Asi van las cosas hasta el momento; Dia de actualizacion en la semana: 4/junio/20 (dia 29) +Se agrega malla Scrog con 49 Espacios (Se podra completar?) El día 04/06/2020 se han regado 3 plantas en macetas de 11 litros: X2 Semillas Auto Lemon Kix= 1L [1mlKnactive+3ml/L ATAGrowth-C+3mL ATAFlower-C] PH 6.2 / EC= X Tº=23 X1 Semilla Auto Tutankhamon= 1L [1mlKnactive+3ml/L ATAGrowth-C+3mL ATAFlower-C] PH 6.2 / EC= X Tº=23 *El día de hoy se han regado 1 planta en macetas de 7 litros: X1 Semillas Auto Lemon Kix#3 = 550 ml [1mlKnactive+3ml/L ATAGrowth-C+3mL ATAFlower-C] PH 6.2 / EC= X Tº=23 El día 08/06/2020 se han regado 3 plantas en macetas de 11 litros: X2 Semillas Auto Lemon Kix= 1L [1,5mlKnactive+3ml/L ATAGrowth-C+3mL ATAFlower-C] PH 6.1 / EC= 1.17 Tº=23 X1 Semilla Auto Tutankhamon= 1L [1,5mlKnactive+3ml/L ATAGrowth-C+3mL ATAFlower-C] PH 6.2 / EC= 1.17 Tº=23 *El día de hoy se han regado 1 planta en macetas de 7 litros: X1 Semillas Auto Lemon Kix#3 = 550 ml [1,5mlKnactive+3ml/L ATAGrowth-C+3mL ATAFlower-C] PH 6.2 / EC= 1.17 Tº=23

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 (NEW) STRIVE NUTRIENTS 💪

Plants are doing good this week, I started to lower the feed a bit from 1.6 down to 1.2 as some of them are finishing off and the rest are not to far behind noticed a bit of burn on upper leaves suggesting to heavy of a feed as well. Updated the heights on them as well as they grew a tiny bit. Should be the last height update, this is their final form :D #1 - 45cm +2cm #2 - 39cm +3cm #3 - 39cm +2cm #4 - 24cm +2cm #5 - 48cm +2cm #6 - 51cm +2cm Two of the plants have started to show signs they are entering their end stages of life. Hopefully everything else will be ready soon as I do not want to do a staggered harvest. Been noticing its hard to capture the frost on them with my camera as the overhead lights mess up the photo somehow. notice when they are beside the tent with reflected light on them it shows up a bit better so took some individual selfies of them on a back background. Liverwort is also doing well, once this plant is all done I have a feeling its going to like its new home. I want to see how big I can get it, it also have a bunch of smaller off shoots starting now as well beside the main plant, in some of the other pots I also have mosses :D Also PSA: remember to clean your intake filters if you have any, they get dusty and lower your CFM rating of the extractor fans in the tent. and if you use a carbon filter its already getting lowered a lot.

Let plants dry out leaves started yellowing temps are very high so didn't Wana wait too long for harvest 😔

Day 73: Early/mid flower for G. Crack & Mexican.. nearing late for CBD crack. These girls are thirsty, so much watering is happening, but the smell isn't nearly as strong as the first round is even though they are all bigger. This is a test post for videos, next one will be for the contest. Day 75: G-crack 58cm CBD Crack 30cm Mexican Airlines 20cm CBD is closest to maturity. Her leggy stature gives ample opportunity for the different buds to get light. Mex is starting to get fuller buds, but she's short and stout and her leaves are in the way. G is way too large for me to get the right amount of light on her, wish I had defoliated her more, will probably harvest in parts. None of these girls smell as strongly as the previous grow. CBD is a bit diesely but fresh. G is smokey but light right now. Mexican is spicey and woodsy. I can't really place the scents just yet.

Weeks 15 - It’s Ready - The 1st Gorilla Glue Is Ready To Be Havrest, I Gave It 3 Weeks Of Flushing And The Trichomes Of The Top Heads Are Most Cloudy With A Few Clear And A Little Amber Trichomes And The Bottom Buds Are Mostly Cloudy With A Few Clear And The Sceny Is Still At It’s Peak But You could Tell It Was About To Head Over The Morning And Start To Take A Downright Spiral I Will Be Hanging It To Dry For 7-9 Days At A Temperature Of 70 Degrees and 60% Humidity. The Slower It Dries The Better.

I started to clear some fan leaves to help the growth of the bud sites for light penetration. Still hasn’t produced a smell yet, but has lots buddings one side of my topped plant has three mini colas right up against each other.

A wonderful genetic thank you Fast Buds ❤️‍🔥🤩 The trim was super easy the buds are FAT & FROSTY full of resin 🤤 I’m very happy with the harvest 96g !! For the light i’ve used the Spider Farmer SE-7000💡

5-29-19 6-2-19 All is going smooth still. All are stinking, stacking, and looking absolutely stunning. The only "issue", the 2 East Coast Sour Punch are maturing a bit faster than the Popwalkers are. They must be fast finishing phenos is seems. I will let the Popwalkers go as long as possible without the ECSP getting to much amber. One more week of feed, and then I'll start the flush.

July 1: tied one down using 12 gauge wire. Soil might be a bit too rich for two of these three plants with the tied down plant being the best so far.

This week I only watered the plants as needed due to planting them in the Fox Farm Ocean Forest soil. From what I've been told and read I don't believe I "need" to feed them for at least 3-4 weeks but I will watch them closely. Some explosive growth this week! I'm super excited to see 2 of them take off. The third is quite a fighter! I won't give up on her if she won't quit! I'm already having to rethink how I will dry the first 2 plants as the third one will be at least a week, if not 2, behind... I think! I'd love to hear from those who have had an autoflower go through a hard first 3 weeks of sprouting! If you watch the time lapse videos it will help to zoom in a little more and you can see them dance pretty nicely! Here's to health and growth!! Cheers!!

Hello people. It's a very cool variety, delicious strong, and all covered with crystals, even on large leaves. ...................................

Perfect tropical-like weather. No problems to report. Excellent growth. Still rearranging net tent as this bastard stretch a lot. She's a strange big & tall plant, I don't fully understand her, she has a mysterious, almost ancestral scent. The base of the stem is getting huge, I hope the branches get a little more fat. Very mild rust fungus infection on the lower leaves of one branch close to tomatoes

great flower

BEGIN WEEK 8 - Day 50 - 12/11 - Light Water. Day 3 into flowering. Observe red stems. Day 51 - 12/12 - Day 4 into flowering. Red streaks on stem disappearing slowly. Plain Water about a cup. Day 52 - 12/13 - Day 5 into flowering. No Water. Day 53 - 12/14 - Day 6 into flowering. 1.8ml Grow + 1.2 Calmag fed. Red Streaks appear to be stopped growing, looking good progress. Trimmed Fan leaves to expose canopy. Minor adjustment to ties. Day 54 - 12/15 - Day 7 - 1 Week in flowering. Light plain water. About 2 cups. Growth like wild, nice dense green canopy formed. Trimmed lower growth, fan leavs, chopped off weak tops from bottom. Adjusted ties, spaced out the main tops. Day 55 - 12/16 - Day 8 into flowering. Light plain water. Day 56 - 12/17 - Day 9 into flowering. 2ml + 1.2ml Ferts. Plant ajustment and red streaks recovered really good. Overall looking healthy to my rookie vision. END WEEK 8.

GROW 😛 Pruning is growing 😍 Only 3 plants remain small babies. 😵 No more defoliation On DAY 19 : The smallest plant is 47 cm. The largest plant is 112 cm. 😊 --------------------------------------------------------------------------- BLOOM 😍 ALERT : MALE FLOWERS 😥😪😭 on DAY 15 I noticed male flowers on the lowest node.. I removed the male balls manually (+/- 50). Probably a stress response to the strong pruning last week. In the following days I have not seen any new male flowers. -------------------------------------------------------------------------------- WATER + HUMIDITY 😱 +/- 6 liter water / 24 hours / 16 plants / 4 pots Humidifier : +/- 7 liter water / 24 hours

Week 4 What a week again with a lot of sunshine for the plants, but also (finally) some rain. Plants are still inside the greenhouse, so no direct rain onto them. Humidity got raised to 75 from the moment the rain started. I'm tempting to top one of the two plants, but I don't know which one yet. Also going to apply lst to both plants by bending the branches away from each other. I did not fertilize yet for the second time, because I don't want them to grow out of their pots already. I still can't plant them outside, because nights are too chilly. They are thriving anyway, but once they will be in full ground, I'm sure they will even do better. UPDATE: I topped the biggest plant (Mr. High) at the 4th node, so 3 nodes remain with possible 6 new growing points.

Las altas temperaturas han persistido es por esto que el riego ha sido más seguido variando siempre entre fertilizante y agua. Esta vez ya se utilizó Flawless Finish para este último proceso, una vez secándose el sustrato se comienza con la cosecha. Ha sido un buen cultivo. Veremos como termina esto. Seguimos ! 👽💪