Nothing but water this week. They have slowed down drinking. Think there just about done. Probably chop in the next few days it looks like having two in the earth box is really going to effect yeild. If I was to to this again I would flip when they are much smaller

Decided this week i was gonna keep a 2nd bubba kush seedling that i didn't think was gonna germinate...Gonna get rid of the sour diesel clone....might go back to that strain later..so i will just have KO in this diary..have another diary for the other 2 bubba kush...... also got a quantom board in from alibaba...kinda scary it coming from china but doesn't everything now days...gonna order a few more of the lights for my 4x8 next fall..after this grow probably gonna take July and august off growing maybe keep few clones, but not gonna flower

This out grow for me is extreme, cause daylight time less than 12 hours, Just awful weather, and at night temperature is 15 degrees. Despite all the difficulties Blackberry grows very vigorously and healthy. I am sure this strain will grow in any conditions.Nice genetics. Plant have already started flowering, so fast, and easy strain. For now buds r green, maybe just got the green pheno, or still early and i will see purple colors, color is not important to me. Still weak smells like berries, very tasty. Thanks Fast Buds, nice genetics, and thank to everyone who follow my grow report, Peace!😇

PKBR #2 is showing a couple leaves of what appears to be cal mag issues + senescence fading. I expect I’ll be able to ride it out til finish. It also happens to be the best smelling pheno in the tent at the moment. Drinking has slowed down as stretching ends. Stopped defoliating in any significance after day 21 of flower to minimize herm risks. So far everyone looks happy and healthy Week 11end = 8/10

Unfortunately I didn't get her repotted quick enough and my yield will suffer, bummer. All I can do is push on and see what happens. Just a touch of nutrients for now.

This is my first time growing a kush strain. The growth is explosive. Short and stocky build on this pheno type. I hoping for a great harvest with a tasteful nightcap kind of smoke.

Chiller installed to keep reservoir at 18c constantly. 100ltrs of 18c water also will help bring the ambient temperature down slightly in the room.

"Week three of flower is off to an amazing start! At day 22, the ladies are looking incredibly healthy. They're praying like crazy, reaching for the light, and stacking nodes like it's their job. The buds are starting to plump up, and the trichome production is getting intense. I'm so excited to see how they develop over the next few weeks

13/05/21 -Riego todas las plantas con 1.8 litros de agua y los nutrientes. -He defoliado bastante las plantas ya que hace 2 días descubrí moho en un cogollo por lo que prefiero defoliar y que no vuelva a pasar a dejarlas así y que se vuelva a repetir. El cogollo lo corté inmediatamente y por ahora parece que no ha pasado al resto de la planta. -Los tricomas ya son en su mayoría lechosos 100% y hay 2 plantas que empiezan a tenerlos naranjas. En 2 semanas como mucho empezaré con la primera poda, ya que mi intención es cosechar en 2 tandas, los cogollos de arriba primero y luego los de abajo.

This week was all about watching Tricombes... Her buds are fattening up nicely, especially since she has received no training really.. She is smelling my balcony up with hints of sexyness everywhere.. She has been an absolute pleasure to grow outdoors.. Only issue this week was humidity..It's really difficult to control outdoors...that has been my only challenge.. I brought her in for a few pics.. And this is what she has turned out to ❤️💚❤️💚

Really impressed with dry harvest amount. 7.8 ounces of buds. I used my trim bowl to trim and came out with 3.5 ounces off trim which will be used for edibles. Really sweet smell coming off these buds. They are lovely.

Hola a todos , he aplicado la primera dosis de Myco+ para estimular el crecimiento de las raíces , hay dos plantines que tienen algunas deformidades , hay 21 plantines voy a escoger las mejores 16 para meter al sistemas RDWC Gracias por venir a visitar el jardín 😎

**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8

Things are moving along great outside in the natural sun.These 3 girls are starting to flip and are very strong plants.I haven’t giving much nutrients but will soon top dress.

-Sensi Seeds Research: The Sensi Seeds Research breeding project has created eleven cannabis seed varieties. How? By combining new cannabis cultivars with a selection of strains from their long-established cannabis gene bank. For the first time in thirty-six years, they are opening the doors of the Sensi Seeds Research and Development Department. Week #11, week #3 of Flowering, flowers opening stage is doing well, white hairs spotted everywhere. It’s also the, week 3 trimming, week where you must clean your legs from all the lowers shoots. Technically everything under the trellis must go away ( see on pictures and video ). This is why I recommend to smash your plants under the trellis (see previous weeks, in week 8) to avoid growing long legs. The plants won’t waste any energy on the bottom, everything will be sent to the top, and it creates an airflow under the canopy ( you can add a small desktop fan ) to avoid any mold due to high RH as they are going to start to drink like maniacs in a week or two and to evaporate all this water. Last week of Veg nutrients to finish the stretch with no deficiency, will switch to Bloom nutrients next week. Adding 1gr/plants of Bactrex (Trichoderma) mixed with the solution. Looking the plants, I feel like it’s gonna turn into a big bad bud factory 😎 (I’m looking for a job in the Cannabis industry as Master Grower, Mineralogist, Quality Control 🐞)

Changed out the nutes. Dropped the calmag and the Silica. Using just the Plant Prod MJ bloom. Gorilla Zkittles looks to have one plant that stacking. The other looks like it may be smaller yields. Time will tell and density of the bud definitely changes the weight.

Perfecto muy bonito 😊5 semana

OG 4Q24 Flower Week 9 Orangegasm (Fem) [ IRIE Genetics ] 12/12 @ Bolt (Day 21) Germination: 20 November 2024 #3A Earliest Harvest Date: 9 February 2025 #3B Latest Harvest Date: 19 February 2025 _________________________________________ Start of Week: [Wed Feb 5, 2024 CR2 4Q24 57:F:8:1] End of Week: [Tue Feb 11, 2024 CR2 4Q24 63:F:8:7] OrangeGasm Fertigation: - MAX: EC: [ 2.4, mS] #Ramping Down - LightIntensity MAX: [ 850, µMol/m2/s] ______________________________________ OBJECTIVES - Ramp EC from 2.4 - 1.0 - Start rolling off Primer A&B/Silica Skin to Resin Bloom . . . __ Wed Feb 5, 2025 OG 4Q24 57:F:8:1 EC: 2.3 Notes: #5 looks like a 60 day plant, if so - consider Saturday Harvest … Runoff - [x] Amount: [ 0.125 , gal] - [x] EC: [ 4.4 , mS/cm] - [x] EC∆: [ 2.5 , mS/cm] # Fried Yet? ;-} Harvest Dehu - [x] Amount: [ 1.5 , g] __ Thu Feb 6, 2025 OG 4Q24 58:F:8:2 EC: 2.3 Refresh Reservoir - [x] Amount: [ 2 , g] - [x] EC: [ 2.3, mS/cm] - [x] Primer A&B: [ 31, ml] - [x] Silica Skin: [ 15 , ml] __ Fri Feb 7, 2025 OG 4Q24 59:F:8:3 EC: 2.3 __ Sat Feb 8, 2025 OG 4Q24 60:F:8:4 - [x] Disassemble, Clean Reservoir and Pumps, Reassemble Refresh Reservoir - [ ] Silica Skin: [ 15 , ml] - Dropping Silica Skin due to (sparse to medium) granular precipitate - [x] Amount: [ 6 , g] - [x] EC: [ 2.1, mS/cm] - [x] Primer A&B: [ 100, ml] EC: 2.1 @1900 - Clear Manifold Filter. (Mainline should be cleared on 1845 feed __ Sun Feb 9, 2025 OG 4Q24 61:F:8:5 - [x] Dilute to EC 2.0 - Flooded Tent, 2 Gallons PLUS of Runoff. Happy Plants. - Shout Out Shop-vac. ;-} EC: 2.0 __ Mon Feb 10, 2025 OG 4Q24 62:F:8:6 EC: 1.8 HAND APPLICATION Prepped One Gallon of 12-8-7-5 @ 1.8 mS/cm w/ PhotoSynthesis Plus, SLF-100 Reclaimed Dehu Water, ~2 Gallons Refreshed Reservoir, 2 Gallons Rooted Leaf Hydro no Silica Skin, EC: 1.8 mS/cm Reduced watering to 5 min, then 1 - 1 -1 -1 -1 -1 -1 -1 (It’s not like they’ve been under-fertigated) __ Tue Feb 11, 2025 OG 4Q24 63:F:8:7 EC: 1.7 - [x] EC: [ 1.7, mS/cm2] - [x] Refresh Reservoir - [x] amount: [ 2.5, gal] Runoff - [x] Amount: [ 0.5, gal] - [x] EC: [ 3.6, mS/cm2] - [x] EC∆: [ 0.9, mS/cm2] # Better than 2.5! PLANT POSITIONS 3 5 1 7 4 2 6 8

Growing for FastBuds420 has truly been an honor their genetics are truly Best in the world in my book strange our name beautifully mimicking the smells and appearances of their names. Pineapple express is one . They nailed the name right on the head. This plant truly smells just like a pineapple and almost looks like a pineapple once the fade starts one of the biggest autos I’ve ever grown truly thankful for the opportunity to grow this plant FastBuds420. 4 Life 🌿💨💯