROG plan turning the plant into a bouquet, there wasn’t a single mold spot, even in the densely packed lower buds that got almost no light. Zero mold issues! --- Aroma As advertised: pine, wood, and citrus. At first, I thought it smelled like grapefruit, but now I’m leaning toward bergamot. Bergamot with a classic weed aroma—a recognizable twist on the usual scent. During the grow, the smell was strong, but the carbon filter handled it perfectly. --- Flavor It’s too early to say, but the flavor is definitely there! Embarrassingly, all my past harvests tasted the same—like nothing. Just smoke. This one has a distinct sour taste. I’m excited to see how it develops after curing. --- Effect Too early for a full review, but I love what I’ve tried so far. The high lasts about three hours, with euphoria and relaxation. It’s the perfect evening strain. I’ve smoked a lot over the years, but I’ve never experienced true euphoria—until now. Guess I’ve been stuck with garbage and ditch weed before. 😅 It’s not a strain for productivity or chores, but it’s perfect for chilling, watching something, or chatting. No anxiety, just great vibes. It feels like having a beer after a long day: you relax, and life feels good again. --- Roots The roots were healthy—maybe too healthy! While the AirPot (20L) prevented root circling, it didn’t eliminate it entirely. There were dead zones at the bottom where roots circled around the perimeter. A dense root mat formed at the bottom (so dense you couldn’t poke a finger through it), which likely contributed to salt buildup. Breaking through that mat required more water, and I suspect this caused EC to spike 1.5x the next day if there was no runoff. Next time, I’ll mix some pumice with the substrate at the bottom, about 3–4 cm deep. --- Timelapse I only got the timelapse running after the switch to flowering, so it’s not from the beginning. Still, it’s an incredibly useful tool for understanding growth rates. I’ll definitely use it for future grows. Comparing yesterday to today is one thing, but rewinding a week to see how things were is game-changing. I recommend it! You can even use an old phone with a timelapse app if your camera doesn’t support it by default. --- What’s Next I’ve grown fat buds before, but I’ve always neglected curing. This time, I’m doing it by the book with full control. Drying in the grow box with RH controlled at 50–60% (averaging 55%) for a slow, even dry. Temps are kept between 20–23°C, with frequent venting to keep it below 21°C for terpene preservation. After 7–10 days, when small stems snap with a characteristic sound, I’ll trim and jar them with humidity sensors. For the first two weeks, I’ll burp the jars twice daily, then reduce to once daily for the next two weeks. After that, I’ll monitor the RH sensors and adjust as needed. I’ll share the details after curing is complete. After drying, I’ll weigh the buds, take photos, and share another post in a month or two after curing to report on the flavor and aroma. For now, I’m taking a breather, fine-tuning my setup, and preparing for my next grow: Wizard Trees - Zangria S1.
Likes
3
Share
@TyRun
Follow
Intermediate Results Overview This grow was intense! Setting up the grow consumed so much of my time and focus that I started slacking at work, and it took me a month to get back on track. But hey, what’s the point of a job if it gets in the way of growing? 😉 In the end, everything worked out, and I gained invaluable experience. This was my first grow using coco coir. At first, I didn’t get it, but then it just clicked! Now I’m hooked: "I’m here to stay." Coco is more controlled than soil, flushes easily, and you can introduce beneficial microbes, which thrive in it. My main takeaway from this grow? If you buy coco, don’t forget CalMag! Next time, I’ll definitely install HEPA filters at the intake. The amount of dust was insane, and the grow box pulls air like a vacuum cleaner. Watching the timelapse, you can see the box sucking in every bit of dust. I vacuumed the intake filters weekly. The plant was incredibly sticky, but that also meant it caught a lot of lint and fibers between trichomes, especially visible under a microscope. Smoking microplastics? No, thank you! --- On CO2 CO2 only works if everything else is dialed in. If the plant experiences stress from deficiencies or overfeeding, you can forget about it. Since CO2 supplementation requires turning off the exhaust fan, it’s hard to manage temperature and humidity. The plant releases so much moisture that RH jumps to 80% within minutes. It’s doable, but definitely a challenge. --- On Magnetic Fields No clue what’s happening here yet, but it’s fascinating! I’ll test again with a control sample. --- Nutrients Dreams do come true—I’ve tested almost everything Advanced Nutrients offers. It wasn’t all smooth sailing; their feeding charts need adjustments for your conditions, and you usually need to feed less than recommended. Overall, I’d say the nutrients performed 100%, and I see no reason to switch. I’ll stick with them for future grows. --- Strain This strain is reliable, though not the most productive. It flowered exactly as advertised and delivered a frosty finish. It tolerated all my mistakes like a champ—especially mold. Despite an abandoned SCROG plan turning the plant into a bouquet, there wasn’t a single mold spot, even in the densely packed lower buds that got almost no light. Zero mold issues! --- Aroma As advertised: pine, wood, and citrus. At first, I thought it smelled like grapefruit, but now I’m leaning toward bergamot. Bergamot with a classic weed aroma—a recognizable twist on the usual scent. During the grow, the smell was strong, but the carbon filter handled it perfectly. --- Flavor It’s too early to say, but the flavor is definitely there! Embarrassingly, all my past harvests tasted the same—like nothing. Just smoke. This one has a distinct sour taste. I’m excited to see how it develops after curing. --- Effect Too early for a full review, but I love what I’ve tried so far. The high lasts about three hours, with euphoria and relaxation. It’s the perfect evening strain. I’ve smoked a lot over the years, but I’ve never experienced true euphoria—until now. Guess I’ve been stuck with garbage and ditch weed before. 😅 It’s not a strain for productivity or chores, but it’s perfect for chilling, watching something, or chatting. No anxiety, just great vibes. It feels like having a beer after a long day: you relax, and life feels good again. --- Roots The roots were healthy—maybe too healthy! While the AirPot (20L) prevented root circling, it didn’t eliminate it entirely. There were dead zones at the bottom where roots circled around the perimeter. A dense root mat formed at the bottom (so dense you couldn’t poke a finger through it), which likely contributed to salt buildup. Breaking through that mat required more water, and I suspect this caused EC to spike 1.5x the next day if there was no runoff. Next time, I’ll mix some pumice with the substrate at the bottom, about 3–4 cm deep. --- Timelapse I only got the timelapse running after the switch to flowering, so it’s not from the beginning. Still, it’s an incredibly useful tool for understanding growth rates. I’ll definitely use it for future grows. Comparing yesterday to today is one thing, but rewinding a week to see how things were is game-changing. I recommend it! You can even use an old phone with a timelapse app if your camera doesn’t support it by default. --- What’s Next I’ve grown fat buds before, but I’ve always neglected curing. This time, I’m doing it by the book with full control. Drying in the grow box with RH controlled at 50–60% (averaging 55%) for a slow, even dry. Temps are kept between 20–23°C, with frequent venting to keep it below 21°C for terpene preservation. After 7–10 days, when small stems snap with a characteristic sound, I’ll trim and jar them with humidity sensors. For the first two weeks, I’ll burp the jars twice daily, then reduce to once daily for the next two weeks. After that, I’ll monitor the RH sensors and adjust as needed. I’ll share the details after curing is complete. After drying, I’ll weigh the buds, take photos, and share another post in a month or two after curing to report on the flavor and aroma. For now, I’m taking a breather, fine-tuning my setup, and preparing for my next grow: Wizard Trees - Zangria S1.
1
10
Share
Purple Punch am 26.12.2024 Tag14 / 11.01.2025 Die Pflanze ist kompakt mit saftigen Blätter. Habe sie mir unter der Lupe angeschaut, es gibt nichts was mir Sorge bereitet.
1
6
Share
@Aleks555
Follow
42FAST Buds - Gorilla Cookies Auto - 67 days The buds are getting bigger and bigger, coated with sugary trichomes. While the trichomes are still clear, we couldn’t resist trying a small bud from the lower branches, and we’re pleased with the results! But it’s still a bit early, so we’ll wait for full maturity before harvesting. Exciting times ahead—stay tuned for more updates!
Likes
50
Share
@nonick123
Follow
Día 78 (06/01) CBD Auto 20:1 #1 - El amarilleo continua... esperando que haga efecto el SILICIUM FLASH 💥 OG Kush Auto - Empieza la ventana de cosecha: Reviso los tricomas y solo hay algunos nublados (el resto trasparentes), pero creo que acabará en una semana más como máximo! Día 79 (07/01) CBD Auto 20:1 #1 - Parece que el amarilleo se frena un poco. ¿Será suficiente y formará unas buenas porras? OG Kush Auto - Riego 750 ml. Está consumiendo mucha agua en este tramo final! 😍 Día 80 (08/01) CBD Auto 20:1 #1 - Está recuperando el verdor! El SILICIUM FLASH está haciendo efecto! OG Kush Auto - La planta no para de beber y las ramas se doblan por el peso de los cogollos! 😍💥 Día 81 (09/01) CBD Auto 20:1 #1 - Los cogollos empiezan a coger mayor densidad. Según mis cálculos, le faltan 17 - 24 días OG Kush Auto - La senescencia sigue avanzando pero los tricomas aun no están listos (50% nublados). Espero cosechar en el día 84 aproximadamente Día 82 (10/01) Busy day Día 83 (11/01) CBD Auto 20:1 #1 - El SILICIUM FLASH ha hecho efecto y empieza a retomarse el verdor en las hojas! Que maravilla! OG Kush Auto - Los tricomas están mayoritariamente nublados y algo ámbar. Mañana la cosecha! 😁 Día 84 (12/01) CBD Auto 20:1 #1 - Los cogollos empiezan a apilarse y a engordar 😁 OG Kush Auto - Día de cosecha! 😍💥💨😁 FastBuds 15% DISCOUNT code "NONICK" 2fast4buds.com @fast_buds_official_ @fastbuds.official 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp
Likes
6
Share
@Aleks555
Follow
Zamnesia - Pineapple Express (F1 Auto) - 67 days We’re considering starting the flush before harvest soon. The aroma is incredible—pineapple and honey notes fill the air. We tried a lower bud a week ago, and we were impressed by both the potency and the amazing taste. This strain has rock-hard buds and truly stands out! Highly recommended to everyone—we’re absolutely blown away by this fantastic strain!
1
62
Share
@nonick123
Follow
Día 78 (06/01) CBD Auto 20:1 #1 - El amarilleo continua... esperando que haga efecto el SILICIUM FLASH 💥 OG Kush Auto - Empieza la ventana de cosecha: Reviso los tricomas y solo hay algunos nublados (el resto trasparentes), pero creo que acabará en una semana más como máximo! Día 79 (07/01) CBD Auto 20:1 #1 - Parece que el amarilleo se frena un poco. ¿Será suficiente y formará unas buenas porras? OG Kush Auto - Riego 750 ml. Está consumiendo mucha agua en este tramo final! 😍 Día 80 (08/01) CBD Auto 20:1 #1 - Está recuperando el verdor! El SILICIUM FLASH está haciendo efecto! OG Kush Auto - La planta no para de beber y las ramas se doblan por el peso de los cogollos! 😍💥 Día 81 (09/01) CBD Auto 20:1 #1 - Los cogollos empiezan a coger mayor densidad. Según mis cálculos, le faltan 17 - 24 días OG Kush Auto - La senescencia sigue avanzando pero los tricomas aun no están listos (50% nublados). Espero cosechar en el día 84 aproximadamente Día 82 (10/01) Busy day Día 83 (11/01) CBD Auto 20:1 #1 - El SILICIUM FLASH ha hecho efecto y empieza a retomarse el verdor en las hojas! Que maravilla! OG Kush Auto - Los tricomas están mayoritariamente nublados y algo ámbar. Mañana la cosecha! 😁 Día 84 (12/01) CBD Auto 20:1 #1 - Los cogollos empiezan a apilarse y a engordar 😁 OG Kush Auto - Día de cosecha! 😍💥💨😁 FastBuds 15% DISCOUNT code "NONICK" 2fast4buds.com @fast_buds_official_ @fastbuds.official 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp
Likes
62
Share
@nonick123
Follow
Día 78 (06/01) CBD Auto 20:1 #1 - El amarilleo continua... esperando que haga efecto el SILICIUM FLASH 💥 OG Kush Auto - Empieza la ventana de cosecha: Reviso los tricomas y solo hay algunos nublados (el resto trasparentes), pero creo que acabará en una semana más como máximo! Día 79 (07/01) CBD Auto 20:1 #1 - Parece que el amarilleo se frena un poco. ¿Será suficiente y formará unas buenas porras? OG Kush Auto - Riego 750 ml. Está consumiendo mucha agua en este tramo final! 😍 Día 80 (08/01) CBD Auto 20:1 #1 - Está recuperando el verdor! El SILICIUM FLASH está haciendo efecto! OG Kush Auto - La planta no para de beber y las ramas se doblan por el peso de los cogollos! 😍💥 Día 81 (09/01) CBD Auto 20:1 #1 - Los cogollos empiezan a coger mayor densidad. Según mis cálculos, le faltan 17 - 24 días OG Kush Auto - La senescencia sigue avanzando pero los tricomas aun no están listos (50% nublados). Espero cosechar en el día 84 aproximadamente Día 82 (10/01) Busy day Día 83 (11/01) CBD Auto 20:1 #1 - El SILICIUM FLASH ha hecho efecto y empieza a retomarse el verdor en las hojas! Que maravilla! OG Kush Auto - Los tricomas están mayoritariamente nublados y algo ámbar. Mañana la cosecha! 😁 Día 84 (12/01) CBD Auto 20:1 #1 - Los cogollos empiezan a apilarse y a engordar 😁 OG Kush Auto - Día de cosecha! 😍💥💨😁 FastBuds 15% DISCOUNT code "NONICK" 2fast4buds.com @fast_buds_official_ @fastbuds.official 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp