The Grow Awards 2026 🏆
Processing
Likes
Comments
Share
@
Follow
Likes
10
Share
@TeesTrees
Follow
Day 71 - I watered her with nutrients, PH was at 5.3. Plant looks very healthy. I think i need to get some stucks to support stem. Day 72 - Checked in the morning properly, the plants looks fine checked for hermies couldn't see anything. Day 73 - I checked her today again nothing that can ruin the whole crop. She was watered with nutrients today at PH 5.9. I got new lights today spider farmer sf2000, this looks amazing inside there. We have also done a bit of light Defoliating so the buds have more nutrients. Day 74 - The plant is fine but the temperature is very high after getting new lights its on 34°c I've order a new fan so i can have inlet and outlet to try cool it down. Day 75 - The plant looks a bit sore thats because i should have watered her earlier. I've given the plant 5.5PH water with nutrients. Day 76 - So once again i didn't take a picture today.  I was very busy and didn't have time. I checked the plants as soon as i woke up and they looked well and healthy. Day 77 - Plants looks well would like it o look like its gonna give me a half decent yield but i don't know let's see how it goes. I also watered her today with nutrients and the water Ph was at 5.5.
Likes
13
Share
Have been flushing the past 2 weeks hence the yellow and purple leaves. Chopping her down right after this photo shoot. Probably get 14-20 grams dry, but not bad for a solo cup auto with pretty quality buds. Stem has been green the whole time— so she’s healthy. The smell is an earthy pine cone. Easy peezy with dynomyco! ✌️💚🌿💨
Likes
22
Share
Getting the Veg game on, these are already flipped for about 3 days beautiful structure on all the unicorns.
Likes
6
Share
Im goong to start a to flush one of my plants this week for 10 days the other one is a few weeks away yet
Likes
9
Share
@Hypnogrow
Follow
Recovery week. Last week everything went to hell this week everything is looking up. Squanch Queen is turning into my favorite one of the bunch. She is super resilient and bounced back quickly, the Skywalker and Quarter Pounder are both going to finish early due to all the stresses and stunting early on in the grow. Squanch Queen looks to be going 9 to 10 weeks inspite of all the issues. Definitely a good strain from Night Owl to pick up if your a beginner, much more forgiving. I definitely want to try the Skywalker again with a better setup. Ph runoff is looking much much better.
Likes
16
Share
I did low stress training on the girl nice clean smoke with a citrus taste overall happy results with stain
Likes
17
Share
@Organic_G
Follow
Wachsen unbesonnen schon gute Blüten Bestände werden aber die Tage rein geholt aufgrund von Schimmel Gefahr und schlechtem Wetter fürs weitere Wachstum, zu kalt und zu feucht
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.
Likes
27
Share
@w33dhawk
Follow
19.07.21 Moin liebe grower Gemeinde hab gestern (Sonntag 18.07.21) die ersten 3 Ladys wieder getoppt und endblättert danach habe ich alle 4 Äste, (bei jeder Lady) versucht auf eine hohe aus zu richten was ganz gut geklappt hat.mir is aufgefallen das alle Ladys gleichmäßige nodien produzieren bis auf purps OG Nr. 3 die hat an einem Ast tatsächlich 4 neue auf einem Haufen wie auf dem Bild zu sehen ist ich gehe Mal davon aus das es durch den Stress verursacht wurde vom toppen,denke Mal das solche Anomalien normal sind und werde den Spass weiter beobachten hab wieder was zum lernen gefunden 😎😎😎😎😎 Mal sehen wie sich das ganze entwickelt denke Mal das ich Mittwoch oder Donnerstag Lady nr.4 in ihren endtopf setzen werde und dann auch gleich weiter Main Laining an den ersten 3 weiter führe. Ach ja zu den 3 Stecklingen in der Mitte habe vor sie die Tage nach draussen zu setzen ich weiss ist ziemlich spät dafür aber ich liebe Experimente, bis die Tage und euch, die alle bald ernten und auf dem Weg dorthin sind wünsch ich ne reichlich Fette Ernte mit glitzernden disco Kugeln🕺🕺🕺🕺🕺😁😁😁😁😁 22.07.21 habe gestern die ersten 3 Tomaten Ringe gebaut sind jeweils 5x35 cm Zaundraht die ich eingedreht habe (also sozusagen eine Öse), habe dann alles nochmal auf gleiche länge geschnitten und mir ein langes Stück Draht ca anderthalb Topfumrandungen lang. Stäbe am Topfrand verteilen wie sie ca stehen sollen und dann den Draht einfädeln und zum Schluss überstehendes mit Kabelbindern (Strapse) fest zurren ezzzz. jetzt stehen die Stäbe ca 14 cm über dem Topfrand. Drückt mir die Daumen das alles so klappt wie ich mir das vorstelle is das erste Mal das ich mit dem Tomaten Ring arbeite. Zu purps OG Nr. 4 die ist heute in ihren endtopf um gezogen, werde Sonntag dort dann auch auf 8 Äste toppen und danach den Tomaten Ring einbauen euch allen noch ne Ernte reiche Woche
Likes
14
Share
Likes
4
Share
* 10/22 -Cherry Cherry Cola Auto - 10/22 - 9.5 Inches * Thus far no concerns and she is growing vigorously, switched out Myco (Using Myco+ from Element) and increased nute and clean water feeds to 1 gallon per day offsetting the clean water and nute water feeds. Lite LST with bend clips applied yesterday (10/21). * End of Week - Veg week 5 - 10/28 - Thus no issues or deficiencies, slight increase of veg dose - Defoliation will begin next week.
Likes
49
Share
@Roberts
Follow
I am attempting to germinate Fast Buds tester FBT 2401. I am dropping it in a cup of water first 24 to 48 hours. She will be growing under a Medic Grow Mini Sun-2. I will update picture when she sprouts. Then start my 1st vegging week shortly after. Thank you Fast Buds for the tester strain. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419
Likes
3
Share
Ya en floración avanzando bien un sutil y agradable aroma tiene y esta muy frondosa seguimos avanzando
Likes
44
Share
Info : Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 37 since time change to 12/12 h. Hey guys :-) Fortunately, she stopped her stretch this week 😅. The lamps would soon not have gone up any further 😂. Now she can concentrate completely on the production of the flowers, which makes her beautiful 👍. I went down with the Ec to 1.2 because I am on the road for two days and it rises well after one day with a slightly higher Ec value. By the time I get back we should be 1.4 - 1.6 Ec :-). PK 13/14 was added to the water which will be completely changed again next week. Otherwise it was cleaned and the health of the plant checked as always. Have fun with the update and stay healthy 🙏🏻 You can buy this Strain at www.Zamnesia.com Type: Runtz ☝️🏼 Genetics: Zkittlez X Gelato 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.2- 6.2 💦 💧
Likes
23
Share
@goeser
Follow
Plants are growing well , İ am just a bit sad that the sun is not so strong the last week. Hope for more sun
Processing
Likes
5
Share
@Georgius
Follow
End of 5th week of flowering. GSC and Tangie by Fairseeds Cheesus by Tomáš Filcka
Likes
38
Share
Hey guys :-) A lot has happened this week :-). She has developed very well. Today it was topped on the main shoot for the first time. How often I will use topping on her, I make it dependent on how everyone else develops. I want to bloom soon so it won't happen very often :-). It was poured twice this week with 1 l each time (for nutrients, see table above). Fast plant spray from GBL was applied 2 times this week. New was added this week Fast Bud from GBL is preparing her for the coming flowering. Bio Grow Stay away for a while because the substrate is 30-50 % consists of fresh earth and the ladies are nice and dark green :-). Today there was another spray with neem oil against the remaining tripse which I will repeat one last time next week. As always, everything was cleaned and checked. Have fun with the update and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/de/hanfsamen/hippie-therapy-cbd Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany