Day 88-89 - PH still out of whack. Did a Res change, and still having the same PH problem. It drops hourly. PPMs now around 700. I added 1/4tsp of SubCulture B with the res change this time. Day 90 - 38F - Added a second air pump to Res. Both airstones were engulfed by roots, so i moved one into a more open area, and the second pump doubled the bubbles and the res is now moving much more. Day 91 - 39F - PH was back to normal! (5.9). Hoping it was the lack of oxygen.. Day 92 - 40F - PH was still 5.9. Seems like everything is back to normal. Day 94 - 42F - Changed Res/Nutes.

Started the first top dressing of Gaia Green All Purpose and Power Bloom at a 50/50 ratio of 1tbsp/gal each.

this one seems to be keeping up with the others pretty well, wish it had produced some larger leaves prior to flip but oh well

Need to replace last hydro system 'cause pump from china isn't a good deal... more simple to use/ to don't have issues with DWC and less scaring moments when put my finger in solution and and device plugged is in all growing fast and there's nothing i can do now unless waiting flower time (and add Cal Mag next week :D) Don't want to practice LST/defoliation unless every one have her space don't want to topping nothing at all (bad experience with auto) Any suggest? Italian fruit is an autoflowering lady ready in four months with loong flowering season. (30% ruderalis :O) (Solution is micro adv base /Humic/Voodoo/Zym) Waiting Co2 System with timer (solenoid switch) from Aliexpress to give about 5/55 - extraction/co2 (per Hour) some algae trying to grow on soil during long session of CO2 Bye!

This week I added a new controller to handle up to 8 functions. I installed a new heater, my old humidifier and some LED strips to the controller. Targeting a VPD at 1.0 day and night. Trying to keep the nutrient ppm under 900 and ph at 6.0 in the reservoirs. Ordered a second ph pen because I don’t trust my readings. Will be here by Thursday. Friday: Checked the ppm in the reservoirs and it’s at 1,000. Added more RO water with extra nitrogen to bring the ppm level down to 925. Saturday: I installed an updated AC Infinity controller 69 Pro Plus (controls 8 pieces of equipment) which allowed me to add a humidifier, corner LEDs and a heater to the controller. Overall I’m extremely impressed with this AC Infinity equipment. My VPD is within the range I want to achieve (.8-1.1). I programmed it to maintain 78 degrees and 67% humidity during the day, 73 degrees and 63% humidity at night. Charts posted also show the impact of an open tent compared to the closed environment. The heater is constantly pushing fresh air into the tent, so I don’t need to cycle the exhaust fan often. Rewired the tent again and moved the controller later that night. I mounted the controller on the wall. Added Mars Hydro UV/IR lighting to fill out all 8 slots on the controller. Sunday: I checked the ph in the reservoirs (6.8….i had filled it with 6.0 ph) and the ppm (1200 ppm…I had filled it with 900). So evaporation and possibly a mismeasurement of ph. I topped ff reservoirs with slightly stronger nutes and adjusted ph to 5.8 in the reservoirs. Poor magnesium absorption could be driving some leaf yellowing. Effective tomorrow, I’m switching over to Heads Formula which consistently feeds GH Flora series nutes at Micro (6ml/g), Bloom (9ml/g) and cal mag (3ml/g). Turned on the UV/IR lights for 3 minutes every 8 hours. I’m easing the plants up to 5 minutes every 6 hours which will provide the recommended 20 minutes of IR per day. This will help the plants stretch a little more. Monday: checked ph and ppm in reservoirs. 6.1ph and 880ppm. VPD remains stable except when I open the tent. Tuesday: checked ph (6.4) and ppm (880) in reservoirs. Added .5ml of ph down to two reservoirs. Still see slight yellowing between the veins but it’s not getting worse (might be improving). Adjusting ph down to 6.0 target might have solved this. The plants grew by 1-2” last night…..is the infrared light working already? Decided to mix up fresh nutes for the reservoirs following Heads formula. 6ml Micro and 9ml Bloom per gallon of RO water. Added 5 ml of CalMag too. Ending ppm was 1080 which is too high, so I diluted down to 880 with RO water. 6.0 ph. Wednesday: plants grew another .75 inches last night. I topped above the 5th node. Thursday: added RO water with heavy cal mag to reservoirs to increase amount of CalMag available.

My house is full of sweet chocolate and fruit aroma:) her flowers are full of shiny trichomes :) the girl only bloomed for 57 days, but she is already ready, maybe her flowering sped up in my grow box, high temperature 33°, because of that under my arm my light was set to 85%. From the first days, the girl showed fast and healthy growth:) I made a timelapse video, but unfortunately due to problems with the SD memory card, it takes 3-4 days at the end of the video, besides, my tent is too small for that :D I also made bubble hash from sugar leaves myself :) I tried Zamnesia seeds for the first time - I hope that someday this seed bank will offer me its products to try again :) thank you all. you were together :) good luck with the growing.

👉 ( Floração ) 👈 📅 Total de Dias 64 (F 34) - 05/10/2021 / 💦 Rega com nutrientes. (Planta 2,3 e 5 não foram regadas. Planta 1 e 4 rega com nutrientes) 📅 Total de Dias 65 (F 35) - 06/10/2021 / 💦 Rega com nutrientes. 👉 ( Planta 2,3 e 5 Rega com nutrientes ) 👈 📅 Total de Dias 66 (F 36) - 07/10/2021 / Crescimento normal 😀 📅 Total de Dias 67 (F 37) - 08/10/2021 / 💦 Rega apenas com agua (Planta 4) 📅 Total de Dias 68 (F 38) - 09/10/2021 / 💦 Rega apenas com agua ( Planta 1, 2, 3 e 5 ) 📅 Total de Dias 69 (F 39) - 10/10/2021 / 💦 Rega apenas com agua ( Planta 4 ) 📅 Total de Dias 70 (F 40) - 11/10/2021 / 💦 Rega apenas com agua ( Planta 1 e 4 não foram regadas ) 👉 MARSHYDRO 👉 CODIGO PORMOCIONAL : Grow3rPT 👉 Em marshydro.eu 3% de desconto em qualquer produto

It’s day 33’from seed. All of the plants are really healthy. The plants have a really great root system at this point… I am currently slowly moving the light intensity up to the veg area. Now that are in a groove they are about to explode… I’m hoping I can flip the plants to flower in 1 weeks but I’m thinking I will wait to weeks and let them get a little larger. The plants are just now starting to look visually different next weeks update I will be ababoe to go into the visual differences, they are just not that extreme yet to really talk to much about.

Flush Day! Well they look good and got amber trichomes on all plants around 20% which im happy with. did a 4L flush per plant! I did another haircut which took off the rest of the fan leaves, and man my finger were soooo sticky.. ridiculous resin production. woop woop I am curious how much i'm going to yield off these.. I feel i am still learning, and this grow was better but not perfect. I wish the cola to be a bit more dense n closer internodes. oh well. Another grow will be on the way so stay tuned? I will flush once more then hopefully have harvested and drying within 2 ish weeks.. anyways stay safe yall n keep it sleeeezy

Ab hier wieder auf Deutsch. #1 ist heute 37 Tage alt, #2 26 Tage. Ich habe versucht diese Woche etwas besser zu dokumentieren um den Report ab hier sauber zu führen. Beide Pflanzen haben 5G Bloom pro Liter Erde bekommen und wurden mit Enhancer gegossen, sie zeigen keinerlei Mängel und der Trieb der gebrochen war hat sich erholt. Ich habe bereits das SCROG Netz über den Pflanzen installiert. Auf Anfrage hat mir GC mitgeteilt das ich ab morgen den Blüte Dimmer der PWR-4 auf 25% stellen soll. Dann BW2 auf 50 und BW3 auf 100%. Ich freu mich schon auf die nächsten 7 Wochen.

Chopped the Blue Gelato 41 due to it going hermie, this plant seems to be fine at the moment but will be keeping a close eye on it! Buds getting so heavy it’s leaning to one side, starting to flush tomorrow🌱 Looking forward to finishing off this grow, so many mistakes have been made but still learning. Mistakes will be corrected for the next grow! Little seed on Runtz Muffin, going to chop, clean tent and start from scratch.

Just a nice sativa hybrid. Nice colors, stems are strong for a sativa. Smell is great, sweet for now. I did up getting pollen and since it was bushy the nylon filter worked on both plants but STS dripped a bit on branches around it...i cleared thise branches. I am happy to announce its preggers so i loosened the wires on the branches and will be doing just ro n some low supplements for now after i dumped good amount dr earth flower girl and topped it with coco about qeek ago

She is a great strain thus far. My tent has been getting a bit hotter in the summer. Just a bit of issue though. Can't wait to try this one. Such a sweet candy smell.

Very healthy minor issues with humidity the box have now dehumidifier and ventilators

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 REMO NUTRIENTS 👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme

Rapier looking so sweet! 😍👌 next update will be a harvest! (ithink.. must beware of budrot.. next week weather is gonna change for the worst..) happy growing 4all✊ KISS! growtechnique: KeepItSimple, Stupid!

Pretty much been hands off. Letting drip system take care of watering, and controller and inkbird manage climate and humidity. Been weening it off nutes. From 15-1800ppm to 9 to 450 today. All cloudy now so no more feeds. Little leftovers from final res top off then straight water till the ambers show up. Aiming for few. 5-10%