HLG 350R hanging with the Mars Hydro UR45 -added a clone of a Malt Milkshake -clones I took from these plants, majority have rooted so far and transplanted

Week 6 Flower — Sundae Driver (deep dive) Quick recap — From seed to Week 6 • Germination: Pillbox + water enriched with Aptus Regulator / Start Booster; three seeds, two kept. • Early transplant: Seedlings moved directly into final 11 L fabric pots with a living / amended super-soil (Janeco Light Mix + Aptus line + mycorrhizae, substrate buffer, micro-mix). • Short veg: Minimal veg time (early transplant strategy), light training (leaf-tucking) and one deliberate supercrop to control a “moon-shot” top. • Flower flip: You used an 11/13 light schedule to encourage a firm, fast transition into flower. • Now: Week 6 of flower — plants are large, heavy, and beginning to show clear resin development. ⸻ This week’s snapshot (what you told me) • Solution EC: 0.7 mS/cm (you stopped All-in-One liquid and pulled solution EC down) • Solution pH: ~6.1 • Soil/substrate EC: still comparatively high (you reported earlier numbers around 5–6 mS/cm) — the living soil is doing the heavy lifting. • Feed plan kept: Plagron PowerBuds, Green Sensation, Sugar Royal (all low-dose), plus Aptus Regulator and Aptus CalMag Boost. • Plants: heavy, bulking, obvious frost/trichome production; supercrop site is producing well. ⸻ Why you lowered solution EC and stopped the All-in-One liquid • Letting the soil lead. Your living, richly amended soil already holds lots of available ions. Pulling water-solution EC back to ~0.7 makes the fertigation a light steering input rather than the dominant nutrient source. That reduces the risk of salt buildup while letting the soil biology and reserves feed the plants. • Encouraging ripening, not more vegetative growth. Lowering soluble N input and total EC reduces vegetative vigor and encourages the plant to reallocate energy into flower development and resin production. • Cleaner profile. A lighter solution often helps express terpenes and can reduce harsh residual taste if you choose to flush later. • Risk management. With a high substrate EC you avoid compounding salts, but you must monitor runoff EC/pH to ensure you’re not drifting into deficiency or toxicity. ⸻ Trichomes & white pistils, what you’re seeing and what it means • White pistils (hairs): still plentiful, the plant is mid-flower, still producing new pistils while older ones will start darkening in the coming weeks. A lot of white pistils now is normal at Week 6; they will darken and curl as maturity approaches. • Trichome types & stages: you’re seeing more glandular heads and sticky sugar leaves. Trichomes progress roughly: clear → cloudy/milky → amber. • Clear: immature (not peak potency) • Cloudy/milky: peak cannabinoid expression, usually target harvest for a balanced high • Amber: more degraded THC → more sedative, couch-type effect; some amber is normal depending on desired effect • What heavy trichome coverage now means: the plants have moved into active resin production; enzymes and carbon flux are being directed to terpene and cannabinoid pathways. Continued support (sugars, PK, stable environment) helps maximize resin and terpene development. ⸻ Supercrop update — technical recap & why it worked • Mechanics: you bruised/softened the stem, bent it, and closed the wound so the plant formed a strengthened knuckle. That redirection reduces apical dominance and sends auxin to lateral sites. • Results you observed: rapid curve-up, additional bud sites along the bent branch, and notable fruiting at the knuckle/top area. That’s expected, the wound redirects hormonal flow and the plant compensates by boosting side growth and flowers. • Monitoring: the knuckle strengthens over 3–7 days; watch for any slow-healing splits and keep airflow over the site to prevent moisture pooling. ⸻ Why you kept Plagron + Aptus (what each brings) • Plagron PowerBuds / Green Sensation / Sugar Royal: targeted bloom stimulators (PK, co-factors, carbs/aminos). They help compact flowers, feed terpene pathways, and provide sugars/precursors that support aroma and density. • Plagron Sugar Royal: acts as a carbohydrate/secondary biostimulant — supports microbes and gives a sugar boost that plants and microbes use for energy in resin synthesis. • Aptus Regulator: supports stress resilience, uptake efficiency, cell wall strength — especially valuable under high light/heat. • Aptus CalMag Boost: maintains Ca/Mg balance, essential for cell structure and avoiding tip burn when uptake is rapid. • Strategy: Plagron drives bloom chemistry; Aptus protects physiology and supports clean uptake. With soil heavy on reserves, both are applied as focused steering tools. ⸻ Week 6: What is happening physiologically • The plant transitions from stretch to stacking: calyxes thicken, pistils begin to darken in the coming weeks, and trichome density increases. • Carbohydrate flux is prioritized to the floral sink; you’ll see faster water uptake and increased K demand. • Leaf yellowing in lower leaves often begins around now as N is remobilized to flowers, this is frequently normal in mid-late flower if controlled and not extreme. ⸻ What to expect next (practical timeline & signals) Expect (over the next 1–3 weeks): • Continued calyx swelling and denser flowers. • Trichomes moving from mostly clear → cloudy (you’ll start seeing the ‘frost’ become more opaque). • Stronger terpene aroma as sugars and PK feed resin pathways. • Heavier water uptake and faster EC changes between runs. Don’t expect (yet): • Final resin peak — that typically comes later (weeks 7–10 depending on genetics). • Immediate massive ambering — amber trichomes usually develop later in the finish window. • No surprises — biological systems still can flip; remain monitoring-forward. Watch closely for: • Runoff EC & pH after a couple of waterings — if runoff EC climbs very high, consider a mild runoff correction. • Humidity & bud density: keep RH controlled to avoid botrytis (mid 40–55% during heavy stacking; lower as flowers bulk). • Magnesium / Potassium signs: interveinal yellowing (Mg) or edge cupping/crisping (K) — maintain CalMag and consider K if uptake accelerates. ⸻ Actionable checklist for Week 6 • Continue solution EC ~0.7 and pH ~6.1; treat fertigation as steering. • Measure runoff EC/pH at least once this week — log the results. • Keep Plagron bloom stack + Aptus Regulator & CalMag at light doses. • Keep canopy airflow high; consider lowering RH progressively if buds bulk fast. • Prepare stakes / soft ties or light trellis for heavy colas (supercrop sites may need support). • Microscope checks: start daily/alternate-day inspection of trichomes with 30–60× loupe — photograph if you want a timeline. • Avoid heavy new training; minor tucks/leaf removal to open air/light only. ⸻ A short note on flushing (planning) • Many growers flush with pH-balanced plain water 1–2 weeks before harvest to reduce soluble salts and tighten flavor; opinions vary. If you intend to flush, start planning timing based on trichome stage, not calendar alone. Your living soil and current low-solution EC approach already help keep things cleaner. ⸻ Final reflection — gratitude & community Week 6 is where the plant’s intent becomes visible: form into flower, pack on weight, and build resin. Your measured decision to pull back water EC while continuing Plagron’s bloom stimulants and Aptus support is a smart “steer, don’t force” approach that lets the living soil and the plant do the heavy metabolic work. 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. • GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial • Instagram: https://www.instagram.com/dogdoctorofficial/ • YouTube: https://www.youtube.com/@dogdoctorofficial ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: • Genetics, gear, nutrients, and more – Zamnesia: https://www.zamnesia.com/ • Environmental control & automation – TrolMaster: https://www.trolmaster.eu/ • Advanced LED lighting – Future of Grow: https://www.futureofgrow.com/ • Root and growth nutrition – Aptus Holland: https://aptus-holland.com/ • Nutrient systems & boosters – Plagron: https://plagron.com/en/ • Soil & substrate excellence – PRO-MIX BX: https://www.pthorticulture.com/en-us/products/pro-mix-bx-mycorrhizae • Curing and storage – Grove Bags: https://grovebags.com/ ⸻ We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚

Had a lot going on this week so the plants didnt get any care or maintenance at all other than just checking on the water level a couple times. They need some major defoliation which I wanted to do this week but procrastination is the vibes currently. Will probably get some done next week.... the plants are looking good and most of them are bushing out pretty nice. They dont seem to be stretching as much as they normally do by this time, but they are transitioning to flower. Will probably do a flush and water change soon since they haven't had one in over a month. I'm just anxious to see some frosty buds at this point.

Světlo jede na 50% a teplota stoupla na pouhých 23,3°C přes den. Doufal jsem trochu víc ale nic s tim bohužel neudělám D29: 3 dny po přesazení holek do 11 L květináčů Shogun 5 a Haze Berry 1 mají na spodních listech trochu popálené konečky 😓 , ale jinak vypadají spokojeně. Asi jsem použil trochu více BioBizz Worm Humus během přesazování. Zbylé holky vypadají velmi spokojeně a mají sytě zelené listy které jsou naprosto bez vady 😍 7 rostlin má momentálně 5 nodů jedna rostlina už 6, takže v druhé polovině týdne začnu s vytvářením potrubí na main-linning. Už se nemůžu dočkat až začnu s tréninkem 😍 D31: Každá rostlina zalita 500ml čisté vody bez živin D33 čtvrtek: Holky jsem zastřihl u 3. Nodu a vyčistil od zbylého porostu. Ponechal jsem pouze přilehlé listy u rostlin s menšími větvemi. Povedlo se mi zlomit jednu větev u Haze Berry 1 během LST :'( zranění jsem ošetřil ale po 8 hodinách je zřejmé že větev nepřežije :'( Vysadil jsem 3 semena Sweet Orange XL od českých pěstitelů z Natural Seeds jako náhradu za zlomenou větev Každá rostlina dostala 1L vody s živinami které můžete vidět v tabulce D35: Vyklíčila všechna semena Sweet Orange XL. Všechna ve stejný den :)

Week of sweeping has occured... I doubt there going to get any taller just alot fatter.. the gorilla punch is a mutant and is turning purple early on so we may have a full purple buds! The banana purple punch is crazy triched out early on and can't wait till it finishes!

Since the plant was growing to much i perfromed LST and tied it down a bit

Hello and welcome growmies & friends👋....Another slow week for me and the girls most of the workload i fought with the moisture in my basement where my grow room resides and the size is 140x142 centimeters 16.08. I add Jungle Indabox: A: 25ml. B: 75ml. M: 50ml. x: 25ml. Hesi Power Zyme: 115ml. Canna Cal Mag: 50ml. Canna PK12/13: 80ml. AtaBloombastic: 25ml. Ata Clean: 3ml PH: 6,18 EC: 2,8 18.08. Killer Kush #4 shows probable signs of Cal Mag deficiency but in case i drop in some more nutes, she looks like she needs it...the girl # 4 is about a week late in flower compared to the rest. I add Jungle Indabox: A: 20ml. B: 70ml. M: 50ml. X: 20ml. Canna Cal Mag: 70ml. Atami Bloom: 20ml.. PH: 6,25 EC: 3.2 20.08. Girl #4 still shows something like i think Cal Mag deficiency but all the other Killer Kush plants already have dark green leaves so i add only: Canna Cal Mag: 45ml. Canna PK12/13: 80ml. As of today all the plants look healthy, I'm dropping my first video in the next weeks there will be more to watch, at least i hope so. In the video i made a mistake at the begining describing the right side the left one....sorry for that, will try to do a better job in the future. That's it for this week I hope everyone had as good a week as i did, hopefully see you next week ...all the best to you my friends and keep it growing.💪

Hi guys, I have a power outage in my village for 2 hours on the V+4 😒 but it's ok don't have problem. 👍 just a little trick I see she needs more ratio of air humidity, I put a plate with water in it to see with the heat if it evaporates. 😀 i have cut the head on the day 11. switch to 18/6 on the day 12

Simplemente una de las mejores Super Silver Haze o muy parecido que probado! Una pasada de sabores cítricos y terroso a la vez...hay que decir que sabor a Lemon predomina! Una gozada Farmers.

this week start defoliation, smell strong, 💪

Going good, still a bit of powdery mold. Spraying milk & water once a week. Slows the mold down but it comes back. Not too worried they're going outside within a few days. Gonna spray them again tonight just to make sure.

Entramos en prefloracion, estiran cada dia! Mucho calor aun pero aguantan bien!

Day 15 wow they are growing so fast Day 16 all girls got a flush we thought we might be putting to much nuts in it Day 17 I still can’t believe how fast these girl’s grow Day 18 all girls growing good Day 20 girls got over watered yesterday so taking the day off Day 21- last day of week 3 and growing great girls got watered today

.

I'm wanting to replace all my miscellaneous lights with another quantum bar rig before my Fall grow this year. Anybody want to buy some gently used lighting gear this summer???😁😎 👉 2 x 100w Cree CXB3590 (3500k) with pin heatsinks - 3 grows usage 👉 1 x 100w Citizen Clu048 COB (3500k) with pin heatsink - 3 grows usage 👉 1 x 120w DIY quantum board (3000k) 256 x LM301b's - no heatsink - used for 2 grows 👉 1 x 60w Bridgelux COB (3500k) - Par38 style - used for 1 day (a back-up bulb) 👉 1 x Morsen 2000w (367w actual) blurple with a bank of 1/6 of the 200 LEDs not working - used 3 grows 👉 1 x Morsen 2000w (367w actual) blurple with only my current grow in use (the replacement) 👉 1 x HeroLight 1500w (285w actual) 5 x COB full spectrum (pinkish-white) - 2 veg stage uses 👉 4 x 36w Par38 type deep red (660nm) bulbs - 3 grows usage 👉 2 x 25w 225 LED panels (660nm) - 3 grows usage 👉 2 x 25w 225 LED panels (440nm) 4 veg stage uses 👉 2 x 25w 225 LED panels (440nm) 👉 1 x 50w 225 LED panel (6500k+440nm) 👉 1 x 20w Par38 style Cree COB (3000k) - (more like a 40w) - used for a week 👉 1 x 15w Sansi blurple Par38 type bulb - used 1 day only 👉 1 x 40w Sansi 4000k daylight Par38 type bulb - used during germination only 👉 4 x 12w MiracleLED red spectrum (4000k daylight + 700nm red) regular light bulb - used during flowering in 2 grows Just hit me up in chat if you are interested in anything- ============================================ SUNDAY 3/31: I foliar fed her a few times and rotated her. Almost have the lighting timers adjusted well enough to keep the PAR high while keeping temperatures low enough for successful flowering. MONDAY: spun her around and foliar fed a few times TUESDAY: I fed her about 3/4 gallon and started her on Open Sesame and Tiger Bloom. Foliar fed a few times and tweaked the timers again.. WEDNESDAY: I foliar fed a few times and rotated her, then took some photos. She's looking sexy!😍 THURSDAY: I foliar fed her a few times and rotated her. FRIDAY: I watered her with about a half-gallon including boomerang, bud candy, calimagic, terpinator, kelp me kelp you, and armor si. She's the most Sativa-looking plant in either of my tents, but still currently winning the race to the finish.

Instead of giving nutrients I gave only water because I noticed some yellow tips on the new growth. The plant had been getting 700ppm feed(including 220ppm tap water). Nutrient buildup in soil? I made the switch to 12/12 today. Since 2 days the new growth has been looking funky - the same corkscrewy thing I had in my first grow. Overall, a lot of trimming, bending, training. It has become a cool plant in my opinion :) Info useful for my question: *6.2-6.4ph water every time *giving water when the soil is dry and lower leaves start to hang a little. but i suspect it is hard to overwater with these airpots *built up nutrients to about 720ppm until last watering

So wir befinden uns am Anfang der 9ten Blütewoche Es ist einfach faszinierend was die für die Größe schaffen. Gerade die Blütephase bei dieser Anbauweise verschafft wohl wirklich viel Entspannung ^^ Es wächst so geschmeidig aber doch sicher. Auch wenn man zu den Zeitpunkten auch schon mal zweifelte, die Natur und ihr Streben geraten in Vollendung. Auch komplett Unterstrichen, dass Blattgut ist dem gesamten lauf über sehr Gesund und somit ein guter Kraftanker für die Pflanze. Allgemein wollten wir in diesem lauf, auch eher natura fahren und mehr Blattgut der Pflanze überlassen. Die SQ1 hat davon sehr positiv profitiert für ihre Größe, wirklich schade das unser erhoffter Streck auf der Strecke blieb. Aber der Fehler wird zu dem Zeitpunkt noch im Boden leben liegen. Aber man kann nur besser werden im besten Fall ;-) Ansonsten gibt es nicht soviel zu Berichten außer, dass die Pflanzen in diesem lauf Lilafarbende Trichome aufweisen :-) Wir sind sehr gespannt und freuen uns schon auf den Smoke Report für euch. Vielen Dank und euch allen eine mega Erfolgreiche kommende Woche! VG

Great week both inside the tent and out this week. Inside they've been fattening and frosting up like crazy. Carl 1 is 50/50 on pistils and still mostly clear trichomes, I'm thinking 2-3 weeks. UKBS 1 is 80/20 on pistils and starting to cloud a little more, I'm thinking 1-2 weeks in that department. Outside, I've built a little greenhouse thing for the plants to chill in, out of the extreme winds. They've been acclimatizing fairly well to the low night temps and very hot days, but that's not to say they're entirely thrilled with it. Hopefully they take fully and flower out well. EOS Rebel T5 shots coming soon, tomorrow or the next day. 6/24/2021- Had some rain overnight, structure held up and kept the moisture out. Came outside to totally dry plants, and it'd been raining for several hours. 6/25/2021- Got the EOS T5 out tonight, got some real good shots of both plants. Carl 1's HUGENESS and UKBS 1's frostiness are definitely showcased well in my opinion. -Timelapse is out this week. Should only be another couple weeks on the indoor plants, probably not enough for a month. (unfortunate as the youtube "Month" Timelapse is going up this week.) 6/29/2021 - Fade on both plants coming in nicely. Purple and yellow on Carl 1, and a much darker color scheme on UKBS 1.

Accidently added week 3 too early. I'll wait a little longer to add the 4th week to even it out. The plants are doing somewhat good but not great. The yellow one is restoring to a fuller green. It seems they all have a little heat stress though and they're not growing as fast as I'd like. If I compare it to my window grow, where my Fast Eddy CBD is just as old as the plants of my outdoor grow. Then Fast Eddy is a lot further. I think they're a bit stunted by the cold in the first week and a half and now it's quite hot for them. Will have to be patient to see how they recover. 8/6 Great growth :D especially on the companion plants. Too bad my plants seem to have some bug problems. I think it's leafhoppers. Especially the 2 x critical CBD are affected, but the sweet CBD that was more lightgreen also seems to be affected.

no new balls. but some seeds